Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1970-71 Challenger, Barracuda; Convertible Rear Window; Tinted Glass; Crush Vinyl; White
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you receive...
1970-74; Challenger, Barracuda, Cuda; Hood Hinges; with Springs; Pair
Reproduction of the original 1970 Plymouth Cuda hood hinges designed for 1970-74 Mopar E-body models. Each hood hinge is manufactured to exact factory specifications and includes OE style hood hinge springs. Get your hood in...
1970-71 Dodge Challenger, Plymouth Barracuda; Convertible Top; Crush; White
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1970-71 Plymouth Barracuda; Front Bumper; Without Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome front bumper for 1970-71 Plymouth Barracuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating...
1970-74 Plymouth; Barracuda, Cuda; Back Window Glass; Coupe; Tinited
Reproduction of the original style back window glass designed for use with 1970-74 Plymouth Barracuda, and Cuda models. Replace your missing, scratched or broken original vent glass with this new DOT (department of...
1970-71 Barracuda, Cuda; Rear Bumper; without Jack Slots; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1970-71 Plymouth Barracuda, Cuda models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
OER reproduction windshield glass for all 1970-74 Dodge and Plymouth E-Body coupe or convertible models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1970-74 Challenger, Barracuda, Cuda; Front Windshield Glass; Coupe & Convertible; Clear
OER reproduction windshield glass for all 1970-74 Dodge and Plymouth E Body coupe or convertible models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1970 Plymouth Barracuda, Cuda; Hood Latch Assembly; EDP Coated
Reproduction of the original hood latch assembly panel designed for use with 1970 Barracuda and Cuda models. Each hood latch assembly is manufactured in stamped steel to original factory specifications featuring correct...
1965-74 Chrysler, Dodge, Plymouth; Windshield Washer Pump; Replacement
Replacement style windshield washer pump assembly designed for use with the applications listed below. The windshield washer pump circulates water from the windshield washer jar to the washer nozzles. This is a replacement...
1970-74 Plymouth Barracuda, Cuda; Outer Door Handle Set; with Gaskets; RH & LH; Pair
Reproduction of the original outer door handles designed for use with 1970-74 Plymouth Barracuda and Cuda models. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome plating replicating the...
1970 Plymouth Barracuda / "Cuda Front Door Window Regulator, LH
Reproduction of the original front door window regulator designed for use on 1970 Plymouth Barracuda and Cuda models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for use...
1970-71 Challenger / Barracuda Convertible Door Glass RH tINTED
OER reproduction door glass for all 1970-71 Mopar E-Body convertible models. Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Each...
1970-72 Plymouth Barracuda/Cuda; Rear Bumper Guards; Pair
Reproduction of the original rear bumper guards designed for use with 1970-72 Plymouth Barracuda and Cuda models. Enhance the appearance of your Barracuda or Cuda by removing your pitted or damaged originals and installing...
Reproduction manual bullet style remote door mirror for 1970 Plymouth Barracuda, Cuda, and Dodge Challenger models. Each mirror is manufactured in quality die-cast zinc featuring a primered finish, paint to desired exterior...
1970 Barracuda, Cuda, Challenger; Remote Outer Door Mirror; Bullet Style; Primered; LH
Reproduction remote bullet style door mirror for 1970 Plymouth Barracuda, Cuda, and Dodge Challenger models. Each mirror is manufactured in quality die-cast zinc featuring a primered finish, paint to desired exterior color....
1970 Barracuda, Cuda, Challenger; Remote Outer Door Mirror; Bullet Style; Chrome; LH
Reproduction remote bullet style remote door mirror for 1970 Plymouth Barracuda, Cuda, and Dodge Challenger models. Each mirror is manufactured in quality die-cast zinc featuring a bright chrome finish. Each mirror comes with...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1970-74 Challenger, Barracuda, Cuda; Door Window Glass; Coupe, Hardtop; Tinted; RH Passenger Side
OER reproduction of the original door glass designed for use with 1970-74 Dodge Challenger and Plymouth Barracuda, Cuda coupe and hardtop models. Each glass is manufactured with the proper shape, curvature, and pattern in OEM...
1970-74 Challenger, Barracuda, Cuda; Door Window Glass; Coupe, Hardtop; Clear; RH Passenger Side
OER reproduction of the original door glass designed for use with 1970-74 Dodge Challenger and Plymouth Barracuda, Cuda coupe and hardtop models. Each glass is manufactured with the proper shape, curvature, and pattern in OEM...
1970 Barracuda, Cuda, Challenger; Manual Outer Door Mirror; Bullet Style; Chrome; RH
Reproduction of the original manual outer passenger door bullet style mirror designed for use with 1970 Plymouth Barracuda, Cuda, and Dodge Challenger models with the remote mirror option. Each mirror is manufactured in...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1970-74 Plymouth Barracuda, Cuda; Quarter Window Glass; 2-Door Coupe; Tinted; RH Passenger Side
OER reproduction quarter glass for all 1970-74 Plymouth Barracuda and Cuda Coupe models. Each glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original appearance....
1970-74 Plymouth Barracuda, Cuda; Quarter Window Glass; Coupe; Tinted; LH Driver Side
OER reproduction quarter glass for all 1970-74 Plymouth Barracuda and Cuda Coupe models. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while enhancing the vehicle's...
1970-74 Plymouth Barracuda, Cuda; Quarter Window Glass; 2-Door Coupe; Clear; RH Passenger Side
OER reproduction quarter glass for all 1970-74 Plymouth Barracuda and Cuda Coupe models. Each glass is molded in tempered glass with the correct shape and curvature for a precise fit and an authentic original appearance....
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1970-74 Barracuda, Cuda, Challenger; Upper Door Hinge; LH; EDP Coated
Reproduction of the original upper door hinge designed for use with 1970-74 Dodge, Plymouth E-Body models. Manufactured in quality stamped steel replicating the origina l in quality and design. Includes correct mounting...
1970-74 Barracuda, Cuda, Challenger; Lower Door Hinge; RH
Reproduction lower door hinge for 1970-74 Dodge, Plymouth E-Body, Barracuda, 'Cuda, and Challenger models. Manufactured in quality stamped steel replicating the original in quality and design. Features correct mounting holes...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1970-74 Outer Door Mirror Hardware Set ; Mopar B & E Body Models
Reproduction of the original outer door mirror hardware designed for 1971-74 B-Body and 1970-74 E-Body models. Each mirror hardware set includes 4 screws and 4 threaded retainers. This eight piece hardware set will install...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1970-74 Dodge/Plymouth B/E-Body; Inner Fender To Cowl Brace; LH
Reproduction of the original inner fender to cowl brace (metal reinforcement) for 1970-72 B-Body, and 1970-74 E-Body models. This brace is welded in place between the inner fender and the cowl panel which is hidden by the...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1970 Challenger, Barracuda, Cuda; Convertible Anti Rattle Clips; Pair
Reproduction of the anti rattle clips designed to keep the convertible top from rattling on 1970 Challenger, Barracuda, and Cuda convertible models. These go on top of the windshield where the locating pins go in. Each clip...
1970-74 Dodge, Plymouth E-Body; Inner Lower Fender To Cowl Bracket; LH
Reproduction of the original inner fender to cowl bracket that mounts at the lower portion of the inner fender where it meets the cowl panel, Each bracket is manufactured in quality stamped steel featuring the correct...
1970-74 Dodge, Plymouth E-Body; Inner Lower Fender To Cowl Bracket; RH
Reproduction of the original inner fender to cowl bracket that mounts at the lower portion of the inner fender where it meets the cowl panel, Each bracket is manufactured in quality stamped steel featuring the correct...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1963-74 Dodge, Plymouth; Spare Tire Wing Nut
Reproduction of the original spare tire wing nut designed for use with various 1963-74 Dodge and Plymouth models. Each nut is manufactured in stamped steel to factory specifications. Features same design, appearance, and...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1966-74 Dodge, Plymouth A, B, E Body; Remote Mirror Retainer Clip
Reproduction of the original remote mirror retainer clip designed for use with 1966-74 Dodge and Plymouth A, B, and E Body models with remote mirror. Each mirror retainer clip is designed and manufactured in stamped steel...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1970-74 Challanger, Barracuda, Cuda; Inner Front Fender To Cowl Bracket; LH Drivers Side; EDP Coated
Reproduction of the original front fender to cowl bracket for use with 1970-74 Dodge and Plymouth E Body models. Each bracket is manufactured in stamped steel to original factory specifications featuring correct contours for...