Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1969-70 Mustang, Cougar; Fender Apron and Shock Tower Assembly; Drivers Side; EDP Coated
1969-70 Mustang and Cougar full shock tower assembly with 1-piece inner fender apron, shock tower and frame rail welded together. Fender aprons feature correct holes to accept the fender nuts and is a one-piece style to...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction convertible rear tack strip that mounts under the rear panel behind the window. This strip holds the convertible top, rear window and well liner to the body. Manufactured from factory grade metal, each strip...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1966-70 Mustang, Cougar; Windshield Wiper Arm; Flanged End Cap; LH or RH; Polished Finish
Reproduction of the original windshield wiper arm for use with 1966-70 Mustang and 1967-70 Cougar models. Manufactured to factory specifications in stainless steel, featuring the correct shape and finish for proper fitment...
1969-70 Mustang, Cougar; Front Windshield Glass; Tinted with Shaded Band; Coupe, Convertible
OER reproduction of the original windshield glass for use with 1969-70 Mustang coupe and convertible models. Glass is manufactured to original factory specifications replicating the original configuration for an authentic...
1969-70 Mustang, Cougar; Door Glass; Tinted; Coupe, Convertible; Bolt-In Style; Drivers Side
Reproduction of the original door glass designed for use with 1969-70 Mustang and Cougar coupe and convertible models. Each door glass is manufactured to factory specifications featuring correct glass shape and contours for...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1969 Mustang/Cougar; Coupe/Convertible; Door Glass; Glue-In Style; Smoke Gray; RH
Reproduction door glass for early 1969 Mustang and Cougar models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance. Ford Applications: 1969 Mustang...
1969 Mustang/Cougar; Coupe/Convertible; Door Glass; Glue-In Style; Smoke Gray; LH
Reproduction door glass for early 1969 Mustang and Cougar models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance. Replaces NAGS # DD04122 YTN. Ford...
1969-70 Mustang/Cougar; After 10/69; Coupe/Convertible; Door Glass; Bolt-In Style RH; Smoke Gray
Reproduction door glass for 1969-70 Mustang and Cougar models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance. Replaces NAGS # DD04282. Ford Applications:...
1969 Mustang, Cougar; Door Glass; Tinted; Coupe, Convertible; Glue-In Style; Passenger Side
Reproduction of the original door glass designed for use with 1969 Mustang and Cougar coupe and convertible models. Each door glass is manufactured to factory specifications featuring correct glass shape and contours for...
1969 Mustang, Cougar; Door Glass; Clear; Coupe, Convertible; Glue-In Style; Passenger Side
Reproduction of the original door glass designed for use with 1969 Mustang and Cougar coupe and convertible models. Each door glass is manufactured to factory specifications featuring correct glass shape and contours for...
1967-70 Mustang, Cougar; Hood Hinge; Driver Side; EDP Coated
Reproduction hood hinge for 1967-70 Mustang and Cougar models. Each hinge is manufactured in stamped steel replicating the original in design and fitment. Produced with quality materials and correct mounting locations. Comes...
1967-70 Mustang; Hood Hinge; Passenger Side; EDP Coated
Reproduction hood hinge for 1967-70 Mustang and Cougar models. Each hinge is manufactured in stamped steel replicating the original in design and fitment. Produced with quality materials and correct mounting locations....
1969 Mustang, Cougar; Door Window Regulator; Drivers Side
Reproduction of the original window regulator designed for use with 1969 Ford Mustang and Mercury Cougar models. Produced in quality stamped steel and cadmium plated for corrosion resistance, each regulator is engineered for...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1969 Mustang/Cougar; Quarter Window Glass; Smoke Gray Tint; LH
Reproduction quarter glass for 1969 Mustang (Coupe/Convertible) and 1969 Cougar (Convertible Only) models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance....
1969 Mustang/Cougar; Quarter Window Glass; Smoke Gray Tint; RH
Reproduction quarter glass for 1969 Mustang (Coupe/Convertible) and 1969 Cougar (Convertible Only) models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance....
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
1969-70 Mustang, Cougar; Door Latch Assembly; Drivers Side; Various Ford Models
Reproduction door latch assembly for various 1968-1972 Ford and Mercury models including Mustang, Cougar, Falcon, Comet, Maverick, Torino, Galaxie and more. This latch is constructed of high-quality metal and will attach to...
1969-70 Mercury Cougar Coupe Heavy Weight Molded Trunk Mat - Plaid
This trunk mat is a high quality molded reproduction of the heavy weight trunk mat originally installed in your 1969-70 Cougar. Fits and looks great with no seams! Installation is simple - the extra weight of the mat keeps it...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1969-70 Mustang, Cougar; Door Latch Assembly; Passenger Side; Various Ford Models
Reproduction door latch assembly for various 1968-1972 Ford and Mercury models including Mustang, Cougar, Falcon, Comet, Maverick, Torino, Galaxie and more. This latch is constructed of high-quality metal and will attach to...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1969-70 Mustang, Cougar; Upper Door Hinge; LH Drivers Side
Reproduction of the upper door hinge designed to replace the worn out or damaged original for 1969-70 Mustang and Cougar models. After years of continuous use, your doors can begin to have problems associated with sagging....
1969-70 Mustang, Cougar; Lower Door Hinge; RH Passenger Side
Reproduction of the lower door hinge designed to replace the worn out or damaged original on 1969-70 Mustang and Cougar models. After years of continuous use, your doors can begin to have problems associated with sagging....
1969-70 Mustang, Cougar; Quarter Window Regulator; Passenger Side
Reproduction of the original style quarter window regulator designed for use with 1969-70 Mustang and Cougar models. Each regulator is produced in stamped steel to OE specifications ensuring a quality fitment and appearance....
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1969 Mustang, Cougar; Quarter Window Glass; Green Tint; Coupe, Convertible; Passenger Side
Reproduction of the original rear quarter glass designed for use with 1969 Mustang coupe, convertible, and 1969 Cougar convertible models. Each quarter window glass is manufactured to factory specifications featuring correct...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1967-73 Mustang/Cougar; Convertible; Top Latch Hooks
The convertible top latch hooks mount to the latch assembly to securely hold the convertible top to the windshield frame. Produced from forged steel and finished in bright chrome plating for durability, longevity and an...
1969-70 Mustang/Cougar Convertible Top Side Cables
Reproduction convertible top side cables for 1969-70 Mustang and Cougar models equipped with a convertible top. These cables mount to the side frame rails and keep the top fabric in place. Sold in pairs. Replaces Ford part #...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide
Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
Bolt, 1/4-20 x 1-3/16" Dog Point Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 5/16-18 x 1" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 5/16-18 X 7/8" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
U-Type Clip Nut, Fits #8 Screw, Black Phosphate Coated
Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Zinc
This phillips head tapping screw is zinc plated steel to prevent corrosion and has a pan head. It's a size #8 x 1". Screw Size : #8 Length : 1" Head Style : Phillips pan Point Type : A/AB Finish : Zinc Applications: 1972-73...
1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated
1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated