1970 Dodge Charger Front Grill Assembly
OER reproduction of the grill assembly designed for use on 1970 Dodge Charger models with concealed headlamps. Manufactured in injection molded ABS materials and includes stamped steel headlamp door brackets just like the...
1970 Dodge Challenger; Complete Front Grill; with Surround and Filler Panel
Quality reproduction of the grill designed for 1970 Dodge Challenger models. Each grill is manufactured to factory specifications replicating the original in appearance and fitment and features correct trim around the outer...
1970 Dodge Coronet; Front Grill Set (Pair); Coronet Deluxe, R/T, 500, Super Bee
Reproduction 1970 Dodge Coronet and Super Bee front grill assemblies. Manufactured in gray injection molded plastic, each grill set includes both LH and RH sides, and is finished in argent silver and black in the correct...
1970 Coronet Deluxe, R/T, 500, Super Bee; Front Grill; LH Driver Side
OER reproduction 1970 Coronet and Super Bee front grill for the LH, driver side. Manufactured in gray injection molded plastic and is finished with argent silver and black in the correct accent areas to replicate the original...
1970 Dodge Challenger; Front Grill Assembly
Quality reproduction of the original front upper grill designed for use with 1970 Dodge Challenger models. Each grill is manufactured to factory specifications replicating the original in appearance and fitment. Features...
1970 All Makes All Models Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
1970 Charger Grill Assembly with Headlamp Doors
OER reproduction of the 1970 Dodge Charger grill and headlamp door assembly for models with concealed headlamps. Manufactured in high-pressure injection-molded plastic and supplied with OE-style stamped steel headlamp door...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1970-71 Front Grill Assembly ; Dodge Dart, Demon
Authentic reproduction of the original 1970-71 Dodge Dart and Demon grill. Correctly manufactured in black injection molded ABS material for an authentic appearance and fit. Grills are finished in argent silver in the correct...
1970 Coronet Deluxe, R/T, 500, Super Bee; Front Grill; RH Passenger Side
OER reproduction 1970 Coronet and Super Bee front grill for the RH, passenger side. Manufactured in gray injection molded plastic and is finished with argent silver and black in the correct accent areas to replicate the...
1970 Charger Center Grill Bracket with Hidden Headlamps
OER reproduction of the original 1970 Dodge Charger center grill support bracket designed for use on Charger models with concealed headlamps. Each grill support bracket is manufactured in stamped steel with correct mounting...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
1970 Dodge Challenger; Grill Filler Panel
Reproduction of the original front grill filler panel designed for use with 1970 Dodge Challenger models. Each filler panel is manufactured to correct factory specifications and will replace the old or worn out original...
1970 Dodge Challenger; Front Grill Surround
Reproduction of the original front grill surround designed for use with 1970 Dodge Challenger models. Each surround is manufactured to correct factory specifications and will replace the old or worn out original exactly....
1970-71 Dart and Demon Headlamp Bezel ; RH
OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on RH passenger side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the...
1970-71 Dart and Demon Headlamp Bezel - LH
OER reproduction of the original 1970-71 Dodge Dart and Demon headlamp bezel for use on LH drivers side. Each headlight bezel is manufactured in black injection molded ABS plastic, and finished in argent silver in the accent...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1970 Charger Grill Hardware Set ; 46 Piece Set
Reproduction of the original hardware components designed to install a 1970 Dodge Charger grill. Installing youc Chargers grill is easier when you have the correct hardware. Each hardware set includes the correct mounting...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Push Pin Retainer; 5/8" Diameter Head; For 1/4" Hole; Each
Reproduction push-pin style retainer for various Ford models including 1970 Mustang models to fit the grill to the headlamp bracket among other uses. Use wherever a 5/8" head diameter push-pin type fastener is required. Fits...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"
Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...
1970-71 Dart, Demon Front Grill Set ; with Headlamp Bezels
This OER reproduction grill is designed to replicate the original 1970-71 Dodge Dart and Demon grill. Each grill is manufactured in injection-molded ABS to exact specifications of the Mopar original. The grill and headlamp...
1970 Charger Headlamp Door with Concealed Headlamps - LH
OER reproduction of the original 1970 Dodge Charger headlamp door assembly designed for use on 1970 Charger models with concealed headlamps. Each headlamp door assembly is manufactured in injection-molded ABS material and...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
1970 Charger Headlamp Door Assembly with Concealed Headlamps - RH
OER reproduction of the original 1970 Dodge Charger headlamp door assembly designed for use on 1970 Charger models with concealed headlamps. Each headlamp door assembly is manufactured in injection-molded ABS material and...
# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head
Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...
1970-71 Dart, Demon; Park Lamp Lens and Bezel; RH Passenger Side
OER reproduction of the 1970-71 Dart and Demon drivers side park lamp bezel. Manufactured in clear acrylic material matching the original design. Includes a black injection molded ABS bezel, and finished in argent silver in...
1970 Charger Grill Bracket Set
OER reproduction of the 1970 Dodge Charger grill "L" brackets. Manufactured in stamped stamped steel just like the original factory Mopar part. Each bracket features 2 square retainer nuts spot welded in place and includes 2...
1970 Charger Headlamp Door Crank Rod - with Hidden Headlamps
OER reproduction of the original 1970 Dodge Charger headlamp crank rod for use on models that included factory concealed headlamps. Includes a 2" slotted rod that acts as a pivot for the headlamp door. Manufactured in stamped...
1970 Charger; Headlamp Door Hardware Set; 12 Piece; For Hidden Headlamps
OER reproduction of the 12-piece headlamp door hardware set for 1970 Dodge Charger. Set includes the (2) headlamp door stop adjusting screws, (2) small plastic bushings, and (2) large plastic bushings for headlamp door pivot...
1970-71 Charger Headlamp Door Bumpers with Concealed Headlamps Set of 4
OER reproduction of the 1970-71 Dodge Charger headlamp door bumpers for models with concealed headlamps. Manufactured in rubber just like the factory Mopar item. Sold as a set of four. One set required per car. Note: Coming...