1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1967-75 Dart / Valiant Door Edge Guards - Pair
Reproduction of the original door edge guards designed for use on all 1967-75 Dodge Dart and Plymouth Valiant 2 door models. Each guard is manufactured to exact specifications. Will fit and install on the door as original,...
1967-76 Dodge Dart; Wheel Opening Molding; Front; LH Drivers Side
Reproduction of the original wheel opening moldings designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1967-76 Dart, Scamp Valiant A-Body; Rear Wheel Opening Molding; with Hardware; RH Passenger Side
Reproduction of the original wheel opening molding designed for use on various 1967-76 Dodge, and 1971-76 Plymouth A-Body models as listed. Each molding is manufactured in stamped aluminum to original factory contours...
1967-76 Dart, Scamp Valiant A-Body; Rear Wheel Opening Molding; with Hardware; LH Driver Side
Reproduction of the original wheel opening molding designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
Premier reproduction rear window molding clip set for various Mopar models. Each clip set will replace the rusted or damaged originals exactly. These clips will attach the rear window glass molding to the body. 22 piece clip...
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
1970-76 Dodge, Plymouth A-Body; Rear Window Molding Clip Set; 12-Piece Set
OER Premier reproduction rear window molding clip set for 1970-76 Dodge and Plymouth A-body models. Each clip will replace the rusted or damaged original. These clips will attach the rear window molding to the body. Clips...
1969 Dodge Dart Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1968-76 Chrysler, Plymouth, Dodge; Window Molding Clip; 2-Door Hardtop; Individual Clip
Reproduction window molding clip for a wide range of A, B, and C-Body Chrysler, Plymouth, Dodge models including 1968-76 Dart and Valiant hardtop models. Each clip will replace the rusted or damaged originals exactly. These...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1969 Dodge Dart; GTS; Rear Trunk Lid Panel Molding
Reproduction of the rear finish panel molding designed for the trunk of 1969 Dodge Dart GTS models. Each panel is manufactured in stamped aluminum, anodized and polished to perfection offering an authentic appearance and fit....
1967-76 Dodge Dart; Wheel Opening Molding Set; Front and Rear; 4 Piece Set; Made In USA
American made reproduction of the original style wheel opening moldings designed for use with 1967-76 Dodge Dart models. Each molding is manufactured in quality stamped aluminum featuring correct contours for an authentic...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1967-76 Dodge A-Body; Wheel Opening Molding Set; 4 Piece Set
Factory-style reproduction of the original wheel opening moldings designed for use with 1967-76 Dodge A-Body models. Each wheel opening molding is precision stamped to fit the vehicles contours exactly, and features the...
1967-69 Dodge Dart Hood Lip Molding Set ; 3 Piece Set
Reproduction of the original hood lip moldings designed for use on 1967-69 Dodge Dart models. Replace the dented or long-gone hood lip moldings with this premium replacement hood lip molding set. Manufactured to exact factory...
1967-69 Dart Rocker Panel Moldings
Factory-style replacement rocker panel moldings for 1967-69 Dodge Dart models. These moldings attach directly to the rocker panel below the door, extending from the front wheel well to the rear wheel well. Made in USA. Sold...
1967-76 Dodge Dart; Wheel Opening Molding ; Front ; RH Passenger Side
Reproduction of the original wheel opening moldings designed for use on 1967-76 Dodge A-Body models. Each molding is manufactured in stamped aluminum to original factory contours replicating the original in fitment and...
1970-71 Dodge Challenger; 1967-69 Dart; Hood Lip Molding Hardware Set
Factory-style replacement hood lip molding installation hardware for1967-69 Dart, and 1970-71 Dodge Challenger models. Each molding hardware includes proper retainers with 1/2 threaded stud and nuts to correctly secure your...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1968-76 Dodge Dart, Plymouth Scamp; Front Windshield Molding Clip Set; 23 Piece Set
Reproduction of the factory-style replacement front windshield molding clips designed for use on 1968-76 A-Body models. Each clip will replace the rusted or damaged original. These clips will attach the windshield molding to...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
Reproduction windshield and rear window molding clip for various 1968-76 Dodge and Plymouth A-body hardtop and sport coupe models. Each clip will replace the rusted or damaged original to attach the rear window molding to the...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Factory-style reproduction windshield molding upper and side clip for 1968-70 Dodge Charger, Coronet, Super Bee, and Plymouth Road Runner, Satellite, and GTX models and rear window clip for 1968-69 Plymouth Barracuda. Each...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1968-69 Dart Grill Support Bracket - All Models - LH
OER reproduction of the LH reinforcement support bracket for the grill assembly on all 1968-69 Dodge Dart models. This steel bracket attaches to the LH inner grill bracket just below the park lamp assembly to strengthen and...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set
Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...
Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated, 10 piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 5/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...