Product#: A11774

1965-86 GM; Interior Door Panel Clip; White Nylon; Each

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...


Product#: K624

1960-73 GM; Sun Visor Tip and Bushing Set; 4 Piece Set; Various Models

Tired of sunvisors that won't stay put because the nylon tip is gone? Reproduction of the sunvisor tips and bushings designed for use on various GM models. The sunvisor bushings are manufactured to correct OE specifications...


Product#: K563

1968-72 Nova, Impala, Bel Air, Caprice; Headliner Bow Clip Set ; 6 Piece Set

Correct reproduction of the original headliner bow clips designed for use on various GM models. These clips are essential for keeping the center headliner bow in the correct location and to secure the dome lamp wiring...


Product#: 4500027

1962-79 GM; Door Panel & Sail Panel Installation Clip; Each; Varius Models

Reproduction of the original style door panel installation clips used to install 1967-79 front door panels or for coupe rear quarter sail panels on various GM models. Clips can be used for standard and deluxe interiors. See...


Product#: R894

1962-81 GM Door Panel Clip Retainer Set ; 12 Piece Set

OER reproduction of the interior door panel clip retainers designed for use on various GM models including 1967-81 Camaro and Firebird models. These injection molded rubber plugs are inserted into the door shell to secure the...


Product#: C442

1967-1991 GM; Rear Coat Hooks; Louvered Style; Black; with Screws; Pair

Reproduction of the original style coat hanger hooks designed for use on a variety of 1967-91 General Motors vehicles. Manufactured in quality injection-molded ABS to original factory specifications. These coat hooks feature...


Product#: SF119

Seat Foam Sheet; Non-Molded; Universal Fit; 36" x 68" X 1-1/2"

This universal fit seat foam is a high density sheet suitable for all non-molded bench seats including rear seats and wagon seats. When replacing the seat covers or upholstery in most trucks or vehicles, this non-molded seat...


Product#: B9262L

1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Polished Chrome; Drivers Side

Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...


Product#: B9262R

1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Polished Chrome; Passenger Side

Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...


Product#: F76501

1964-92 Pontiac; Floor Mat Set; Front and Rear; Black; 4 Piece Set

Protect your interior carpet and give your Pontiac vehicle a unique look by adding these custom style floor mats for front and rear. Floor mats are designed for use with virtually all 1964-92 Pontiac Firebird models. Each mat...


Product#: F76508

1964-92 Pontiac Carpet Floor Mat Set; Blue / Black; 4 Piece Set

Protect your interior carpet and give your Pontiac vehicle a unique look by adding these custom style floor mats for front and rear! Floor mats are designed for use with virtually all 1964-92 Pontiac Firebird models. Each mat...


Product#: M10112

1965-70 Impala, Electra, 98, Bonneville, GM B-Body; Carpet Underlay & Sound Deadener Set; EVA; 9 Piece Set

Reproduction of the original style carpet underlay designed for use with 1965-70 Chevrolet, Buick, Pontiac, and Oldsmobile B-Body models including Impala, Bel Air, Biscayne, and Caprice. Each set of carpet underlay is...


Product#: B9263L

1965-70 Impala, GM Full Size; Convertible Sunvisor Support Bracket; Brushed Chrome; Drivers Side

Reproduction of the original sun visor bracket designed for use various 1965-70 Buick, Chevrolet, Oldsmobile, and Pontiac full size convertible models. Each sun visor bracket is manufactured to factory specifications in...


Product#: CMD1002

72" x 36" Jute Padding Insulation; 40 oz.

Jute padding will insulate your interior from noise while helping to maintain an even temperature. For firewalls, floor pans, trunks, doors, and roof panels or other areas of the vehicle. These jute pads measure 72" x 36" and...


1970-76 Chevrolet Impala, Buick Skylark, Oldsmobile Cutlass, Pontiac GTO; End Cover/Cap; Door Pull Strap; Brushed Chrome; Each
NEW

Product#: IN4725Z

1970-76 Chevrolet Impala, Buick Skylark, Oldsmobile Cutlass, Pontiac GTO; End Cover/Cap; Door Pull Strap; Brushed Chrome; Each

Reproduction door pull strap end cap/cover for various 1970-76 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. This is the cover that hides the ends of the pull strap screw and bracket. These covers have...


Product#: *K1119

12 Piece Plastic Firewall Insulation Retainer Set

Reproduction of the plastic push-in firewall pad retainer clips used to attach the pad to the firewall. Dimensions 1" head x 7/16" dia. x 1-7/16" length. Quantities vary by model, use as needed. The OER® Authorized logo...


Product#: *KW272A

1955-81 GM; Firewall Pad Fastener Set; 4 Piece Set

This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...


Product#: *R385

Nylon Door Panel Clip Set; Set of 12 Clips

This special nylon clip is designed to attach to the cardboard backing on standard style interior door panel for various models. Once installed, the panel is pushed directly into the door frame and the clips hold the panel to...


Product#: *K1117

7 Piece Plastic Firewall Insulation Retainer

Set of 7, nylon firewall insulation retainer clips for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Made of durable black nylon plastic. The OER® Authorized...


Product#: 7642589

Firewall Insulation Retainer

Plastic firewall insulation retainer clip for various GM applications. Stem measures 7/16" in diameter x 1-7/16" in length and features a 1" diameter head. Sold individually. Use as required. The OER® Authorized logo...