1962-73 GM; Flywheel Pan Cover; Torque Convertor Cover; with Powerglide Trans
OER® reproduction of the original flywheel pan (also called a torque converter cover) for use with various 1962-73 Chevrolet models. Each flywheel pan cover, aka the torque drive convertor cover is manufactured to OE...
Reproduction '621' 11" bellhousing kit for various models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For Chevrolet big block or small block engines equipped with an 11" clutch. Replaces original GM...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
Turbo 350; Transmission Dipstick And Tube; 27" Long
This chrome plated dipstick with tube for the GM turbo hydromatic 350 transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Powerglide Transmission Dipstick; Firewall Mount; Flexible; Stainless Steel
You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. Each...
Kickdown Cable; with TH350 Trans; Stainless Braided; 55" long
Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
1966-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 66"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1966-1990 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models. This reproduction speedometer cable is manufactured to original GM specifications...
Reproduction speedometer cable and casing for various 1966-91 models including Camaro, Firebird, Skylark, Cutlass plus Chevrolet & GMC trucks. Each cable is manufactured to correct factory specifications for proper fitment...
1969-87 Chevy, Olds, Pontiac; Transmission Shifter Bracket; TH350/TH400 Trans; Various Models
Reproduction of the original shift lever designed for use with 1969-87 Chevrolet passenger car and truck models. This lever connects the automatic shifter cables and linkages to a TH350, or TH400 transmission. For use with a...
Correct reproduction of the original swivel assembly designed for use with 1965-67 Impala, Bel Air, Biscayne, Caprice, and 1964-72 Chevy II Nova models with automatic transmission rod linkage with floor shift. Includes a...
1964-1990 Buick, Chevy, Pontiac, Olds; Speedometer Cable; 69"; Push-On Style; OER
Reproduction of the original speedometer cable designed for use with various 1964-1990 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. This reproduction speedometer cable is manufactured to original GM...
1964-1981 Chevrolet; Clutch Housing / Flywheel Cover ; for 11" Bellhousing
Reproduction of the original style clutch housing and flywheel cover plate designed for use on a variety of 1964-81 Chevrolet models as listed. Manufactured in stamped steel to original specifications that replicate the...
1964-83 Chevrolet; Bell Housing; High Performance; 11"; Aluminum; Standard Duty
Reproduction of the original '621' 11" bellhousing for various 1964-83 Chevrolet models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For big block or small block engines equipped with an 11" clutch....
1968-75 Camaro, 1968-76 Nova, 1970-75 Firebird; Transmission Kickdown Cable; Auto Trans; 6 Cyl.
OER® reproduction of the original transmission kickdown control cable designed for use with various 1968-77 Buick, Chevrolet, Pontiac, and Oldsmobile models with TH-350 automatic transmission with 6 cylinder. Each cable...
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1967-1979 GM; Torque Converter Cover; Turbo 350; For Starter Mounted on RH Driver Side
Reproduction torque converter cover (also called a flexplate/flywheel cover) for various 1967-79 GM vehicles with TH350 transmissions and a 153 tooth flex plate. Each cover is manufactured in injection molded ABS replicating...
1963-72 Powerglide Transmission Lower Kickdown Rod
The lower kickdown rod which was used on 1967-1972 Camaro models with factory installed V8 engines and Powerglide transmissions, is a commonly forgotten link in your vehicles drive train. This rod mounts between the...
Speedometer Cable and Casing; For Clip Retained on Speedometer Side; Push-On Style; 46" Long
Reproduction speedometer cable and casing for 1969-later GM models with clip-on style cable end at the speedometer end. Each cable is manufactured to exact OE specifications. Features correct fittings with clip on style...
1962-79 GM; Flywheel Clutch Housing Cover; for 10-1/2" Bellhousing; Manual Trans; OER
Correct flywheel / clutch cover plate designed for various 1962-79 GM models. Each cover is manufactured in quality stamped steel for an authentic replacement. This cover is located on the bellhousing and is used to cover the...
1964-79 GM; Transmission Dipstick; TH400 Auto Trans; 24-1/8" Long; Various Models
Reproduction of the original TH400 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with obsessive...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...
1958-75 Clutch Bellcrank Felt Seals ; Pair
OER® reproduction of the original die-cut felt seals that slips over the bellcrank pivot studs and seals against the end of the bellcrank tube to prevent dirt and water damage. Manufactured to correct dimensions. Sold in...
Powerglide Upper Kickdown Clip
OER® Authorized reproduction upper kickdown clip for models with powerglide automatic transmission. Connects the upper passing gear kickdown rod to the bellcrank assembly. Applications: 1967-69 Camaro with Powerglide...
1955-81 Retainer Clip; Trans Control Rod, Clutch Push Rod, Throttle Rod Swivel
OER® reproduction clip for a variety of different parts on 1955-81 GM vehicles. This clip was used to attach the throttle valve control rod, throttle lever rod swivel, and the upper and lower clutch push rods. Use as...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...