Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Bumper Bolt With Nut; Zinc Plated; With Stainless Steel Cap; 7/16-14 X 1-1/4"; 8 Bolt Set With Nuts
Reproduction of the original zinc-plated bumper bolt with a polished stainless steel capped head for a variety of Ford and Mercury applications including 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury Comet...
3/8"-16X 15/16"; Bumper Bolt; Stainless Steel Cap; Flat Head; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1969-70 Mustang; Inner Front Bumper Mounting Bracket; LH Drivers Side
Reproduction of the original inner front bumper bracket designed for use with 1969-70 Mustangs. This bracket is accurately manufactured from quality stamped steel replicating the original in design and fitment. Fits the inner...
1969-70 Mustang; Inner Front Bumper Mounting Bracket; RH Passenger Side
Reproduction of the original inner front bumper bracket designed for use with 1969-70 Mustangs. This bracket is accurately manufactured from quality stamped steel replicating the original in design and fitment. Fits the inner...
1969-70 Mustang; Outer Front Bumper Mounting Bracket; RH Passenger Side
Reproduction of the original outer front bumper bracket for use with 1969-70 Mustangs. This front bumper bracket is accurately produced to fit the RH (passenger side) outer position on a 1969-70 Mustang. Comes finished in a...
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Bumper Bolt with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1" Bolt with Hex Nut
Reproduction bumper bolt with hex nut manufactured in zinc plated material offering an authentic appearance and fitment. Measures 7/16" -14 x 1" and features a stainless steel cap. Head diameter 31/32". Each bolt will replace...
3/8"-16 X 1"; Zinc Plated Bumper Bolt With Nut; 7/8" Flat Stainless Capped Head
This stainless capped bolt features the correct style flat head and features a hex nut. Manufactured in zinc plated material, measures 3/8"-16 x 1" and features a stainless steel cap. Head diameter 7/8". Shoulder length...
7/16"-14 X 1" Bolt With Hex Nut; Zinc Plated; With 29/32" Flat Stainless Steel Cap
This stainless capped bolt is used on both the front or rear, features the correct style head and includes a hex nut. Manufactured in zinc plated material, measures 7/16"-14 and is 1" and features a stainless steel cap. Head...
Bumper Bolt and Hex Nut; with Stainless Steel Head; Zinc Plated; 7 /16"-14 x 1-1/4"
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Correct style push-in clear retainer clip designed for use with various GM applications including 1979-2002 Camaro and 1976-2002 Firebird models. Manufactured to replicate the original GM design in a clear injection molded...
License Plate Mounting Nut and Screw Set; 10 Piece Set; Front and Rear
Correct replacement license plate nylon nut insert & slotted pan head screw used on various GM vehicles. These nuts push into the square hole in a bracket or on valance panel or other sheet metal part to provide a secure...
License plate bracket for 1981-87 Buick Regal. Also commonly used as a universal fit item for trucks or street rods with custom rear roll pans. This bracket, while stock for 1981-87 Buick Regal models, can be used on a wide...
License Plate Mounting Nut And Screw Set, 4 Pieces, (2 Nylon Nuts and 2 Screws)
Correct replacement license plate nylon nut insert and slotted pan head screw used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality...
1970 Mustang Bumper Bolt Mounting Kit Front & Rear (30 pcs)
1970 Mustang. Concours Correct with the right flat bolt tops,just like the original. Each kit contains all the mounting hardware necessary to mount both front and rear bumpers to the bumper brackets. 30 piece kit
1969-70 Ford Mustang; Rear Bumper Mounting Bracket; LH Or RH
Reproduction of the original rear bumper bracket that connects the rear tail light panel and the rear bumper. Manufactured from high quality steel and coated with EDP black finish for rust protection. This OEM style bumper...
1969-70 Mustang; Front License Plate Mounting Bracket
Reproduction of the original front license plate mounting bracket for mounting a license plate on the front valance of your 1969-70 Mustang or 1969 Cougar. It is produced in stamped steel for longevity and strength. Can be...
1969-70 Mustang; Outer Front Bumper Mounting Bracket; LH Drivers Side
Reproduction of the original outer front bumper bracket for use with 1969-70 Mustangs. This front bumper bracket is accurately produced to fit the LH (drivers side) outer position on a 1969-70 Mustang. Comes finished in a...