1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1969 Camaro, Firebird, 1969-72 Nova Subframe Assembly; with TH400 Crossmember; OEM Style
Reproduction of the original complete subframe assembly designed for use with 1969 Camaro, 1969 Firebird, and 1969-1972 Nova models equipped with TH400 crossmembers. Rather than repairing a damaged or internally weakened...
1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1969 Pontiac Firebird; Front End Suspension Rebuild Kit; with Outer Tie Rod Ends Only
This complete front end suspension rebuild kit features a comprehensive assortment of components engineered to replace tired, deteriorated factory suspension parts. Designed to restore proper ride quality, steering response,...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1967-69 Camaro, Firebird; Rear Shock Upper Mounting Plate; Pair
One of the most commonly rusted, damaged, or accidentally discarded items in the rear suspension is the rear upper shock mount plate. This plate installs between the upper shock bushings and bolts to the factory weld nuts...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular lower control arms. Stronger and lighter than factory arms, these tubular replacements provide improved...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-1969 Camaro and Firebird models, as well as 1968-1979 Nova, 1971-1977 Ventura, 1973-1980 Omega, 1973-1975 Apollo, and 1975-1980 Skylark models equipped with multi...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
1967-81 Camaro, Firebird; Rear Shock Extension; Fine Thread; Pair
OER rear shock extenders for 1967-1981 Camaro and Firebird models. These extenders increase rear shock length by 2" and are specifically designed for use when converting from mono leaf springs to multi leaf springs. By...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
This reproduction disc brake spindle set is designed for a wide range of GM muscle car models, including 1967-1969 Camaro and Firebird, 1968-1974 Nova and other X body vehicles, as well as 1964-1972 Chevelle and additional A...
1968-69 Camaro, Firebird; Mono To Multi Leaf Conversion Hardware Kit; with 3-1/2"" U Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
1968-69 Camaro, Firebird; Mono To Multi Leaf Conversion Hardware Kit; with 3" U Bolts & T Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1967-69 Camaro, Firebird, Nova; Rear Axle Pinion Rubber Bumper, Each
OER reproduction rear axle pinion bumper for 1967 Camaro and Firebird (2nd design), 1968-1969 Camaro and Firebird models, and 1968-1969 Chevy II and Nova. Manufactured from high quality molded rubber, this bumper accurately...
1967-69 Camaro, Firebird; Rear Shock Reinforcement Plate
Reproductions of the original rear shock mount reinforcement plate for 1967-69 Camaro and Firebird models. This die stamped, heavy steel plate mounts to the trunk floor and has features two threaded holes.Comes with black EDP...
1968-69 Camaro, Firebird, 1968-79 Nova; Multi Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, preventing metal to metal contact that can lead to noise, vibration, and premature wear. These pads help maintain proper...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336
Reproduction rear stabilizer/swaybar bar link upper bracket for 1969-81 Chevrolet Camaro, Pontiac Firebird and 1969-1970 Chevrolet Nova models. This is the upper bracket that mounts the rear stabilizer/sway bar link to the...
1967-69 Camaro, Firebird; Plastic Shock Cap; 4 Piece Set
Correct reproduction of the original injection molded plastic shock absorber cap designed for use with 1967-1969 Camaro and Firebird models. This cap threads onto the top of the shock absorber to protect the exposed threads...
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Bolt Set; 6 Piece Set
Quality reproduction rear spring eye bracket bolts designed to mount the leaf spring front eye bracket. Each bolt is case hardened for exceptional durability, strength, and long lasting performance. An ideal replacement for...
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1958-88 Various GM Vehicles Chevelle, Skylark, Cutlass, GTO; Front Sway Bar; Heavy Duty Bracket; WS6
New reproduction of the OEM 1964-88 GM heavy duty front sway bar bracket for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models. See vehicle fitment fort all...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967-69 Camaro, Firebird; 1962-69 Chevy II Nova; Rear Leaf Spring Shackle; LH or RH; Each
This reproduction rear spring shackle is engineered for 1967-1969 Camaro and Firebird models and built to match the original in appearance, quality, and fit. Designed to OEM specifications, each shackle includes all required...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1967-81 Camaro Z/28, Firebird, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-1969 Camaro Z28 (302), 1968-1981 Firebird 400 and other performance models, as well as Chevy II, Nova, and various GM X body models originally...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
1969 Pontiac Firebird; Front End Suspension Rebuild Kit; with Inner & Outer Tie Rods
This complete front end suspension rebuild kit features a comprehensive assortment of components engineered to replace tired, deteriorated factory suspension parts. Designed to restore proper ride quality, steering response,...
1967-69 Camaro, Firebird, 1968-74 Nova; Upper Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular upper control arms. Stronger and lighter than the original factory arms, these performance oriented tubular...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
Replacement sway bar designed to reduce body roll, under steer, and over steer during cornering, resulting in improved vehicle handling, control, and driving confidence. Engineered to enhance stability without negatively...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are a critical component in maintaining proper vehicle control and overall suspension performance. Worn or deteriorated bushings can negatively affect handling, ride quality, and steering response,...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. Applications: 1973-74 Buick...
1967-81 Camaro, Firebird; Rear Shock Extensions; Coarse Thread; Pair
OER rear shock extenders for 1967-1981 Camaro and Firebird models. These extenders increase rear shock length by 2" and are specifically designed for use when converting from mono leaf springs to multi leaf springs. By...
1967-69 Camaro, Firebird; Shock Absorber Plastic Cap; Pair
Correct reproduction of the original injection molded plastic shock absorber cap designed for use with 1967-1969 Camaro and Firebird models. This cap threads onto the top of the shock absorber to protect the exposed threads...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-69 Camaro, Firebird, 1962-69 Chevy II Nova; Leaf Spring Shackle Bushing Set; 8 Piece Set
Reproduction of the original style leaf spring shackle bushings for use with 1967-69 Camaro, Firebird, and 1962-69 Chevy II and Nova models. Replace your cracked, shrunken or worn out shackle bushings and bring your rear...
1967-69 Camaro. Firebird; Coil Spring Front Upper Mounts; Pair
Reproduction front coil spring upper mounts for 1967-1969 Camaro, Firebird, and Trans Am models. Manufactured from high quality stamped steel to original factory specifications, these mounts restore proper front suspension...
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Mono Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, reducing metal to metal contact, vibration, and noise. These pads help protect the spring assembly, maintain proper suspension...
1967-74 Camaro, Firebird, Nova; Front Sway Bar Sleeve Brackets; Pair
Reproduction of the correct front sway bar sleeve brackets designed for use with various 1967-74 Chevrolet, Buick, Oldsmobile, and Pontiac models. These sleeve brackets mount on the front sway bar next to the sway bar bracket...
1967-81 Camaro, Firebird, Nova, GM X-Body; Spring Eye Bracket Nut Kit; 6 Piece Set; Various Models
Quality reproduction spring eye bracket nut kit to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting fastening when paired with the...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing WS6 for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 7/8" diameter...
New reproduction of the OEM 1958-88 GM heavy duty front sway bar/stabilizer bar bushing for multiple GM vehicles including Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass and Pontiac GTO models with 1-1/8" diameter...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
7/16"-20 Finished Nut; Grade 8; Domestic; Each
Nut 7/16"-20 Grade 8 Hi.625 Tall, 11/16 Hex Head. Hex nuts are six-sided, internally threaded fasteners, mated with bolts, studs, screws, and other externally threaded products. The addition of the hex nut ensures that the...