Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1968-70 Mopar B-Body (Except Charger); Glass Set; Clear; Hardtop
This comprehensive glass set for 1968-70 Dodge and Plymouth 2 door hardtop models (except Dodge Charger) features CLEAR (untinted) glass without date coding or original markings. Set includes: Windshield LH and RH Vent Glass...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Tinted Glass; Crush Vinyl; Black
Reproduction convertible glass rear window, manufactured using high quality heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques assure that you receive...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
1966-67 Mopar B-Body; Sedan/Wagon; Windshield; Tinted With Shade
This replacement windshield is tempered laminate safety glass, designed to protect passengers from road debris. Available tinted. Each glass is professionally packed with extra care to prevent damage during shipping. Features...
1966-84 Wiper Blade; 16" Anco Style; 1/4" Bayonet Connector; Polished Stainless; Each
Reproduction 16" wiper blade assembly manufactured to factory specifications, featuring a bright polished stainless steel finish and premium wiper insert. Fits 1/4" bayonet end wiper arms. Sold individually. Product...
1967-70 Dodge, Plymouth B-Body; Convertible Top; Crush; Black
Replacing your convertible top is an expensive proposition that should be done once and done right. OER® ; understands what a demanding job it is, that's why we stock the highest quality convertible tops available! Each...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1966-74 Dodge/Plymouth A & B-Body; Exterior Door Mirror; Round Head; With Remote; LH Driver Side
Freshen the look of your Dodge or Plymouth by replacing your pitted, damaged or missing mirror with this brand new replacement remote outer door mirror for 1966-74 A-body models with a vent window or 1966-70 B-body models...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Reproduction of the original back glass designed for use with 1968-70 Dodge Coronet, Plymouth Belvedere, Road Runner, Satellite, GTX, and Super Bird models. Manufactured with the proper shape, curvature, and pattern in OEM...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1967-70 Dodge, Plymouth B-Body; Convertible Rear Window; Plastic Curtain; Crush Grain; White
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Crush Grain vinyl materials to ensure longevity and durability. Original manufacturing techniques...
1967-74 Dodge, Plymouth; A, B-Body; Outer Door Mirror; Single Post; with Hardware; RH or LH; Each
Reproduction of the original outer single post door mirror for 1967-74 Dodge and Plymouth A-Body or 1968-70 Dodge and Plymouth B-Body models. Each outer door mirror is manufactured in die-cast zinc featuring a bright chrome...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction outer door handles for various 1967-70 Dodge and Plymouth models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished chrome finish replicating the original in design,...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
OER reproduction of the original front windshield glass for various 1966-67 Dodge and 1966-70 Plymouth B-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the standard for...
OER reproduction of the original front windshield glass for use with 1968-70 Dodge and Plymouth B-Body 2 door, hardtop and sedan models. This windshield is manufactured with tempered laminate safety glass that meets the...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1965-74 Chrysler, Dodge, Plymouth; Windshield Washer Pump; Replacement
Replacement style windshield washer pump assembly designed for use with the applications listed below. The windshield washer pump circulates water from the windshield washer jar to the washer nozzles. This is a replacement...
1966-70 Chrysler, Plymouth, Dodge A, B, C-Body; Convertible Top Hydraulic Cylinder; Each
Reproduction of the original convertible top cylinder designed for use with 1966-70 Chrysler, Dodge and Plymouth A, B, and C Body convertible models as listed. All convertible top cylinders are not the same. This convertible...
1967-70 Dodge, Plymouth A, B-Body; Front Outer Door Handle Set; with Black Buttons
Reproduction of the original outer door handles designed for use with various 1967-1970 Dodge and Plymouth A, B Body models as listed below. Each door handle is manufactured in quality die-cast zinc featuring a polished...
1968-70 Dodge, Plymouth B-Body; Door Window Glass; 2 door Hardtop; Tinted; RH Passenger Side
Reproduction door glass for 1968-70 Dodge and Plymouth B-Body models. Each door glass is manufactured in tempered safety glass matching the original Mopar design. Glass is produced without date coding or original style...
This OER™ door glass designed for use with 1968-70 Dodge and Plymouth B-Body 2 door hardtop models as listed below. Each door glass is manufactured in tempered safety glass matching the original Mopar design. Glass is...
1969-70 Plymouth B-Body Convertible Door Glass; Tinted RH
This OER™ door glass is made of tempered safety glass and is produced without date coding or original style markings. Note: Pictured for illustration purposes only. Actual shape may differ from picture. All glass is...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1968-70 Charger, Coronet, Road Runner, GTX; Windshield Wiper Arms; 2-Door Hardtop, Coupe; Pair
Reproduction of the windshield wiper arms designed for use with 1968-70 Dodge and Plymouth B Body models. Each wiper arm is manufactured from stamped and formed stainless steel with a die-cast base to fit a 5/8" diameter...
1966-74 Dodge, Plymouth; Lower Front Door Hinge; LH; Driver Side; Various Models
Reproduction door hinge for various Dodge and Plymouth A and B-Body models. The front doors on 1966-74 Mopar A and B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to...
1968-70 Dodge, Plymouth; Door Striker Plates; with Screws
Reproduction door striker plates originally installed on 1968-70 Dodge and Plymouth B-Body models. Each plate is manufactured in stamped steel and zinc coated for long lasting dependability. {specs} {fitment}
1966-67 Mopar B-Body Convertible; Replacement Quarter Glass; Tinted; RH
Replace your pitted, scratched or broken original quarter window glass with this new DOT (department of transportation) certified replacement tempered safety glass. This replacement quarter glass is made of tempered safety...
1966-70 Mopar B-Body Convertible; Replacement Quarter Glass; Clear; LH
Replace your pitted, scratched or broken original quarter window glass with this new DOT (department of transportation) certified replacement tempered safety glass. This replacement quarter glass is made of tempered safety...
1968-70 Dodge, Plymouth B-Body; Quarter Window Glass; 2-Door Hardtop; Tinted; RH Passenger Side
OER reproduction of the original rear quarter window glass for use with 1968-70 Dodge and Plymouth B Body models as listed. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit...
1968-70 Dodge, Plymouth B-Body; Quarter Window Glass; 2-Door Hardtop; Clear; LH Driver Side
OER reproduction of the original rear quarter window glass for use with 1968-70 Dodge and Plymouth B Body models as listed. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit...
1968-70 Dodge, Plymouth B-Body; Quarter Window Glass; 2-Door Hardtop; Clear; RH Passenger Side
OER reproduction of the original rear quarter window glass for use with 1968-70 Dodge and Plymouth B Body models as listed. Each door glass is molded in tempered glass with the correct shape and curvature for a precise fit...
1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; LH; Drivers Side
Reproduction door hinge for various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to factory...
1966-70 Dodge, Plymouth B Body; Upper Front Door Hinge; RH; Passenger Side
Reproduction door hinge for various Dodge and Plymouth B-Body models. The front doors on 1966-70 Mopar B-Body models were extremely heavy and hard on the original door hinges. Each door hinge is reproduced to factory...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1968-71 Dodge; Plymouth; Chrysler; Windshield Wiper Motor; 2-Speed; Brand New
New windshield wiper motor for various 1968-71 Mopar models. Brand new tooling for a crisp and clean look. Meticulously engiineered as an improvement over the original design. The motor gears are designed with a stronger,...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1967-70 Mopar B-Body Black Windshield Washer "F" Connector
Keep your windshield washer system in working order and maintain visibility on the highway by replacing your damaged or missing original fitting with this new factory-style replacement. Mopar Authentic Restorat ion™...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
Reproduction of the original door vent glass for use with 1966-70 Dodge and Plymouth B=Body models as listed. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while...
Reproduction of the original door vent glass for use with 1966-70 Dodge and Plymouth B=Body models as listed. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while...
Reproduction of the original door vent glass for use with 1966-70 Dodge and Plymouth B=Body models as listed. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1968-70 Dodge, Plymouth B-Body; Door Vent Glass; 2 Door Hardtop, Sedan; Tinted; RH Passenger Side
Reproduction of the original door vent glass for use with 1968-70 Dodge and Plymouth B=Body models as listed. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while...
Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
1968-70 Dodge, Plymouth B-Body; Door Vent Glass; 2 Door Hardtop, Sedan; Clear; RH Passenger Side
Reproduction of the original door vent glass for use with 1968-70 Dodge and Plymouth B=Body models as listed. Replacing your original glass will eliminate any scratches, chips, or cracks the original glass may have while...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....