Upholstery Installation and Padding Kit; for Rear Bench Seat; 30" x 72" x 1.5" Rolls; Qty of 4
Reupholstery padding kit for rear bench seat. Comes with material to insulate and pad the seat frame before installing new upholstery. NOTE: Hog rings are required when installing new upholstery. Available separately. Refer...
1965-86 GM; Interior Door Panel Clip; White Nylon; Each
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models
Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...
1964-73 GM; Sun Visor Support Bracket; Coupe; with Hardware; Die-Cast; Each
High quality reproduction of the original interior sun visor support bracket designed for use with various 1964-73 Buick, Chevrolet, GMC, Pontiac and Oldsmobile models. Each sun visor bracket is manufactured in quaility...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 GM; Arm Rest Base; Standard Interior; Black; Driver Side; OER; Various Models
OER® reproduction 12" arm rest base for various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the original in fit and...
1968-72 GM; Arm Rest Base; Standard Interior; Black; Passenger Side; OER; Various Models
OER® reproduction 12" arm rest base for various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the original in fit and...
1968-72 Nova, Impala, Bel Air, Caprice; Headliner Bow Clip Set ; 6 Piece Set
Correct reproduction of the original headliner bow clips designed for use on various GM models. These clips are essential for keeping the center headliner bow in the correct location and to secure the dome lamp wiring...
1962-79 GM; Door Panel & Sail Panel Installation Clip; Each; Varius Models
Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...
Correct reproduction of the original outer headliner bow clips designed for use on various Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. Each clip is manufactured in injection molded ABS replicating the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console; Fawn; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console; Lt Blue; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1971-72 Chevelle, El Camino, Nova; Split Bench Front Seat Foam; Back & Bottom; Made in the USA
Reproduction front split bench seat foam for 1971-72 Chevrolet Chevelle, El Camino, Nova and various other GM models without arm rest. Each seat foam is manufactured using automotive-grade foam that matches the original...
1967-74 Impala, Bel Air, Caprice; 1969-81 Blazer; Bow Tie Floor Mat Set; Red ; Set of 4
OER® reproduction of the original Bow Tie floor mats that replicate the originals in every detail! Reproduced to correct factory dimensions, each floor mat is manufactured in quality rubber featuring the Bow Tie logo and...
1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set
OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...
1967-1991 GM; Rear Coat Hooks; Louvered Style; Black; with Screws; Pair
Reproduction of the original style coat hanger hooks designed for use on a variety of 1967-91 General Motors vehicles. Manufactured in quality injection-molded ABS to original factory specifications. These coat hooks feature...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
Seat Foam Sheet; Non-Molded; Universal Fit; 36" x 68" X 1-1/2"
This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; RH
Zinc plated reproduction of the original steel rear arm rest panel for 1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans and 1968-70 Tempest convertible models. This is the panel in the rear quarter that the armrest attaches...
1968-74 Chevy II / Nova Various GM Models Arm Rest Base And Pad Set - OE Style
Reproduction of the original style arm rest base and pad set designed specifically for 1968-74 Nova, X body and other various GM models. Each arm rest base is injection molded as original and will install on the original or...
1968-74 Standard Medium Blue Front Arm Rest Kit
Kit includes 2 arm rest pads and 2 arm rest bases manufactured with modern urethane materials including correct Madrid grains and OEM colors. For mounting hardware use part # 7768478 (sold separately). For 1968 models use...
1968-72 GM" Arm Rest Base; Standard Interior; Medium Blue; Drivers Side; OER; Various Models
OER® reproduction of the original 12" arm rest base for use on various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER® reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile, and Pontiac models from 1968-72. Each arm rest pad is manufactured in quality automotive-grade self-skin urethane featuring the correct Madrid...
OER® reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile, and Pontiac models from 1968-72. Each arm rest pad is manufactured in quality automotive-grade self-skin urethane featuring the correct Madrid...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
72" x 36" Jute Padding Insulation; 40 oz.
Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 72" x 36" and...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
Reproduction Strato seat headrest guides for 1966-72 GM A-Body, 1966-69 GM B-Body, and 1968-71 GM X-Body models. Manufactured to factory specifications, these guides replicate the original design for proper fit, function, and...
1968-72 Arm Rest Base; Standard Interior; Pearl Parchment; Drivers Side; OER; Various Models
OER® reproduction of the original 12" arm rest base for use on various 1968-72 Buick, Chevrolet, Oldsmobile,and Pontiac vehicles. Each arm rest base is manufactured in injection-molded ABS and designed to replicate the...
1971 Chevelle; El Camino; Arm Rest Base; Jade Green; RH
Reproduction RH Jade green arm rest base for 1971 Chevelle/El Camino models and other 1968-72 Buick, Chevrolet, Oldsmobile, and Pontiac models equipped with 12" arm rest base. Each arm rest base is manufactured in...
12 Piece Plastic Firewall Insulation Retainer Set
Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized logo...
1955-81 GM; Firewall Pad Fastener Set; 4 Piece Set
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
Nylon Door Panel Clip Set; Set of 12 Clips
This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...
7 Piece Plastic Firewall Insulation Retainer
Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER® Authorized...
Nylon Door Panel Clip Set; 8 Piece
These clips are designed to attach to the lower door panel. Once installed, the panel is pushed directly into the door frame.The nylon clips will keep the door panel positioned properly after installed. Applications:...
Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized logo...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set ; w/o Console ; Black; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console ; Red ; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console; Med Blue; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console; Dk Green; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1963-64 Impala, Bel Air, Biscayne; Bow Tie Rubber Floor Mat Set; w/o Console; Dk Blue; Front & Rear
OER® quality reproduction of the original style front and rear floor mats designed for use on a variety of early model Chevrolet vehicle. These high quality rubber floor mats are an exact reproduction of the original...
1960-78 Upholstery Installation and Padding Kit For Front Bench Seat
Reupholstery padding kit for front bench seat. Comes with material to insulate and pad seat frame prior to installing new upholstery. Includes: 1 30" x 70" x 1-1/2" thick foam 1 10 lb roll of cotton 4 yards of burlap 4 yards...
1958-81 GM; Door Panel Clip and Plug Set ; 24 Piece Set; Various Models
Reproduction of the interior door panel and rear side panel mounting clips and plugs designed for use on various 1958-81 GM models. Each plug is injection molded and fits into the door panel assembly as original. 24 piece set...
OER® reproduction front armrest pad for various 1968-72 GM models. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain pattern. Will replace the old or...
1968-74 Nova, X Body; Front Arm Rest Pad ; LH ; Black ; Various Models
Reproduction front arm rest pad for the LH drivers side for various GM models including 1968-74 Chevy II and Nova models. Manufactured in quality injection molded urethane material, each arm rest pad is manufactured with a...
1971-72 Chevelle, Malibu, El Camino; Bucket Seat Foam; Seat Back & Bottom; RH or LH Seat; Each
Reproduction of the original style seat foam designed for use on 1971-72 Chevelle, Malibu, and El Camino with front bucket seats. Replacing your worn out original seat foam will not only improve your driving comfort, but also...
1968-74 Nova, X Body; Front Arm Rest Pad ; RH ; Black ; Various Models
Reproduction front arm rest pad for the RH passenger side for various GM models including 1968-74 Chevy II and Nova models. Manufactured in quality injection molded urethane material, each arm rest pad is manufactured with a...
1966-72 GM Vehicles; Upholstery Installation and Padding Kit; Front Bucket Seats
Reupholstery padding kit for 1966-72 various GM models with front bucket seats. Each set comes with material to insulate and pad the seat frames prior to installing new upholstery. Highly recommended whenever adding new...
Front Bucket Seats; Upholstery Installation and Padding Kit
Reupholstery padding kit for front bucket seats. Comes with material to insulate and pad seat frames prior to installing new upholstery. Include enough material to reupholster both front bucket seats on a wide variety of...
OER reproduction arm rest pad found on various Buick, Chevrolet, Oldsmobile and Pontiac models from 1968-72. Each armrest pad is manufactured in quality automotive grade self-skin urethane featuring the correct Madrid grain...
1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans, Tempest Convertible Models; Armrest Lower Panel; LH
Zinc plated reproduction of the original steel rear arm rest panel for 1968-72 Chevelle, Skylark, Cutlass, GTO, LeMans and 1968-70 Tempest convertible models. This is the panel in the rear quarter that the armrest attaches...