1970-73 Camaro Rally Sport; Front Bumper Nose; Urethane Reproduction; Made in the USA
OER reproduction of the original front urethane nose assembly designed for use with 1970-73 Chevrolet Camaro models equipped with the Rally Sport (RS) front end. Manufactured to OE specifications, this assembly features a...
1970-73 Camaro; Rally Sport Front Bumper; Chrome; 2 Piece; Pair
Reproduction Rally Sport split front bumper for 1970-73 Camaro RS models. Each bumper is manufactured to factory specifications that replicate the original bumpers in quality, fitment and authenticity. Bumpers are finished in...
1967-70 Camaro, Nova, Firebird; Bumper Jack Assembly & Base
Exact reproduction of the original bumper jack assembly for various GM models including Camaro, Chevy II, Nova, and Firebird models. Each component is designed to replace the original and includes the jack base, jack stand,...
Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
Reproduction of the original outer door remote mirror bracket designed for use with 1970-1981 Camaro, Firebird, 1970-1974 Nova, 1970-1979 Vega, and 1975-79 Monza models originally equipped with the optional remote outer door...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1970-74 Camaro and Firebird Glass Kit - Smoke
Reproduction glass kits with windshield (w/built-in antenna), back window and door glass for 1970-74 models. These kits are just what is needed to replace all the glass in a 1970-74 Camaro. All glass panels are carefully...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
Reproduction of the original remote outer door mirror designed for use on various 1970-81 GM models including Camaro, Firebird, Nova, LeMans, GTO, Cutlass, 442, and others. Each mirror is manufactured from high-quality...
1970-73 Camaro; Trunk Lock Bezel ; Chrome
Manufactured in quality zinc die-cast metal and chrome plated replicating the factory original bezel. Replace the old , worn out or rusted bezel with this quality reproduction. Will fit and install as original. Refer to part...
1970-74 Camaro/Firebird; Glass Kit; Coupe; Clear
Reproduction glass kits with windshield (w/built-in antenna), back window and door glass for 1970-74 models. These kits are just what is needed to replace all the glass in a 1970-74 Camaro. All glass panels are carefully...
1970-73 Chevrolet Camaro; Front Spoiler; with Standard Front End; Except RS Models
OER® reproduction of the original front spoiler designed for use with 1970-73 Camaro standard models (non-RS). This reproduction spoiler is manufactured in quality injection molded ABS replicating the original in design....
1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models
Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...
1970-73 Camaro Z28; Rear Spoiler; One Piece; OER
Reproduction of the original one piece rear spoiler designed for use with 1970-73 Camaro Z28 models. When the Camaro body style changed in 1970, so did the rear spoiler, there were now two designs instead of one. There was a...
Flush mount front windshield glass for 1970-81 Camaro and Firebird models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer stainless trim. Designed to...
1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1970-81 Camaro, Firebird; Center Rear Spoiler; OER; GM Licensed
Reproduction center section of the rear spoiler for 1970-81 Camaro and Firebird models with a 3 piece (high style) spoiler. Each spoiler is manufactured to OE specifications replicating the original in quality, appearance and...
1970-73 Camaro; Outer Rear Spoiler; LH Drivers Side; OER
Reproduction of the optional rear spoiler designed for use with all 1970-73 Chevrolet Camaro models. Installs on the LH rear quarter panel section. Each spoiler is manufactured to OE specifications replicating the original in...
1970-81 Camaro / Firebird; Hood Hinge Assembly; RH Passenger Side; EDP Coated; OER
Reproduction hood hinge for 1970-81 Camaro and Firebird models. Replace your original bent hood hinge with this superb quality OER® reproduction hinge. Original hood hinges can bend or become damaged over time, making...
1970-81 Camaro, Firebird; Door Latch Assembly; LH Driver Side
OER® reproduction of the original door latch assembly designed for use with 1970-81 Chevrolet Camaro and Pontiac Firebird models. Over time, the factory door latch can become worn or damaged, causing issues with smooth...
1970-73 Camaro; Rear Spoiler Kit; Tall Design; 3 Piece Set; OER
Reproduction rear spoiler kit for 1970-73 Camaro models except Z28. When the Camaro body style changed in 1970, so did the rear spoilers. There were now two designs instead of one. There was a single version (low) for Z28...
1970-81 Chevy Camaro; Splash Guard Kit; Front & Rear; with Welting
Add a front and rear splash guard kit to your 1970-81 Camaro or Z-28 to protect against stone chips, splash and other flying debris. These aftermarket guards are designed to match the style and shape of the 1978-81 Z-28...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1970-81 Camaro, Firebird, Impala; Upper Front Door Hinge; RH Passenger Side; Various Models
This OER® reproduction door hinge restores proper door operation on 1970-81 models. The factory doors were extremely heavy and often caused the original hinges to wear or sag over time. Replacing them with this...
1970-81 Camaro, Firebird; Front Door Window Guide Roller Assembly; Rear
Reproduction of the correct window guide roller designed for use with all 1970-81 Camaro and Firebird F Body models. Manufactured to factory specifications featuring correct roller with stud. Installs on the rear section of...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
OER® reproduction of the original style 18" Trico windshield wiper blades designed to fit 3/16" side-lock connector arms. This blade is an exact reproduction for various GM models including 1970-81 Camaro, Firebird,...
1970-72 Chevrolet Camaro; Front Bumper Guards; Standard; Pair
Reproduction of the original front bumper guards designed for use with 1970-72 Chevrolet Camaro standard models (except Rally Sport). Each guard is manufactured to original factory specifications in quality heavy duty stamped...
1970-81 Camaro, Firebird; Outer Windshield Glass Support; Each
Reproduction of the original windshield glass support for use with 1970-81 Camaro and Firebird models. This stamped galvanized steel support is used to position and support the windshield glass. Features correct rubber coated...
1970-73 Camaro; Chrome Front Bumper; with RS Option; 2 Piece; OER Premier™
OER Premier™ reproduction chrome front bumper for 1970-73 Camaro Rally Sport (split bumper) models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer....
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
1970-73 Camaro; Base, LT, Z28; Rear Bumper; Chrome; OER Premier; Show Quality
OER Premier chrome rear bumper for 1970-73 Camaro models. This reproduction bumper is designed exclusively for the restorer who demands the best the market has to offer. Features superior triple chrome plating that exceeds OE...
1970-74 Camaro, Firebird; Rear Window Glass; Tinted
Reproduction rear window glass for 1970-74 Camaro and Firebird models. Each back glass is manufactured to correct factory OE specifications offering an authentic appearance and fitment. Manufactured with tempered safety...
1970-75 Camaro, Firebird, Impala; Outer Door Handle; Die-Cast Chrome; RH Passenger Side
Reproduction of the original outer door handle designed for use with various 1970-75 GM models including Camaro, Firebird, Impala, and additional GM passenger vehicles. Each handle is precision manufactured from durable...
Brand New Reproduction wiper motor built using the industry's most advanced engineering technology. Core shortages and low availability have made our brand new replacement wiper motors the high quality, low cost alternative...
1978-81 Camaro; Inner Front Fender Skirt; LH Driver Side; EDP Coated
Reproduction of the original inner front fender skirt designed for use on 1970-77 Chevrolet Camaro models. Manufactured in quality stamped steel to OE factory specifications replicating the original in appearance and fitment....
1970-81 Camaro, Firebird; Front Door Window Glass; Clear; LH Driver Side
Reproduction of the original front door glass window for use with 1970-81 Chevrolet Camaro and Firebird models. Each glass is manufactured to correct factory specifications featuring the correct curvature for an authentic...
Reproduction of the original front windshield glass for use with 1970-81 Camaro and Firebird models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1970-81 Chevrolet Camaro; Rear Quarter Panel Splash Guards; RH & LH; Pair
Add rear splash guards to any 1970-81 Camaro to protect against stone chips, water splash and other flying debris. These aftermarket guards are manufactured in quality automotive-grade urethane and designed to match the style...
1970-81 Chevrolet Camaro; Chrome Fender to Radiator Support Bars; RH & LH; with Hardware
Enhance both strength and style under the hood with these highly polished chrome fender to radiator support bars. Designed to install from the fenders to the radiator support on each side, these braces provide essential...
1970-81 Camaro, Firebird; Front Door Window Glass; Clear; RH Passenger Side
Reproduction of the original front door glass window for use with 1970-81 Chevrolet Camaro and Firebird models. Each glass is manufactured to correct factory specifications featuring the correct curvature for an authentic...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1970-74 Camaro, Firebird; Rear Back Window Glass; Clear
Reproduction rear window glass for 1970-74 Camaro and Firebird models. Each back glass is manufactured to correct factory OE specifications offering an authentic appearance and fitment. Manufactured with tempered safety...
1970-73 Camaro; Standard Front Bumper; except Rally Sport; 1 Piece Bumper
Reproduction of the original 1 piece front chrome bumper designed for use on 1970-1973 Camaro models with standard front ends (non-RS). Each bumper is manufactured to replicate the original in every detail. This reproduction...
1970-81 Chevrolet Camaro; Front Fender Splash Guards; RH & LH; Pair
Add front splash guards to any 1970-81 Camaro to protect against stone chips, water splash and other flying debris. These aftermarket guards are manufactured in quality automotive-grade urethane and designed to match the...
1970-73 Chevy Camaro; RS Front License Plate Bracket; with Rally Sport Front End
Reproduction of the original front license plate bracket designed for use on 1970-73 Camaro Rally Sport (RS) models (with split front bumper). This bracket is manufactured in stamped steel and features an EDP coating for rust...
Reproduction of the original front windshield glass for use with 1970-81 Camaro and Firebird models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
Aftermarket style lower front spoiler extensions for use with 1970-73 Chevrolet Camaro standard models (with 1 piece bumper design). Manufactured in quality automotive grade material for an custom appearance. For use with...
1970-81 Camaro, Firebird; Front Windshield Glass; with Built-In Antenna; with Mirror Bracket; Clear
Reproduction of the original front windshield glass for use with 1970-81 Camaro and Firebird models. This windshield is manufactured with tempered laminate safety glass that meets the standard for protection against road...
1970-72 Camaro; Front Bumper Bracket Set; 4 Piece Set; with Hardware & Cushions; Except RS Models
Restore proper front-end structure and fitment with this high-quality reproduction front bumper bracket set, designed specifically for 1970?1972 Chevrolet Camaro Base, SS, and Z/28 models without the Rally Sport (RS) option....
1970-73 Chevrolet Camaro; Center Front Spoiler; for RS Split Bumper; Aftermarket Custom Design;
Aftermarket front spoiler designed for use with 1970-73 Chevrolet Camaro Rally Sport models. This spoiler is similar to the OEM design, but features a deeper width then the original GM spoiler. Attaches to the lower valance...
1970-73 Chevrolet Camaro; Center Front Spoiler; Standard; Aftermarket Custom Design; Except RS
Aftermarket front spoiler designed for use with 1970-73 Chevrolet Camaro standard (non-RS) models. This spoiler is similar to the OEM design, but features a deeper width then the original GM spoiler. Attaches to the lower...
