Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
1970-76 Dodge, Plymouth, A, B, E Body; Door Lock Striker Bolt; 2 Door; Each
Correct reproduction of the original door lock striker bolt designed for use on all 1970-76 Dodge and Plymouth A, B, and E body 2 door models as listed. The door lock striker bolt is manufactured to correct factory dimensions...
1970 Dodge Challenger Front Door Window Regulator, LH
Reproduction of the original front door window regulator designed for use on 1970 Dodge Challenger models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for use with OEM or...
1967-70 Dodge, Plymouth A, B-Body; Front Outer Door Handle Set; with Black Buttons
Reproduction of the original outer door handles designed for use with various 1967-1970 Dodge and Plymouth A, B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished...
1968-70 Dodge, Plymouth; Door Striker Plates; with Screws
Reproduction door striker plates originally installed on 1968-70 Dodge and Plymouth B-Body models. Each plate is manufactured in stamped steel and zinc coated for long lasting dependability.
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1970-74 Barracuda, Cuda, Challenger; Upper Door Hinge; LH; EDP Coated
Reproduction of the original upper door hinge designed for use with 1970-74 Dodge, Plymouth E-Body models. Manufactured in quality stamped steel replicating the origina l in quality and design. Includes correct mounting...
1970-74 Barracuda, Cuda, Challenger; Lower Door Hinge; RH
Reproduction lower door hinge for 1970-74 Dodge, Plymouth E-Body, Barracuda, 'Cuda, and Challenger models. Manufactured in quality stamped steel replicating the original in quality and design. Features correct mounting holes...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Reproduction flat style phillips head machine screws for latches and strikers on various classic makes and models. Fits the door striker on 1947-51 Chevrolet and GMC truck models. Fits the door latch on various 1966-74 Dodge...
1970-74 Dodge Challenger; Outer Door Handle Set; with Gaskets; RH and LH; Pair
Reproduction of the original outer door handles designed for use with 1970-74 Dodge Challenger models. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome plating replicating the original OE...
1970 Dodge Challenger Front Door Window Regulator, RH
Reproduction of the original front door window regulator designed for use on 1970 Dodge Challenger models. All stamped steel construction, features correct splined shaft and correct retaining screw threads for use with OEM or...
1966-70 Dodge, Plymouth B-Body; Front Door Window Regulator; 2 Door; Drivers Side
Reproduction of the original front window regulator designed for use with various 1966-70 Dodge and Plymouth 2 door models. Manufactured to OEM specifications from stamped steel construction, each regulator features the...
1969-2002 Nylon Rod Clip, Fits 5/32" Rod Diameter; 1/4" Hole Size; LH Driver Side; Varius Models
Reproduction of the clip that retains the two inner door lock rods. This nylon clip joins the horizontal rod from the door latch with the verticle rod that the door lock knob screws on to. Sold individually. One required per...
1966-70 Dodge, Plymouth B-Body; Front Door Window Regulator; 2 Door; Passenger Side
Reproduction of the original front window regulator designed for use with various 1966-70 Dodge and Plymouth 2 door models. Manufactured to OEM specifications from stamped steel construction, each regulator features the...
1968-81 GM; Door Glass Roller Washer; Various Models
Reproduction plastic washer that pushes through the door glass on various 1968-81 GM models. Exact reproduction of the original door glass roller washer. Sold individually. Use as required. Replaces OE # 4491087.
1970-74 Barracuda, Cuda, Challenger; Lower Door Hinge; LH
Reproduction lower door hinge for 1970-74 Dodge, Plymouth E-Body, Barracuda, 'Cuda, and Challenger models. Manufactured in quality stamped steel replicating the original in quality and design. Features correct mounting holes...
1970-74 Barracuda, Cuda, Challenger; Upper Door Hinge; RH; EDP Coated
Reproduction of the original upper door hinge designed for use with 1970-74 Dodge, Plymouth E-Body models. Manufactured in quality stamped steel replicating the origina l in quality and design. Includes correct mounting...
1968-70 Dodge, Plymouth B-Body; Door Latch and Lock Clip Set
Reproduction of the various components required to help keep your door latch operating smoothly. Replacing the door latch and lock clips will help keep your doors operating properly just the way the factory intended. Includes...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 2.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1968-70 Mopar Striker Plate Shim 1.50MM ; B-Body
Correctly stamped reproduction of the original 1968-70 striker shim plate designed for use on B-Body models. Manufactured in die-stamped steel with zinc plating for corrosion resistance. Designed to shim the door striker...
1968-70 Mopar Striker Plate Shim.60MM ; B-Body
Correctly stamped reproduction of the original 1968-70 striker shim plate designed for use on B-Body models. Manufactured in die-stamped steel with zinc plating for corrosion resistance. Designed to shim the door striker...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Tinted Glass; LH, Driver Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1969-77 Chrysler, Dodge, Plymouth; Power Window Switch; 4 Window; Concave Buttons
Reproduction of the original power window switch designed for use on 1969-77 Mopar Dodge, Plymouth and Chrysler models designed to install in the drivers side front door. This switch is manufactured with original style...
1968-70 Dodge, Plymouth B Body; Door Lock Knob Ferrules; Pair
Reproduction of the original door lock knob ferrules designed for use on 1968-70 Mopar B- body models. Each ferrule is manufactured in stamped stainless steel that replicates the original in quality and design. The ferrules...
1966-74 Dodge, Plymouth; A, B, E Body; Lower Door Hinge Spring; Each
When you are rebuilding your door hinges don't stop at pins and bushings, make sure you replace those worn out springs at the same time. Replace the worn out hinge spring with this reproduction designed to fit and function...
1964-98 GM; Door Lock Striker Bolt Shim - 4.00MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Clear Glass; LH, Driver Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Tinted Glass; RH, Passenger Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1968-70 Dodge, Plymouth B-Body Hardtop; Vent Window Assembly; Clear Glass; RH, Passenger Side
Reproductionl vent window frame assembly for various 1968-70 Dodge and Plymouth B-Body models except convertible. Each window frame is manufactured in die-cast metal and finished in bright polished chrome. This assembly...
1970-74 Challenger, Barracuda, Cuda; Lower Door Hinge Pillar; LH; EDP Coated
Reproduction of the original lower door hinge pillar for use with 1970-74 Dodge and Plymouth E body models. Each lower door hinge pillar is manufactured in stamped steel to original factory specifications featuring correct...
1970-74 Challenger, Barracuda, Cuda; Lower Door Hinge Pillar; RH; EDP Coated
Reproduction of the original lower door hinge pillar for use with 1970-74 Dodge and Plymouth E body models. Each lower door hinge pillar is manufactured in stamped steel to original factory specifications featuring correct...
1966-76 Dodge, Plymouth; A, B, E Body; Door Hinge Repair Kit
Replacement door hinge pin and bushing set for various 1966-76 Dodge and Plymouth A, B and E-Body models. The components in this kit will restore proper door alignment and provide for quieter operation when opening and...
1968-76 Dodge, Plymouth A-Body; Door Lock Ferrules; Pair
Reproduction door lock knob ferrules for 1968-1976 Mopar A-body models. Each pair of ferrules are manufactured in injection molded ABS that replicates the original in quality and design. The ferrules snap into place on the...
1966-70 Dodge, Plymouth B Body; Rear Quarter Window Roller & Hardware Set; 2 Door
Reproduction of the original quarter window glass rollers for use on 1966-70 Dodge and Plymouth B-body 2 door models. Manufactured from high quality injection molded material with precision machined and stamped steel...
1970-72 Barracuda, Cuda, Challenger; Door Window Hardware Set; 26 Piece Set
Replace damaged or missing original door window components with this comprehensive hardware set designed to replace old or worn out door window hardware. This kit is designed for use on 1970-72 Mopar E body models. Replace...
1970-74 Mopar Quarter Window Roller Set ; E-Body ; 6 piece set
Reproduction of the original quarter window rollers designed for use on 1970-74 Mopar E-Body models. Each set includes all the necessary hardware and rollers to repair the both RH and LH rear quarter windows. Includes 2...
1959-1993 GM; Door Inside Locking Rod Clip; Various Models; Each
This replacement lock rod clip is designed to hold the door lock knob rod assembly to the lower rod assembly which pivots up and down when the door lock knob is raised or lowered. This is an essential part that is required in...
1970-73 Mopar Door Glass Guide; E-Body
OER reproduction of the original door window glass guide designed for use on 1970-73 Dodge/Plymouth E-Body models. Manufactured in quality injection molded ABS plastic to factory dimensions. This glass guide installs on the...