Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-69 Firebird; "Pontiac" Front Grill Emblem; with Hardware; GM Licensed; OER
Correct reproduction "Pontiac" grill emblem for 1967-69 Pontiac Firebird models. This emblem is manufactured in die-cast zinc replicating the original in design and appearance. Features correct white paint scheme in the...
1967-69 Pontiac Firebird; "P-O-N-T-I-A-C" Trunk Lid & Tail Panel Emblem; with Hardware; GM Licensed
Beautiful high quality OER reproduction of the trunk lid or rear panel emblem letters for 1967-69 Firebird models. Manufactured in quality zinc die-cast featuring chromed letters with correctly painted white accents. Correct...
1968-69 Firebird; Door Panel Emblem; Deluxe Interior; Bird Design
Reproduction of the original "Bird" interior door panel emblem originally installed on all 1968-69 Pontiac Firebird models with deluxe interior molded door panels. Each emblem is manufactured in zinc die-cast metal to factory...
1967-69 Pontiac Firebird;"428" Hood Emblem Set; with Hardware; Pair
High quality "428" hood lid emblem set for 1967-69 models that have undergone a 428ci engine transplant. While Pontiac never produced a factory made 428ci Firebird, many an enthusiast would argue that they should have, and...
1967-69 Pontiac Firebird; "455" Trunk Lid Emblem; Each
High quality "455" trunk lid emblem for 1967-69 models that have undergone a 455ci engine transplant. While Pontiac never produced a factory made 455ci Firebird, many an enthusiast have taken it upon themselves to perform the...
1964-72 GM; Rear End Positraction Tag; Red; 3/4"
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
1969-72 Pontiac; Horn Button Emblem; For Formula Steering Wheel Cap; Silver Arrowhead
Reproduction steering wheel emblem for 1969-72 Pontiac Formula steering wheel horn cap. Replace the missing emblem on your Pontiac with this quality reproduction or use this Pontiac Arrowhead horn cap emblem on a Firebird...
1964-81 GM; Rear End Positraction Tag; Red; 12 Bolt; 1" Tag
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
1969 Camaro / Firebird Standard Emblem Barrel Nut Kit
A complete kit that will allow you to install all emblems for the fenders, header panel, and trunk lid emblem. The barrel nuts are a push on style versus the original twist-on style, which will not require removal of body...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1967-69 Pontiac Firebird; "Firebird" Front Fender Emblem; with Hardware; Each; GM Licensed
Reproduction of the original "Firebird" front fender emblem designed for use on all 1967-68 Pontiac Firebird models. Will install on 1969 Firebird mopdels, but emblem is thicker than 1967-68 models. Manufactured in zinc...
1967-81 Chevrolet; "Cowl Induction" Hood Emblem Set; Pair
Reproduction of the original "Cowl Induction" hood emblem originally designed for use with 1970-72 Chevelle. El Camino and Monte Carlo models, but can be used on Camaro hoods as well. Manufactured in quality die-cast zinc...
1969-70 Camaro, Impala, Chevelle; Dash "Astro Ventilation" Emblem; OER
This quality OER® reproduction of the original Astro Ventilation emblem is designed for use with 1969-70 GM vehicles which were equipped with the Astro Ventilation option. Manufactured in zinc die-cast metal, each emblem...
1967-69 Pontiac Firebird;"400" Hood Emblem Set; with Hardware; Pair; GM Licensed
Reproduction of the original "400" hood emblem designed for use on 1967-69 Pontiac Firebird models. Manufactured in chrome plated zinc die-cast metal featuring red painted numbers. Includes speed nuts for...
1968-69 Pontiac Firebird;"350" Hood Emblem Set; with Hardware; Pair; GM Licensed
Reproduction of the original "350" hood emblem designed for use on 1968-69 Pontiac Firebird models. Manufactured in chrome plated zinc die-cast metal featuring red painted numbers with black accents. Mounting hardware...
1967-77 Pontiac Firebird, Trans Am; "400" Checkered Flag Front Fender Emblems; Pair
Checkered flag front fender emblems with 400 engine size designation can be used with various Pontiac models including 1967-77 Firebird and Trans Am models. These emblems are manufactured in die-cast zinc and feature the...
1967-69 Pontiac Firebird; "455" Hood Emblem Set; with Hardware; Pair; GM Licensed
Reproduction "455" hood emblem designed for use on 1967-69 Pontiac Firebird models. Manufactured in chrome plated zinc die-cast metal featuring red painted numbers with black accents. Mounting hardware included. Sold in...
1968-69 Pontiac Firebird "Sprint" Rocker Panel Emblem Set; Pair
Reproduction "Sprint" nameplate rocker panel emblem set for 1968-69 Pontiac Firebird Sprint models. Each emblem set is manufactured in die-cast zinc featuring correct color lettering with a black base finish. Requires four...
"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"
This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".
1969 Pontiac Firebird, Trans Am; Ram Air Decal
Reproduction of the original "Ram Air" decal for use with 1969 Firebird and Trans Am models. This decal is located under the dash and mounts to the inner cable support bracket. Authentic reproduction of the original decal.
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1969 Pontiac Firebird; Trunk Lock Bezel; with Hardware; GM Licensed
Add the finishing touch to your 1969 Firebird restoration with this quality reproduction trunk lock bezel. Features two studs and includes the 10-24 fastening nuts for mounting. Each die-cast bezel is polished to perfection,...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1967-69 Pontiac Firebird; "400" Rear Trunk Lid Emblem; with Hardware; GM Licensed
Quality reproduction of the original "400" trunk lid emblem designed for use with 1967-69 Firebird models. Each emblem is manufactured in die-cast zinc replicating the original in fitment and appearance. Features correct red...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1967-68 Firebird; Front Nose Bumper Arrowhead Emblem; with 400 Engine; with Hardware; GM Licensed
OER® reproduction of the original Arrowhead front bumper emblem designed for use on 1967-68 Pontiac Firebird 400 models. Each emblem is manufactured to replicate the original in quality and appearance. This version is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
1968-69 GM; Seat Belt Buckle Emblem; Standard Interior; Blue; Starburst; Pair
Replacement style seat belt buckle self adhesive decal for 1968-69 GM models with standard interior. Designed with OER's exclusive and unique "Starburst" design, each decal comes in a color scheme that is reminiscent of the...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
1968-69 GM; Starburst Seat Belt Buckle Emblem Set; Deluxe Interior; Pair; Silver-on-Black
Replacement style seat belt buckle self adhesive decal for 1968-69 GM models with deluxe interior. Designed with OER's exclusive and unique "Starburst" design, each decal comes in a color scheme that is reminiscent of the...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
1968-69 GM; Seat Belt Buckle Emblem; Standard Interior; Black; Starburst; Pair
Replacement style seat belt buckle self adhesive decal for 1968-69 GM models with standard interior. Designed with OER's exclusive and unique "Starburst" design, each decal comes in a color scheme that is reminiscent of the...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...