1967-72 Chevrolet/GMC Truck; Outer Heater Box; Without Factory AC
Reproduction outer heater box for 1967-72 pickup models without factory AC. May also be able to be used on vehicles with certain aftermarket AC units with under-dash evaporator unit. Installs in the engine compartment against...
1967-72 Chevrolet, GMC Truck; Heater Control Panel; without AC; Silver
Reproduction of the original style dash heater control assembly for use with 1967-72 Chevrolet and GMC truck models without air conditioning. Manufactured to correct OE specifications featuring correct DEF, AIR FAN, and HEAT...
Original reproduction style heater core assembly for use with various 1967-1972 Chevrolet, GMC pickup, Blazer, Jimmy, and Suburban models with air conditioning. Each heater core is manufactured to correct factory...
1955-74 GM; Heater Hose Clamp; 3-3/4" Wide; Stainless Steel ; wih Hardware; Various Models; Each
This handsome stainless steel clamp can be used to hold the two heater hoses to the inner fender well on various vehicle models. A perfect upgrade for the unsightly original equipment style clamp or to add a custom touch to...
1967-72 Chevrolet/GMC Truck, Blazer, Jimmy, Suburban; Dash Defroster Vent; Chrome; LH
Reproduction dash defroster vent for 1967-72 Chevrolet and GMC truck models. Each vent unit is manufactured to correct factory dimensions replicating the original vent in design, appearance, and fitment. Features a chrome...
1967-72 Chevy, GMC Truck, Blazer, Jimmy, Suburban; Dash Defroster Vent; Chrome; RH Passenger Side
Reproduction dash defroster vent for 1967-72 Chevrolet and GMC truck models. Each vent unit is manufactured to correct factory dimensions replicating the original vent in design, appearance, and fitment. Features a chrome...
Replacement heater core assembly designed for use with various 1967-1972 Chevrolet, GMC pickup, Blazer, Jimmy, and Suburban models without air conditioning. Each heater core is manufactured to correct factory specifications...
Replacement heater core assembly designed for use with various 1967-1972 Chevrolet, GMC pickup, Blazer, Jimmy, and Suburban models with air conditioning. Each heater core is manufactured to correct factory specifications in...
1967-72 Chevrolet/GMC Truck, Blazer, Jimmy, Suburban; Heater Control Panel Cable Set; With AC
Reproduction heater control panel cables for 1967-72 Chevrolet & GMC pickup, Blazer, Jimmy, and Suburban models with air conditioning. Each cable set is manufactured to factory specifications offering an authentic fitment...
1969-70 Chevrolet; Front Air Conditioning Compressor Brace Bracket; Big Block 396, 427
Reproduction of the original front air conditioning compressor bracket designed for use with various 1969-70 Chevrolet cars and trucks with 396, 427, 454 big block models. Each brace is manufactured in quality stamped steel...
1965-77 GM; Various Models; Dash Vent Ball; Chrome; with or without AC
Reproduction chrome vent ball for various 1965-77 GM models. Manufactured in injection molded ABS to original factory specifications. Each vent ball is chrome plated and features correct black vents matching the original for...
Heater Hose Bracket Set; Various GM Applications
This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. These heater...
1967-72 Chevrolet, GMC C/K Pickup; Inner Heater Box Assembly; For Models Without Factory AC
Reproduction inner (under dash) heater box assembly for 1967-72 Chevrolet, GMC truck and SUV models without factory AC. Each assembly is stamped in steel to the correct factory original GM configuration for a proper fit and...
1959-79 GM; Heater Hose Set; with GM Markings; Various Models
High-quality reproduction of the original style heater hose set, designed to replace the worn or missing original hoses with factory-correct specifications. Each set includes the proper 3/4" and 5/8" diameter hoses, ensuring...
1958-72 Chevrolet; Ribbed Heater Hose Set; OE Design; Small Block & Big Block
Reproduction of the original and correct ribbed style heater hoses designed for use with various 1958-72 Chevrolet models as listed. Each heater hose is manufactured to correct factory specifications offering the original...
Original reproduction style heater core assembly for use with 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models as listed without air conditioning. Each heater core is manufactured to correct factory...
1965-77 Chevrolet Dash Vent Ball Seal Set; 4 Piece Set; Various Models
Reproduction vent ball felt seals designed to replace the worn vent ball strip seals to help to keep air leakage around the vent ball to a minimum. The strips should be replaced whenever replacing the vent ball assemblies....
1966-82 GM; Heater Hose Clamp; Tower Style; For 3/4" Hose; 1-3/16" Diameter
Reproduction 1-5/16" diameter tower style hose clamp for various models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 3/4" heater hose and 1966-1982...
Heater Hose Clip for Inner Fender Skirt; Various GM Applications
This hose clip is designed to secure a pair of heater hoses to the inner fender skirt to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. This heater hose clip was original equipment on...
1965-81 Chevy, GMC, Pontiac; Dash Heater Control Knob Set; Chrome; Set of 4; Various Models
OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded ABS and...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy; Dash Center Air Vent; with AC; Chrome
Reproduction center dash air vent for 1967-72 Chevrolet and GMC truck models with factory air conditioning. Each vent unit is manufactured in quality die-cast zinc and chrome plated matching the original in appearance and...
1967-72 Chevrolet, GMC Truck; Kick Panel Vent Door Assembly; Drivers Side
Reproduction of the original kick panel vent door assembly designed for use with 1967-72 Chevrolet and GMC truck models. Each door assembly is manufactured in stamped steel to the original configuration featuring a steel...
1961-81 GM Vehicles; Multi-Purpose Relay; For HVAC Blower Motor; 4 Terminal
Reproduction multi-purpose relay for a wide variety of uses and vehicle applications, including as a blower motor relay among other uses. Due to excessive heat and electrical loads the relay may become inoperative, leaving...
1969-70 Chevrolet; Front Air Conditioning Compressor Bracket; Big Block
Correct reproduction of the original front air conditioning compressor bracket for various 1969-70 Chevrolet models with big block engines. This heavy cast iron bracket mounts to the front of the head. Replaces original GM...
1964-72 Chevelle, Camaro, Impala, Truck, Blazer; Blower Motor Resistor; with AC; Various Models
OER Reproduction heater motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component, designed to fit and function just like the original AC Delco resistor. The...
1965-81 Chevy, GMC, Pontiac; Dash Heater Control Knob Set; Black; Set of 4; Various Models
OER® reproduction of the original dash heater control knobs designed for use on various 1965-1989 GM models. Each knob is reproduced to exact dimensions and cosmetically correct. Manufactured in injection molded black ABS...
1967-72 Chevrolet, GMC Truck; Dash Vent Bezel; with AC; Chrome; LH; Driver Side
Reproduction dash side air vent bezel for 1967-72 Chevrolet and GMC trucks with deluxe interior and factory air conditioning. Each vent bezel is manufactured in injection-molded ABS and featuring a bright chrome finish....
Reproduction of the original dash side air vent bezel designed for use with 1967-72 Chevrolet and GMC trucks with factory air conditioning. Each vent bezel is manufactured in injection-molded ABS replicating the original...
Reproduction of the original 1959-1972 tower style hose clamps. Includes all eight clamps needed to completely replace radiator and heater hose clamps. This style tower clamp was originally used from 1959-1972, however they...
AC Evaporator Box Resistor and Relay Screws; 10-16 x 5/8"; 1/4" Hex Head; Pair
Reproduction of the original style heater box blower motor resistor and relay mounting screws for various 1938-83 GM models with screw-on style resistors. Also used to mount the blower motor relays on most 1961-79 GM models....
Replacement wire harness and pigtail for various 1947-2005 Ford and General Motors vehicles. For reproduction or original blower motor resistors. This harness connector can be used with the following heater blower resistors;...
Heater Hose Clamp; Tower Style; For 5/8" Hose; 1-1/16" Diameter
Reproduction 1-1/16" diameter tower style hose clamp for various applications on 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 5/8"...
1967-72 Chevrolet, GMC Truck; Kick Panel Vent Door Assembly; Passenger Side
Reproduction of the original kick panel vent door assembly designed for use with 1967-72 Chevrolet and GMC truck models. Each door assembly is manufactured in stamped steel to the original configuration featuring a steel...
1968-91 Buick, Chevy, Pontiac, Olds; Blower Motor Resistor; w/o AC; Various Models; 1968 2nd Design
Reproduction heater blower motor resistor for various GM air conditioned models. Each resistor is an exact reproduction of the original GM component designed to fit and function same as the original AC Delco resistor. The...
1967-72 Chevrolet, GMC Truck; Dash Vent Bezel; with AC; Chrome; RH; Passenger Side
Reproduction dash side air vent bezel for 1967-72 Chevrolet and GMC trucks with deluxe interior and factory air conditioning. Each vent bezel is manufactured in injection-molded ABS and featuring a bright chrome finish....
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Dash Vent Bezel; with AC; Black; LH; Driver Side
Reproduction dash side air vent bezel for 1967-72 Chevrolet and GMC trucks with factory air conditioning. Each vent bezel is manufactured in injection-molded ABS replicating the original appearance. Will install as original...
Reproduction 2 1/4" heater hose bracket for a wide variety of GM models from 1938-93. This hose bracket is designed to secure two heater hoses to the alternator bracket to prevent damage of the hoses and keep the engine...
1965-72 Chevrolet, GMC, Pontiac; Dash Vent Bezel Deflector Retainer Adapter Seal; Various Models
Reproduction dash vent bezel retainer adapter for various GM models. The dash vent bezel adapter is manufactured in quality injection molded ABS plastic replicating the original in fitment and functionality. This adapter is...