1959-72 GM; Radiator Hose Clamp; Tower Style; 2-1/4" Diameter
Reproduction 2-1/4" diameter tower style upper radiator hose clamp. This clamp is reproduced to exact factory specifications measuring 2-1/4" in diameter for use on a variety of radiator hose applications. This style tower...
1969-74; Camaro, Impala, Nova; Upper Radiator Hose; with GM Markings
Restore authentic cooling system performance and factory-correct underhood detail with this reproduction upper radiator hose for select 1969-74 Chevrolet small block applications. Precision molded from premium grade rubber to...
1969-79 Camaro, Impala, Nova, Corvette; High Performance Fan Clutch; 7-1/4"
Reproduction, application specific, factory-style high performance thermal fan clutch for various 1969-79 Chevrolet vehicles with 7-1/4" diameter fan clutch. This reproduction is not a cookie-cutter universal part. Each fan...
1969-73 Camaro, Chevelle, Nova; Water Pump Pulley; Deep Single Groove; 3976060
Reproduction of the factory water pump pulley for various 1969-73 models. This single groove pulley measures approximately 6-1/4" in diameter. Fits 1969-70 Camaro Z/28, 1970-71 Camaro, 1970-73 Z/28 350 Special High...
Replace your old hose with this quality molded hose designed with the correct bends for a factory-style fit, routing, and appearance. This is a service replacement style hose intended for dependable performance, and it does...
1970 Chevrolet Big Block; Water Pump Pulley; Long Pump; Shallow Single Groove; 6-1/4" O.D.; 3976059
Reproduction factory long water pump pulley for 1970 Camaro 396 big block engines and various other Chevy applications. This is a single groove pulley that measures approximately 6-1/4" in diameter. For models with or without...
1970-74 GM; Fan Spacer; For Fixed Fan; 2-9/32"
Correct reproduction of the original style 2-9/32" (2.28") fan spacer designed for engines without a fan clutch. Each fan spacer is manufactured to OE specifications. Measures 2-9/32" thick excluding the fan locator / pilot....
1969-79 GM; Fan Spacer; For Fixed Fan; 2"
Reproduction of the original style 2" fan spacer designed for engines without a fan clutch. Each fan spacer is manufactured to OE specifications. Measures 2" thick excluding the fan locator / pilot. Bolt spacing measures...
1968-70 Impala, Bel Air, Biscayne, Caprice; Molded Upper Radiator Hose; Small Block;
Replace your old hose with this quality molded hose designed with the correct bends for a factory-style fit, routing, and appearance. This is a service replacement style hose intended for dependable performance, and it does...
Radiator Hose Clamp; Tower Style; 2-5/16" Diameter
Reproduction 2-5/16" tower style radiator hose clamp. This clamp is reproduced to exact factory specifications and includes the correct style clamp with attaching screw. Measures 2-5/16" in diameter. This style tower clamp...
1959-72 GM; Radiator Hose Clamp; Tower Style; 2-1/16" Diameter
Reproduction 2-1/16" diameter tower style radiator hose clamp. This clamp is reproduced to exact factory specifications and include correct style clamp with attaching screw. Measures 2-1/16" in diameter. This style tower...
Radiator Overflow Tank; Stainless Steel; Universal 3" x 10"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
Universal Radiator Overflow Tank; Stainless Steel; 2" x 13"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
1969-86 Chevrolet Small Block; Long Water Pump; Polished Aluminum
This polished aluminum water pump features a new casting with quality bearings and excellent sealing. Each unit features a highly polished finish to add a dash of flash to your engine compartment. For use with Chevrolet small...
Authentic OER® reproduction radiator cap for the enthusiast who wants total originality. Each cap is manufactured to exact factory specifications including the correct verbiage "TURN TIGHT" "REMOVE SLOWLY" along with the...
Universal Radiator Overflow Tank; Stainless Steel; 2" x 15"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
Universal Radiator Overflow Tank; Stainless Steel; Universal 3" x 16"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
Universal Radiator Overflow Tank; Stainless Steel; 2" x 17"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
Universal Radiator Overflow Tank; Stainless Steel; 2" x 19"
The OER® Authorized logo represents products that meet or exceed stringent OER® quality control standards. This item has been sanctioned and approved by OER®.
1960-76 GM, Chrysler; Radiator Overflow Hose; 3/8" ID; 3-Rib Design; 3 Foot Length
This is a "3-rib" correct replacement hose for the radiator overflow. It is produced with correct 3/8" ID OEM style thin walled hose as original. This is an often overlooked hose which is notorious for deterioration. The hose...
1969-81 GM; Fan Spacer; for Fixed Fan; 1-1/2"
Reproduction of the original style 1-1/2" fan spacer designed for engines without a fan clutch. Each fan spacer is manufactured to OE specifications. Measures 1-1/2" thick excluding the fan locator / pilot. Bolt spacing...
1966-82 GM; Heater Hose Clamp; Tower Style; For 3/4" Hose; 1-3/16" Diameter
Reproduction 1-5/16" diameter tower style hose clamp for various models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 3/4" heater hose and 1966-1982...
Reproduction of the original 1959-1972 tower style hose clamps. Includes all eight clamps needed to completely replace radiator and heater hose clamps. This authentic tower clamp reproduces the original profile and fastener...
Radiator And AC Rubber Well Nut, 1/4-20 Thread, Fits 1/2" Hole, Pair
Correct replacement radiator and AC mounting well nuts used on various GM vehicles. 1/4-20, fits 1/2" hole. Neoprene with captive brass nut. Correct hardware can make any installation job easier. Replace your missing or...
Heater Hose Clamp; Tower Style; For 5/8" Hose; 1-1/16" Diameter
Reproduction 1-1/16" diameter tower style hose clamp for various applications on 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 5/8"...
Reproduction radiator retainer pad for a wide variety of 1968-81 GM models. Keeps the radiator in place and safe from loosening while cushioning and protecting the metals from wear due to rubbing together or vibration. Sold...
Reproduction of the original Corbin spring ring heater hose clamps and tower style radiator hose clamps. Includes all eight clamps needed to completely replace radiator and heater hose clamps. Correct hardware simplifies...