1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1968-72 Chevrolet/GMC C/K Truck; Vent Window Assembly with Tinted Glass; LH
OER® Authorized reproduction of the original side vent window assembly designed for use on 1968-1972 Chevrolet and GMC truck models. Each vent window assembly will replace the complete vent window glass and frame unit....
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
1967-87 Chevrolet, GMC Stepside Pickup Truck; Chrome Rear Bumper
Reproduction of the original chrome rear bumper designed for use with 1967-87 Chevrolet and GMC Stepside pickup truck models. Each bumper is manufactured to original factory specifications replicating the original in design,...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-72 Chevrolet/GMC Truck Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3 piece stainless steel screw set for mounting the outer door side mirror arms on 1947-72 Chevrolet and GMC trucks. One set per mirror arm required. Note: Not for use on 1970-72 door mirror assemblies....
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; Chrome; LH Driver Side
Upgrade the look of your 1967-72 Chevrolet or GMC truck with this custom reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped to original GM...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1968-72 Chevrolet/GMC C/K Truck; Vent Window Assembly; with Tinted Glass; RH
OER® Authorized reproduction of the original side vent window assembly for 1968-1972 Chevrolet and GMC truck models. Each vent window assembly will replace the complete vent window glass and frame unit. Includes all...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1967-70 Chevy Pickup, Blazer, Suburban; Front Bumper ; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-70 Chevrolet pickup, sedan delivery, Blazer, and Suburban models. This reproduction bumper is designed exclusively for the restorer...
1967-87 Chevy, GMC Stepside Pickup; Rear Bumper; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome rear bumper designed for use on 1967-1987 Chevrolet and GMC Pickup truck models. This reproduction bumper is designed exclusively for the restorer who demands the best...
1947-72 Chevrolet/GMC Truck; Round Door Mirror Head; Chrome; Smooth Backing
Reproduction exterior round mirror head for 1947-72 Chevrolet & GMC truck models. This reproduction mirror head is design to replace the worn out or missing original. Features a chrome backing with a 5" smooth, non-ribbed...
1970-72 Chevrolet/GMC Truck; Outer Door Mirror Kit; LH
Reproduction outer door side mirror assembly for 1970-72 Chevrolet and GMC truck models. Each mirror is manufactured in quality die-cast zinc and chrome plated offering an authentic appearance and fit. Includes the mounting...
1970-72 Chevrolet/GMC Truck; Outer Door Mirror Kit; RH
OER® Authorized reproduction of the original outer door side mirror assembly for use with 1970-72 Chevrolet and GMC truck models. Each mirror is manufactured in quality die-cast zinc and chrome plated offering an...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
OER Premier™ reproduction chrome rear bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed exclusively for the restorer who demands...
Reproduction front bumper guards for 1967-72 Chevrolet/GMC pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic original equipment...
1967-72 Chevrolet, GMC Pickup; Back Window Glass; Flush Mount; Glue-In; No Molding Needed; Clear
Flush mount back window glass for 1967-72 Chevrolet or GMC C/K-Series "Big Window" pickup trucks. This custom made back window glass is manufactured slightly larger than the original allowing you to eliminate the outer...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy Pickup, Blazer, Suburban; Front Bumper Guards; with Hardware; Pair
Reproduction front bumper guards for 1967-72 Chevrolet pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic appearance. Includes...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Green Tint; w/o Band
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Clear
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1947-79 GM; Various Models; Chrome Drop Mount Peep Mirror; LH Or RH; 4"
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4 inch mirror head. Fits sedan and truck...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; RH Passenger Side
Restore the factory look of your 1967-72 Chevrolet or GMC truck with this premium reproduction inner front fender skirt. Designed for Pickup, Blazer, Jimmy, and 1967 Suburban models, this panel is precisely stamped from...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; LH Driver Side
Bring back the authentic factory look of your 1967-72 Chevrolet or GMC truck with this high-quality reproduction inner front fender skirt. Designed to fit Pickup, Blazer, Jimmy, and Suburban models, this panel is...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1960-72 Chevrolet, GMC Truck; Door Latch Screw Set; 12 Piece Set; 6 Screws, 6 Washers
OER® Authorized reproduction door latch screws and lock washers for 1960-72 Chevrolet and GMC truck models. Screws are 5/16"-18 thread, measure 3/4" in thread length and 1 inch in overall length. Set of 6 screws and 6...
1967-72 Chevrolet, GMC Fleetside Pickup; Rear Roll Pan; with License Plate Pocket & 2 License Lamps
Customize the rear end of your Chevrolet or GMC pickup truck with this quality roll pan with license plate pocket. This roll pan is manufactured in quality stamped steel for a precise custom fit. Features an EDP coating for...
1967-72 Chevy, GMC Pickup. Blazer, Jimmy, Suburban; Windshield Wiper Motor Transmission Arm Assembly
Reproduction windshield wiper motor transmission arm assembly for 1967-1972 Chevrolet and GMC truck models. Each assembly is manufactured to original GM specifications, replicating the factory design, quality, and fitment. A...
1967-72 Chevrolet, GMC Fleetside Pickup; Tailgate Latch Assembly Set
Reproduction of the original components required to get your tailgate latch working again for 1967-72 Chevrolet and GMC Fleetside models. This reproduction tailgate latch set includes (1) latch handle, (2) latch rods, (2)...
Replacement style stainless steel capped bumper bolt and nut designed for use on many GM vehicles. Each bolt measures 1/2"-13 x 1-1/2"; 1-1/8" head diameter and comes complete with attaching nut. Can be used for a wide...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Newly tooled heavy duty heat treated OER Premier reproduction hood hinge assembly set for 1967-72 Chevrolet and GMC truck models. Each hood hinge set has been re-tooled to be a perfect replication of the factory original that...
1967-71 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Manual Window Regulator; RH Paassenger Side
OER® Authorized reproduction of the original door window regulator designed for use with 1967-71 Chevrolet and GMC pickup, Blazer, Suburban, and Jimmy models. Each regulator is manufactured to OE specifications and...
1967-72 Chevy, GMC Pickup Truck; Back Window Glass; with Large Window; Tinted Glass; 14" x 60; C10
Reproduction of the original back window glass designed for use with 1967-72 Chevrolet and GMC pickup models with large back window glass. Each rear window glass is manufactured to factory specifications featuring correct...
1967-72 Chevrolet, GMC Truck; Front Door Hinge; Upper; RH
Reproduction of the original upper door hinge assembly designed for use with 1967-72 Chevrolet and GMC trucks. Manufactured in quality heavy gage stamped steel replicating the original door hinge in quality and design....
Reproduction door latch assembly for 1967-71 Chevrolet and GMC truck models. Each door latch assembly is manufactured in stamped steel to OEM specifications. Includes door latch assembly, relay mechanism and rods. Your door...
1967-72 Chevy, GMC Pickup; Back Window Glass; Large; Dark Smoke Tint; Limo Style; 14" x 60"; C10
Reproduction of the original back window glass designed for use with 1967-72 Chevrolet and GMC pickup models with large back window glass and dark smoke tint (limousine style). This glass measures approximately 14" x 60"....
1954-87 Chevrolet/GMC Truck; Tail Gate Trunnions; Stepside
Reproduction lower trunnions designed for 1954-1987 Chevrolet and GMC stepside pickup truck models. Each trunnion is manufactured to original factory specifications and plated for long lasting dependability. The trunnions...
1967-91 Chevy, GMC Pickup, Blazer, Suburban; Bracket; License Plate; Rear; Chrome Plated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1967-72 Chevrolet, GMC Truck; Lower Glass Channel; LH Driver Side
Reproduction of the original lower glass channel for 1967-72 Chevrolet and GMC truck models. Each channel is manufactured to original factory specifications offering an original appearance and fit. This is lower channel that...
1967-72 Chevrolet, GMC Truck; Lower Glass Channel; RH Passenger Side
Reproduction of the original lower glass channel for 1967-72 Chevrolet and GMC truck models. Each channel is manufactured to original factory specifications offering an original appearance and fit. This is lower channel that...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
Reproduction of the original front door window glass designed specifically for use with 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Each glass is manufactured to correct factory specifications...
1967-72 Chevrolet/GMC Truck, Suburban; Door Latch Striker Plates; LH And RH
Reproduction door latch striker plates for 1967-72 Chevrolet & GMC truck, Panel, Blazer, Jimmy, and Suburban models. Each striker plate is manufactured in quality stamped steel to original factory specifications. Will replace...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1955-72 Chevrolet, GMC Pickup Long Bed; Bed Mounting Pad Set; 1/2 Ton; 10 Piece Set
Keep the truck bed in proper alignment by replacing the old or worn out mounting pads. This mounting pad set is designed for use with 1947-72 Chevrolet and GMC 1/2 ton pickup trucks with long bed. Each set contains the...