Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Features the correct recessed bottom. Fits models with a 3...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...
1969 Pontiac 4-Speed Shift Knob Insert
Reproduction domed polyurethane shift knob insert for the 4-speed shift knob on all 1969 Pontiac models except for Grand Prix. Features the shift pattern in silver over a red and black bullseye design with bright chrome...
1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst
Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...
1969-1971 Pontiac Firebird; GTO, LeMans; Shift Knob; Walnut Wood; Shift Pattern
Reproduction walnut Hurst Muncie shift knob with shift pattern for 1969-71 Pontiac Firebird, GTO and LeMans. This knob has 3/8" coarse threads and four speed shift pattern and has the correct walnut grain pattern. {specs}...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
1967-72 Small Block Clutch Fork Return Spring
OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 3-5/8" O.L. 2-1/2" spring portion. Applacations: 1967-69 Camaro small block 1967-69 Firebird...
1967-75 Return Spring Extension Rod
Correct reproduction of the original return spring extension rod designed for use on various GM models as listed. This rod is used in conjuntion with the clutch fork return spring. Together they connect the clutch fork to the...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1966-72 Pontiac, 1968-69 Firebird,1969 Camaro; Hurst Floor Shift Boot; 3 or 4 Speed; Manual Trans
Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...
1967-74 Upper Clutch Push Rod Boot - Various Models
This OER® reproduction of the original upper push rod molded rubber boot is manufactured using correct E.D.P.M. rubber compound stock that is superior to the original. Molded in steel insert distributes mounting screw...
1968-69 Camaro, Firebird, 1968-74 Chevy II, Nova; Clutch Linkage Kit; Big Block
Reproduction of the original components needed to replace the cluch linkage on 1968-69 Camaro big block models, 1968-74 Chevy II / Nova big block models and 1968-69 Firebird (V8) models. You'll be pleased with this all new...
Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models with 4 speed Hurst shifters. Works with original or reproduction Hurst shift boots. This...
1968-72 Frame Side Bellcrank Pivot Ball Bracket
OER® reproduction of the original frame side bellcrank pivot bacll beacket designed for use on various GM models. Each bracket is die-blanked and formed with the correct offset and holes for mounting. 1 bracket required...