Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1966-69 Ford Fairlane, Torino 2-Door Fastback Models; Fuel Tank; 20 Gallon; 6-3/4" Filler Neck
OER Authorized galvanized (zinc coated) reproduction stamped steel fuel tank offers a precise fit and features a standard corrosion resistant coating for protection against rust. Includes lock ring and o-ring gasket for the...
1961-72 Ford F100, F250 Truck; In-Cab Fuel Tank; without EEC; Zinc Coating; 19.5 Gallon
Reproduction in-cab gas tank for 1961-72 Ford F100, F250 Pickup Trucks without EEC. This direct replacement steel tank installs in the stock location, behind the seat, using the original hardware. Tank measures approximately...
1969 Ford Mustang; Niterne Gas Tank Kit; With 3/8" Fuel Sending Unit; With Drain Plug
OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...
Reproduction side mount gas tank for 1969-78 Ford F-100, F-150, F-250, F-350 Pickup Trucks without EEC. This direct replacement steel tank installs in the stock location using the original hardware. Tank measures 60 in. x 14...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1969 Mustang, Cougar; Zinc Coated Fuel Tank; 20 Gallon; with Drain Plug; F28C
OER Authorized reproduction fuel tank for 1969 Mustang, and Cougar models. Each fuel tank is manufactured in quality stamped steel offering a precise fit. Features a Zinc coating for protection against rust and corrosion....
1969 Mustang, Cougar; Accelerator Pedal Assembly
Reproduction of the original accelerator assembly designed for use with 1969 Ford Mustang and Mercury Cougar models. Extends from the firewall and comes with the accelerator pedal, pedal mount pin and spring, accelerator rod,...
1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models
Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...
1969 Mustang, Cougar; Fuel Tank Sending Unit; with Low Fuel Warning; Stainless Steel; 3/8" Outlet
Replacement fuel level sending unit for 1969 Mustang and Cougar models with low fuel warning systems. Features the original design including a filter, O-ring, and brass float that replicate the original in appearance and...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1966-71 Fairlane Station Wagon, Torino Station Wagon; Fuel Tank Sending Unit; 3/8" Line
Reproduction fuel level sending unit for various Fairlane and Torino wagon models. This direct fit replacement features a brass float, locking ring, and O-ring. Replaces Ford Part # C6OZ-9275-D, or D0OZ-9275-J. Fitment...
1946-02 GM; Various Models; Throttle Cable; 36""; Stainless Steel ; Cut-To-Fit
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Reproduction fuel level sending unit for 1966-69 Ford Fairlane, 1968-69 Torino and 1966-69 Mercury Comet models with 3/8" inlet. This direct fit replacement includes the NBR float, locking ring, and O-ring. Does NOT fit...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
1966-96 Ford, Mercury; Lower Fuel Tank Filler Pipe Seal; Various Models
Reproduction of the original fuel tank to filler pipe seal designed for use on various1966-97 Ford and Mercury applications. Each seal is manufactured to correct factory specifications and replaces the old or missing original...
1967-72 Ford F100, F250, F350 Pickup Truck; Fuel Tank Filler Neck; Black
Reproduction fuel tank filler neck for 1967-1972 Ford F100, F250, F350 pickup truck models. Each filler neck is manufactured in quality stamped steel featuring zinc plating with black EDP coating for premium rust and...
1966-76 Ford Bronco; Rear Main Fuel Tank Mounting Strap; Each
Reproduction of the original style side mount gas tank strap designed for use with 1966-1976 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1966-69 Ford; Filler Neck-to-Body Sealing Gasket
Gas tank filler neck-to-body sealing gasket. Made of rubber, this gasket sits behing the filler neck flange to cushion the fuel filler where it mounts to the body of the car. Fits various 1966-69 Fairlane, Falcon, and...
1968-79 Ford ; Accelerator Pedal Trim; Stainless Steel; Various Models
Reproduction accelerator pedal pad trim manufactured to exact factory specifications featuring configuration and bright polished stainless steel finish. For various 1968-71 Ford car models and 1973-79 Ford truck models as...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
1964-72 Ford Truck; Fuel Tank Insulation; 2-Piece Set
Reproduction rubber fuel tank insulator set for 1964-72 Ford truck with cab mount fuel tank behind the seat. Dense die cut rubber material features adhesive on one side for convenient installation on tank. Helps to eliminate...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
Correct reproduction of the original fuel tank designed for with 1969 Ford Mustang, and 1969 Mercury Cougar models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering...
1966-70 Ford Falcon; Fuel Tank; Zinc Plated; 16 Gallon
OER Authorized galvanized (zinc coated) reproduction stamped steel fuel tank offers a precise fit and features a standard corrosion resistant coating for protection against rust. Includes drain plug, lock ring and o-ring...
1966-69 Ford Fairlane, Torino 2-Door Hardtop, Convertible, Sedan Models; Fuel Tank; 20 Gallon
OER Authorized galvanized (zinc coated) reproduction stamped steel fuel tank offers a precise fit and features a standard corrosion resistant coating for protection against rust. Includes lock ring and o-ring gasket for the...
Reproduction fuel tank for various 1966-1970 Ford and Mercury full size models as listed. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion...
OER Authorized reproduction of the original style fuel tank designed for use with 1969 Ford Mustang, and 1969 Mercury Cougar models. Each fuel tank is manufactured in quality stamped steel featuring a Niterne coating for...
1966-77 Ford Bronco; Main Fuel Tank; 14-1/2 Gallon Tank
Reproduction main gas tank for 1966-77 Ford Bronco models. Each gas tank is manufactured to original factory specifications replicating the original in design, appearance and fitment. This direct replacement steel tank...
1966-76 Ford Bronco; Gas Tank Pipe Filler Guard Set
Reproduction gas tank filler pipe guard set for 1966-76 Ford Bronco. These panels install in the driver side inner quarter area and cover the filler pipe that extend through the bedfloor and out the quarter panel. They are...
1967-70 Ford Mustang; Rubber Filler Neck Hose; Fuel Tank to Filler Pipe; 4-7/8" Long; 2-3/16" id
Reproduction fuel filler hose that seals the inlet filler neck to the fuel tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1965-73 Ford Mustang; Screw Set; Gas Tank Mounting; 13 Piece Set
This 13 piece set contains all the mounting hardware needed to install your gas fuel tank. Each piece is factory correct. Screws and bolts are all fabricated from heavy-duty steel and coated to prevent any corrosion. Ford...
1964-70 Ford/Mercury; Wire Clamps; For Fuel Filler Neck Hose
Reproduction wire-style fuel tank filler neck clamps for 1964-70 Mustang, 1967-70 Cougar and 1966-70 Fairlane models. If your hose is loose, the filler neck clamps could be worn out and require replacing. These clamps are...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part # C5ZZ-9735-D. Ford...
1969 Mustang, Cougar; Fuel Tank Sending Unit; without Low Fuel Warning; 3/8" Inlet
Reproduction of the most accurate reproduction fuel tank sending unit in the industry. Features the original design including a filter, O-ring, and brass float that replicate the original in appearance and functionality. This...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
1968-70 Ford Galaxie, Custom, LTD; Fuel Tank Filler Neck Pipe
Reproduction fuel filler neck pipe for 1968-70 Ford Galaxie and full size passenger car models. Connects with a fuel filler hose (sold separately) to the fuel tank. Replacing the filler neck is recommended whenever you...
1966-76 Ford Bronco; Fuel Tank Filler Pipe; For Auxiliary (side) Tank
Reproduction of the front auxiliary fuel tank filler pipe for 1966-76 Ford Bronco models. Replacing the filler neck is recommended whenever you replace your gas tank. This is where the gas cap attaches. After years of use and...
1966-76 Ford Bronco; Fuel Tank Sending Unit; Auxiliary Tank 3/8"; with Lock Ring and Seal
Reproduction of the original auxiliary gas tank fuel tank sending unit designed for use with 1966-76 Ford Bronco models. This sending unit installs in the forward fuel tanks. Includes lock ring, O-ring seal, and strainer....
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1966-69 Fairlane, Torino, Comet; Fuel Tank Sending Unit; 5/16" Fitting; except Sation Wagon
Reproduction fuel level sending unit for 1966-69 Ford Fairlane, 1968-69 Torino and 1966-69 Mercury Comet models with 5/16" inlet. This direct fit replacement includes the NBR float, locking ring, and O-ring. Replaces Ford...
1966-1977 Ford Bronco; Auxiliary Fuel Tank Mounting Straps; Pair
Reproduction of the original style rear mount gas tank straps designed for use with 1966-1977 Ford Bronco models. Each strap is manufafactured in stamped steel to correct factory dimensions. Comes with a black EDP coating for...
1964-69 Ford Mustang; Hex Head Screw Set; For Fuel Filler Neck; 5 Piece Set
Reproduction fuel filler neck screw kit. Each 5 piece screw kit includes the hex head screws that are required to mount the fuel filler neck to the tail lamp panel on 1964-69 Mustang models. #10 x 1/2" Lg Tapping Screw with...
1966-76 Ford Bronco; Fuel Sending Unit; Rear Main Tank 3/8"; with Lock Ring & Seal
Reproduction of the original main fuel tank fuel level sending unit designed for use with 1966-76 Ford Bronco models. This sender installs in the rear main tank and will work with either stock steel or replacement poly fuel...
1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models
Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...
1969 Mustang; Fuel Tank Filler Pipe Assembly
Reproduction filler pipe for 1969 Mustang. Each fuel tank filler neck is manufactured to OE specifications replicating the original in quality, design, and fitment. will mount to your Mustang tail light panel and connects the...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
1968-79 Ford Car & Truck; Accelerator Pedal Pad; Various Models
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, and grip pattern. For various 1968-71 Ford car models and 1973-79 Ford truck models as listed. Replaces Ford part #...
1965-72 Ford F-100, F-250 Truck; 2WD, 4WD; In-Cab Fuel Tank Mounting Plates
Reproduction fuel tank bracket set for various 1961-72 Ford F-Series Pickup Truck models with in-cab fuel tanks. These brackets attach to the cab floor and prevents forward and backward movement of the fuel tank. Fitment...
1966-1977 Ford Bronco; Fuel Tank J-Bolt Set; Each
Reproduction fuel tank J-Bolt with two nuts and a lock washer for 1966-1977 Ford Bronco models. Each j-bolt is manufafactured in stamped steel and chrome plated to correct factory dimensions. Sold individually.
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...