Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; RH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; LH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the LH (driver side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to protect...
1971-72 Mustang 18 Piece Front Bumper Bolt Mounting Set
This kit has the necessary hardware to install a 1971 or 1972 Mustang front bumper. Attention to detail was taken to ensure that it fits and functions like the original. Set includes: 6 Chrome Bolts 6 U-nuts 6 Washers
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1971-72 Mustang (& 73 without Bumper Guards) Rear Bumper Mounting Set
This kit has all the necessary hardware to install a 1971, 1972 or 1973 Mustang rear bumper. (1973 is for use on Mustangs without bumper guards) Attention to detail was taken to ensure that it fits and functions like the...
1971-72 Mustang; Front License Plate Mounting Bracket; EDP Coated
Reproduction of the original front license plate bracket to mount a license plate to the front valance on 1971-72 Mustang. For use with a standard bumper, each bracket is produced in stamped steel and finished in EDP coating...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
3/8"-16 X 1"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
1971-72 Ford Mustang; Front Fender to Bumper Filler Panels; with Brackets; Pair;
Reproduction front fender to bumper splash shield for 1971-72 Ford Mustang. These Front Fender to Bumper Fillers are designed from originals for a factory correct fit. Fits all cars with chrome front bumper. Molded PVC...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1/2" Hole; GM # 14103461; 25 Pieces
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold in set of 25 pieces. Use as required....
7/16"-14 X 1-3/8"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 7/16"-14 X 1-3/8" and features a stainless steel cap. Head diameter 7/8". Shoulder length...