1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
1970-1973 Camaro, Firebird; Ni-Terne Coated Fuel Tank; with EEC; 18 Gallon; With Vent Pipes
Reproduction Ni-Terne fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). This OE-quality fuel tank is manufactured in stamped steel to factory specifications featuring a heavy Ni-terne...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1970-73 Camaro, Firebird; Fuel Tank; with EEC; Zinc Coated; 18 Gallon Tank; With Vent Pipes
Reproduction 18 gallon fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emission control). Each fuel tank is manufactured in quality stamped steel to factory specifications featuring a zinc coating...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1970-73 Camaro, Firebird; Fuel Tank Sending Unit; 3/8" Line with 1/4" Return Line
After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how much fuel...
1971-74 Trans-Am Throttle Cables
These throttle cables have the correct ends (carburetor and accelerator pedal) and look very close to the original.
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models
Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...
Correct reproduction fuel tank for 1970-73 Camaro and Firebird models with EEC (evaporative emissions control vapor recovery system). This reproduction fuel tank is manufactured in stainless steel replicating the original GM...
1970-73 Camaro, Firebird; Fuel Tank Sending Unit; Single Line; 3/8"; 6 cyl, 307ci, 350ci
Reproduction of the original fuel tank sending unit designed for use with 1970-73 Camaro and Firebird models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can...
1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float
Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1968-71 Firebird, Trans Am; Quadrajet Throttle Shaft and Choke Set; 3 Piece Set
Reproduction of the original quadrajet throttle shaft and choke set designed for use with various 1968-71 Pontiac models including Firebird and Trans Am models. This show quality set contains the key components to repair or...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1970-73 Camaro, Firebird; Fuel Tank Mounting Straps; Pair EDP
Reproduction fuel tank mounting straps that fit all 1970-73 Camaro and Firebird models. These OE-style straps are manufactured from heavy-duty, pre-formed zinc-plated steel to match the original in quality, design, and...
1970-73 Camaro, Firebird; Fuel Tank Mounting Straps; Stainless Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1970-73 Camaro and Firebird models. Each strap is manufactured in quality stainless steel to original factory dimensions replicating the...
1970-71 Firebird, Trans Am; Throttle Cable Bracket; Ram Air 400 or HO 455 with Turbo 400, Man Trans
Reproduction of the original die stamped throttle cable bracket designed for use with 1970-71 Firebird and Trans Am models with Ram Air 400 or HO 455 with Turbo 400 or manual transmission. Each bracket is manufactured in...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1955-86 Chevy, GMC, Pontiac; Fuel Pump Push Rod; Small Block / Big Block
Reproduction fuel pump push rod for 1955-86 Chevrolet, GMC, and Pontiac models. Fits Chevrolet small block, big block, and Pontiac V8 engines. 5-3./4" long x 1/2" dia. {fitment}
1970-72 Camaro, Firebird; Accelerator Cable Bracket; with Holley Carburetor
Reproduction accelerator throttle cable bracket for 1970-72 Camaro and Firebird models with Holley Carburetor. This quality bracket is manufactured in stamped steel to the original factory configuration. Will fit and install...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
This special mounting pin is just what you need to correct a loose accelerator pad. This OEM design allows the accelerator pad to attach to the accelerator arm correctly and tightly. Replacing this pin will fix the problems...
1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; EDP Coated
Reproduction of the original fuel tank brace set designed for use with 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours...
1970-73 Trans Am; Ram Air Throttle Switch Assembly
Reproduction of the original throttle switch assembly designed for use with 1970-73 Pontiac Trans Am models. This assembly features all the components necessary to replace the original throttle switch assembly that mounts on...
1969-81 Fuel and Brake Line Clip ; Dual Line 3/8" and 1/4"
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1968-81 GM Pedal Pad and Trim Plate Kit; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with automatic transmission. Replacing the...
1968-74 Firebird, Trans Am; Aluminum Rear Carburetor Fitting; with Angled Fitting
Reproduction of the original carburetor rear fitting designed specifically for use with 1968-74 Pontiac Firebird and Trans Am models with 326, 350, 400, and 455 motors with or without Ram Air. This fitting screws to the back...
Correct replacement gasket which is used between the sending unit and the locking ring. We recommend replacing the gasket any time the sending unit has been removed. Fits: 1967-90 models except wagon
1942-86 GM; Fuel Sending Unit Filter Strainer; for 3/8" Pickup Tube
Correct reproduction of the original fuel tank float strainer designed for use with various 1955-85 GM car and truck models. This filter screen will keep dirt and other elements from clogging or entering the fuel system....
Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube
Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...
1970-73 Camaro, Firebird; Fuel Tank Brace Set; 4 Piece Set; Silver Weld Thru Primer
Reproduction fuel tank brace set for 1970-73 Camaro and Firebird models. Each fuel tank brace is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....
Fuel and Brake Line Clip Set ; Dual Line 3/8" and 1/4" ; 7 Piece Set
Correct clip for attaching fuel and brake lines to the frame on various GM models. This clip is made of galvanized steel and is designed to accept one 3/8" and one 1/4" steel fuel line or one steel brake line. Bolt hole is...
1968-79 Accelerator Control Cable Retainer ; Various Models
OER® reproduction of the correct cable retainer used to hold the accelerator control cable. This retainer slips over the cable and clips into the hole on the accelerator pedal arm. Manufactured in injection molded plastic...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
1968-81 GM Pedal Pad and Trim Plate Kit; Disc Brake; Auto Trans; 6 Piece Kit; Various Models
Reproduction of the original pedal pads and pedal pad trim plates to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission....
1972-74 Firebird, Trans Am; Aluminum Carburetor Fitting; with 2 Angled Fittings
Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. Each fitting features the correct GM part number # 487331 stamped on the part for...
1968-75 Firebird, Trans Am; Carburetor Rear Fitting; with Straight Fitting
Reproduction of the original aluminum carburetor fitting designed for use with 1968-75 Pontiac models including Firebird and Trans Am. This particular fitting was used on most all 1968-69 Firebird models, but can also be used...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1969-71 GM Pedal Pad Kit Manual Transmission; With Disc Brakes Emblem - 8 Piece
Reproduction of the original pedal pads designed for 1969-71 Camaro and 1970-71 Firebird models equipped with 3" brake and clutch pedal. Each pad is manufactured to original factory specs! 8 piece set includes the 3" brake...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}
1967-2000 GM; Fuel Sender Unit Lock Ring and Rubber Gasket; 2 Piece Set; Except Station Wagon Models
Reproduction of the original style fuel sending unit lock ring and gasket for use with various 1967-2000 Buick, Chevrolet, Pontiac, and Oldsmobile models. Install the sending unit on your vehicle with a new sending unit lock...