3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1964-72 Ford F-Series; Bumper Bracket Set; Rear; For StyleSide Truck; F-100 / F-250 / F-350
Reproduction 4-piece rear bumper bracket set for 1964-72 Ford F100, F250, and F350 StyleSide (Fleetside) Pickup Trucks. This set includes both driver and passenger side brackets and hardware. Replaces Ford part#s C4TZ-17787-A...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1966-1977 Ford Bronco License Plate Bracket, Stainless Steel
Reproduction stamped stainless steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; LH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the LH (driver side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to protect...
1971-73 Ford Mustang; Front Bumper Mounting Bracket; Inner; RH
Reproduction stamped steel bumper bracket for 1971-73 Mustang. This front bumper bracket is accurately produced to fit the RH (passenger side) inner position on a 1971-73 Mustang. Comes finished in a black EDP coating to...
1971-72 Mustang 18 Piece Front Bumper Bolt Mounting Set
This kit has the necessary hardware to install a 1971 or 1972 Mustang front chrome bumper. Attention to detail was taken to ensure that it fits and functions like the original. Set includes: 6 Chrome Bolts 6 U-nuts 6 Washers
1971-72 Mustang; Front License Plate Mounting Bracket; EDP Coated
Reproduction of the original front license plate bracket to mount a license plate to the front valance on 1971-72 Mustang. For use with a standard bumper, each bracket is produced in stamped steel and finished in EDP coating...
1971-72 Mustang (& 73 without Bumper Guards) Rear Bumper Mounting Set
This kit has all the necessary hardware to install a 1971, 1972 or 1973 Mustang rear bumper. (1973 is for use on Mustangs without bumper guards) Attention to detail was taken to ensure that it fits and functions like the...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
3/8"-16 X 1"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction bumper bolt mounting kit for 1964-70 Mustang, 1967-68 Cougar, and 1966-77 Bronco models. Each kit contains enough mounting hardware to mount both front and rear bumpers to the bumper brackets. This 28 piece set...
1970-72 Maverick, 1971-72 Comet; Rear Bumper Mounting Bracket Set; RH & LH; Pair
Reproduction of the original rear bumper brackets that connect the rear tail light panel and the rear bumper. Manufactured from high quality steel and coated with EDP black finish for rust protection. These OEM style bumper...
1948-72 Ford F100, F250, F350 Stepside Truck; Rear Bumper Bracket Set; with Hardware
Reproduction rear bumper brackets for 1948-72 Ford F100. F250, and F350 FlareSide (Stepside) pickup truck models. Each bracket is manufactured in stamped steel to correct factory dimensions for an authentic replacement. This...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
1971-72 Ford Mustang; Front Fender to Bumper Filler Panels; with Brackets; Pair;
Reproduction front fender to bumper splash shield for 1971-72 Ford Mustang. These Front Fender to Bumper Fillers are designed from originals for a factory correct fit. Fits all cars with chrome front bumper. Molded PVC...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1966-1977 Ford Bronco; License Plate Bracket, Black
Reproduction stamped steel license plate bracket for 1966-77 Bronco models. These brackets often get bent or lost over time. Bracket attaches on the lefthand side of the vehicle in the recessed area of the tailgate. The...
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish
7/16"-14 x 1" Bumper Bolt with 29/32" Stainless Steel Cap, Zinc Finish. Sold inidvidually.
Original Equipment Reproduction License Plate
Put a highly visible accent on your restoration with a quality aluminum OER® license plate, a recognized symbol of originality and authenticity.
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Sold...
License Plate Mounting Kit; Features Slotted Round Washer Head Screws; (4 Screws, 4 Nuts)
This license plate mounting set comes with four plastic nuts and four screws, which is enough to mount one license plate. These are original style nuts and screws, and they'll make sure your license plate stays securely...
1955-77 Ford; Bumper Bolt; Stainless Steel Cap; 7/16-14 x 1-1/2"; Various Models; Box of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
Push-in retainer clip, also know as a blind rivet for various GM applications. Fits a wide number of applications including front and rear bumper fascia, and other urethane and plastic body components. Fits 1/2" hole. Set of...
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc
7/16"-14 x 1-1/4" Hex Bolt, Grade 5, Zinc chromate finish. Sold individually.
All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"
Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...