1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1970-81 Rear Spring Shackle Bushing ; Camaro, Firebird, Nova, X-Body
Replace your cracked or worn out original rear spring shackle bushings and bring your rear suspension back to original factory ride specifications. Each bushing is designed and manufactured to replicate the original in...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1970-2005 GM Cars, Trucks; Upper Ball Joint with Hardware; Various Models
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1970-72 Pontiac Firebird; Front End Suspension Rebuild Kit; with Outer Tie Rod Ends Only
This complete front end suspension rebuild kit features a comprehensive assortment of components engineered to replace tired, deteriorated factory suspension parts. Designed to restore proper ride quality, steering response,...
1970-81 Camaro, Firebird; Tubular Lower Control Arm Set; Pair
Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...
1971-2005 GM; Lower Control Arm Bushing; Passenger Car and Truck; Varius Models; Each
Reproduction control arm bushing for the lower control arm on various 1971-05 GM and various other models. Manufactured in steel clad rubber to be pressed into place. If your suspension rattles or makes noises when turning or...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-1969 Camaro and Firebird models, as well as 1968-1979 Nova, 1971-1977 Ventura, 1973-1980 Omega, 1973-1975 Apollo, and 1975-1980 Skylark models equipped with multi...
1967-81 Camaro, Firebird; Rear Shock Extension; Fine Thread; Pair
OER rear shock extenders for 1967-1981 Camaro and Firebird models. These extenders increase rear shock length by 2" and are specifically designed for use when converting from mono leaf springs to multi leaf springs. By...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/8" diameter bar. This versatile sway bar fits a wide range of GM vehicles including Buick Skylark and Special,...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/4" diameter bar. Engineered to significantly reduce body roll, under steer, and over steer during cornering, this...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
1970-73 Camaro, Firebird; Lower Control Arm Bushing Set; 2 Bushings; Various Applications
If your suspension rattles or makes noises when turning or going over bumps, it might be time to think about rebuilding your front suspension. You no longer have to search for obsolete parts because we carry the parts you...
1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336
Reproduction rear stabilizer/swaybar bar link upper bracket for 1969-81 Chevrolet Camaro, Pontiac Firebird and 1969-1970 Chevrolet Nova models. This is the upper bracket that mounts the rear stabilizer/sway bar link to the...
Includes all the components needed to replace the original bushings and hardware. One set services only one side of the vehicle, with two sets required per vehicle. Features a 2" spacer for proper installation and alignment....
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1958-88 Various GM Vehicles Chevelle, Skylark, Cutlass, GTO; Front Sway Bar; Heavy Duty Bracket; WS6
New reproduction of the OEM 1964-88 GM heavy duty front sway bar bracket for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models. See vehicle fitment fort all...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-81 Camaro Z/28, Firebird, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-1969 Camaro Z28 (302), 1968-1981 Firebird 400 and other performance models, as well as Chevy II, Nova, and various GM X body models originally...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
Bolt and nut designed to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened fastener measures 7/16"-20 x 1-15/16" and is engineered specifically for models equipped with the...
1970-05 GM Cars / Trucks; Lower Ball Joint (Standard Size); Thread: 9/16"
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1970-81 Camaro, Firebird; Tubular Upper Control Arm Set; Pair
Enhance the handling performance of your 1970-81 Camaro or Firebird with these quality tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
These sway bars are engineered to reduce body roll, under steer, and over steer during cornering, resulting in noticeably improved handling, stability, and overall vehicle control. Designed to deliver better road feel without...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1967-81 Camaro, Firebird; Rear Shock Extensions; Coarse Thread; Pair
OER rear shock extenders for 1967-1981 Camaro and Firebird models. These extenders increase rear shock length by 2" and are specifically designed for use when converting from mono leaf springs to multi leaf springs. By...
1970-81 Camaro, Firebird, Leaf Spring Eye Mounting Bracket; RH Passenger Side
Reproduction front leaf spring eye mounting bracket for 1970-1981 Camaro and Firebird. Stamped steel construction to factory specifications with correct contours for an OE look and precise fit. Installs at the leading edge of...
1973-91 Buick, Chevy, GMC, Olds, Pontiac; Sway Bar Bracket; Each; Various Models
OER® reproduction of the original style "U" shaped sway bar bushing clamp designed for use with various GM models. This bracket is manufactured from stamped steel and used to hold the inner sway bar bushings and the sway...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1970-05 GM Cars / Trucks; Lower Ball Joint (.0025 Oversize)
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-81 Camaro, Firebird, Nova, GM X-Body; Spring Eye Bracket Nut Kit; 6 Piece Set; Various Models
Quality reproduction spring eye bracket nut kit to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting fastening when paired with the...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1-1/8" diameter...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...
7/16" F436 Washer; Hardened; Heat-Treated; Domestic
7/16" F436 Washer. ASTM F436 covers the chemical and mechanical requirements for hardened washers in diameters ranging from 1/4" to 4" inclusive. These heat treated washers are for general purpose and structural use. For use...
1970-72 Pontiac Firebird; Front End Suspension Rebuild Kit; with Inner & Outer Tie Rod Ends
This complete front end suspension rebuild kit features a comprehensive assortment of components engineered to replace tired, deteriorated factory suspension parts. Designed to restore proper ride quality, steering response,...
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Nut; Each
This is a quality reproduction of the original style spring eye bracket nut used to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1970-81 Camaro, Firebird, 1975-79 Nova; Rear Leaf Spring Installation Set; Multi-Leaf
Reproduction of the original and complete rear leaf spring installation kit designed for use on 1970-81 various GM vehicles equipped with multi-leaf rear springs including 1970-81 Camaro, Firebird, 1975-79 GM X-body models as...
1970-81 Camaro, Firebird; Lower Rear Leaf Spring Pad; Each
Reproduction of the original lower rear leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using quality EPDM rubber compound for long lasting dependability. Always replace...
1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each
Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...
1970-81 Camaro, Firebird, 1971-75 Station Wagon; Upper Rear Leaf Spring Pad; Each
Reproduction of the original upper rear leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using high quality EPDM rubber for long lasting durability, proper cushioning, and...
1961-1994 GM, Ford; Upper Control Arm Bushing; Front or Rear; Various Applications
Reproduction of the original control arm bushing designed for use on the the upper control arm for various 1961-1994 GM and Ford models. Manufactured in steel clad rubber that replicates the original control arm bushing in...
1967-74 Camaro, Firebird, Nova, GM X-Body; Rear Leaf Spring Front Eye Bolts & Nuts ; Pair
Original style reproduction rear spring front eye bolt and nut set for 1967-1974 Camaro and Firebird, 1968-1974 Nova, 1971-1974 Ventura, and 1973-1974 Apollo and Omega models. Manufactured to factory specifications for...
1970-81 Camaro, Firebird, Leaf Spring Eye Mounting Bracket; LH Drivers Side
Reproduction front leaf spring eye mounting bracket for 1970-1981 Camaro and Firebird models. Precision-stamped from heavy-gauge steel to factory specifications with correct OE-style contours for an authentic appearance and...
1969-83 GM; Front Sway Bar Bushing; 1" Inner Diameter; Each
Reproduction front sway bar bushing for various GM models. This rubber bushing includes a 1" diameter hole and is installed on the the front sway bar on most models that included a heavy duty or hi-performance suspension....
1970-81 Camaro, Firebird, 1970-79 Nova, GM X-Body; Rear Spring Shackle Bushing Set; 8 Piece Set
This reproduction rear spring shackle bushing set is designed for 1967-1969 GM models and manufactured in high quality EPDM hard rubber to replicate the factory originals in both fit and performance. These bushings restore...
1967-69 Camaro, Firebird; 1968-81 Nova, GM X-Body; Leaf Spring Liner Set ; 5 Leaf; 8 Piece Set
These leaf spring liners promote smooth, friction free operation once installed, reducing metal to metal contact between the spring leaves. This helps quiet the ride, improve overall driving comfort, and extend the life of...
1967-81 Camaro, Firebird; Leaf Spring Liner Set; with 4-Leaf; 6 Piece Set; OER
These leaf spring liners promote smooth, friction free spring movement once installed. By reducing metal to metal contact between the spring leaves, these liners help quiet the ride, improve overall driving comfort, and...
Spindle Nut & Cotter Pin; 3/4"-20 With 1-1/16" Hex Head
3/4"-20 With 1-1/16" hex head spindle nut and plated 1/8" x 1-1/2" cotter pin for securing drum or rotor to spindle. Kit contains one nut and one cotter pin. 2 kits required per vehicle. {fitment}