1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
1970-74 Plymouth Barracuda; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
Reproduction of the original wheel opening moldings designed for use with 1970-74 Plymouth Basrracuda models. Each molding is manufactured to correct factory specifications resulting in an authentic appearance when installed....
1971 Cuda; Grill Molding Set; Set of 10 Moldings
Reproduction grill molding set for 1971 Plymouth Barracuda and Cuda models. Each molding is a replication of the original factory moldings that run along the top, bottom, and sides and the moldings that outline the 6 gills of...
1970-71 Barracuda Gran Coupe, 1972-74 Barracuda, Cuda; Rear Tail Corner Molding Set; 2-Piece Set
Reproduction of the original M88 code rear tail corner moldings for 1970-71 Plymouth Barracuda Gran Coupe and 1972-74 Barracuda and 'Cuda models with what Mopar referred to as the "deck lid molding treatment". Each molding...
1970-74 Convertible Barracuda Door Top Edge Moldings Pair - Anodized Aluminum
Factory-style replacement door top edge moldings for 1970-74 Barracuda models. Molding attaches to the outer door and run horizontally along the entire length. This pair of moldings is designed to OE specifications and...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1970-74 Barracuda, Cuda, Challenger; Trunk Lid Molding Hardware Set; with 3 Piece Molding Set
Reproduction of the original hardware designed to install the trunk lid molding for 1970-74 Mopar E-Body models. This hardware set is used to mount the 3-piece molding set that installs onto the deck lid and the rear quarter...
Premier reproduction rear window molding clip set for 1971-73 Barracuda and Challenger coupe. This molding clip set is used to attach the moldings around the rear window to the body of the vehicle. Includes 18 clips, 2...
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
1971 Barracuda, Cuda; Front Fender Louver Gill Mounting Plate; Each
Reproduction of the original front fender louver gill mounting plate for 1971 Plymouth 'Cuda models. Manufactured to OE specifications replicating the original mounting plates. Can be used to convert a non-gill 1971 Barracuda...
Reproduction windshield and rear window molding clips for 1971-74 Dodge and Plymouth Charger, GTX, Road Runner, and Satellite 2 door coupe and 1971-73 C-Body models. Each clip set will replace the rusted or damaged original...
1971 Plymouth Barracuda Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1971-77 Dodge/Plymouth A, B & E-Body; Metal Clip; For Rear Window Reveal Molding; Set of 24
Factory-style replacement rear window reveal molding clip. This steel clip measures 13/16" x 5/8". Replaces OE # 6002893. Set of 24 {specs} {fitment}
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1971-77 Dodge/Plymouth A, B & E-Body; Metal Clip Set; Rear Window Reveal Molding; Set of 12
Factory-style replacement rear window reveal molding clip. This steel clip measures 13/16" x 5/8". Set of 12. {specs} {fitment}
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1971 Plymouth Barracuda, Cuda; Front Grill; with Moldings, and Headlamp Bezels
Reproduction OER™ Authorized of the front grill assembly designed for us with 1971 Plymouth Barracuda and Cuda models. Each grill component is manufactured with injection molded ABS rep;icating the original in quality,...
1971-72 Barracuda/Cuda Rocker Panel Moldings
Factory-style rocker panel moldings mount underneath each door and run from front fender to rear quarter panel. Moldings feature proper polished finish and contours for correct replacement. Sold as a pair. Mounting hardware...
1970-74 Coupe Barracuda; Door and Quarter Top Edge Molding Set ; 4 Piece Set; Anodized Aluminum
Factory-style reproduction of the original door and quarter panel top edge moldings for 1970-74 Plymouth Barracuda models. Molding attaches to the outer door and quarter panel and runs horizontally along the entire length....
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1971-77 Dodge/Plymouth A, B & E-Body; Rear Window Molding Clip
Factory-style replacement rear window reveal molding clip. This steel clip measures 13/16" x 5/8". Replaces early style OE # 6002893 and features green finish. {specs} Dodge Applications: 1971-1973 Dodge Challenger (2 door...
1970-71 Barracuda, Cuda; Tail Panel Molding and Hardware Kit
Factory-style reproduction of the original tail moldings designed for use with 1970-71 Barracuda and Cuda models. Sold as a complete kit, these moldings mount to the rear tail panel. Designed and manufactured to factory...
1970-71 Barracuda, Cuda; Tail Panel Molding Set; 4 piece Set
Reproduction of the original rear tail panel 4-piece molding set for 1970-71 Barracuda and 'Cuda models (except Gran Coupe). Each molding is manufactured in stamped aluminum to original factory specifications. Includes the...
Premier reproduction windshield reveal molding clip set for Challenger and Barracuda models. This factory-style replacement front window reveal molding clip is manufactured in steel to replace the broken, cracked or rusted...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1970 Barracuda, Challenger Coupe; Rear Window Molding Clip Set; Screw-On Style; 20-Piece Set
Reproduction rear window molding clip set for 1970 Dodge and Plymouth E-Body coupe. This molding clip set is used to attach the rear window moldings to the body of the vehicle. Set includes 20 clips with 20 sealing screws....
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
1970-74 Dodge, Plymouth E-Body; Rear Window Molding Alignment Clip: With Wax Tip Sealing Screw
Premier reproduction of the metal alignment clip used to attach the rear window moldings on 1970-74 Dodge and Plymouth E-Body models. This is the 2" long stamped steel clip. Comes finished in the proper phosphate and red dye...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1971-74 Barracuda, Cuda; Door Top Edge Molding Clip Set; 22 Piece Set
Reproduction of the original door edge molding clips for use on 1971-74 Plymouth Barracuda models. Each clip is manufactured in injection molded plastic replicating the original clip. This installation hardware set installs...
1971-74 Mopar Rocker Panel Molding Hardware Set ; A & E-Body Models
Reproduction of the original style hardware needed to install the rocker panels on 1971-74 Mopar E-body models. Each hardware set is designed to replace the broken, bent or missing clips and mounting screws. Rocker panel...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set
Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...
Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...