Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-68 Camaro, 1968-69 Nova; SS Front Grill Emblem; GM Licensed
Reproduction of the original SS front grill emblem designed to fit a variety of Chevrolet vehicles including 1967-68 Camaro and Nova models. Manufactured in zinc die-cast metal replicating the original in fitment and...
1969-72 Nova; Bowtie Hood Lip Emblem; GM Licensed
Reproduction of the original Bow Tie hood lip emblem designed for use on 1969-72 Chevrolet Nova models. Each emblem is manufactured in die-cast zinc with an injection molded blue Bow Tie emblem in the center replicating the...
1969 Chevrolet Nova; Complete Yenko Stripe Set
This correct reproduction of the stripe set Yenko Chevrolet used on their special order, high performance 1969 Yenko Nova cars. This high quality stripe set contains all the applicable decals to bring your "Yenko" to life....
1969-72 Nova; Door Panel Emblems; with Custom Interior ; Pair; GM Licensed
Reproduction of the original "Nova" door panel emblems found on all 1969-72 Chevrolet Nova models with a factory custom interior. Each emblem is manufactured in die-cast zinc to exact factory specifications and features a...
1968 Impala, Caprice, Chevelle, Bel Air, Nova; SS 427 Front Side Marker Bezels; RH & LH; Pair
Reproduction of the original SS 427 front fender side marker bezels designed use with 1968 Chevrolet Impala, Bel Air, Biscayne, Caprice, Nova, Chevelle, and El Camino models. Each bezel is manufactured in quality die-cast...
1968 Impala, Bel Air, Caprice, Nova; SS-502 Front Side Marker Bezel; RH and LH; Pair
Aftermark style reproduction that features a retro looking front side market bezels for modified vehicles with 502 engines. Has the same design as the 1968 style side marker bezel, but features the "SS-502" engine...
1969 Camaro, Impala, Nova; SS Steering Shroud Emblem
Superb reproduction of the original "Super Sport" steering shroud emblem designed for use on all 1969 Camaro models equipped with the SS (Super Sport) option. This premium emblem is manufactured from zinc die-cast metal and...
1968-69 Nova SS; Rear Panel Emblem ; with Hardware
Reproduction of the original "SS" rear panel emblem designed for use on 1968-69 Chevrolet Nova models. Manufactured in zinc die-cast metal to exact factory specifications ensuring a quality appearance. Each emblem features a...
1968 Chevelle, Impala, Bel Air, Caprice, 1968-69 Nova; "396" Front Side Marker Bezels; Pair
Reproduction of the original front fender side marker bezels designed for use with various 1968-69 Chevrolet models including Bel Air, Biscayne, Caprice, Chevelle, Chevy II Nova, El Camino, and Impala models. Each bezel is...
1969-70; Chevrolet; Bow Tie Steering Wheel Shroud Emblem ; Various Models; GM Licensed
Reproduction of the original Bow-Tie steering wheel shroud emblem designed for use with various 1969-70 Chevrolet models. This emblem is manufactured in die-cast zinc and features a blue Bow Tie emblem with a chrome border...
1969-74 Nova SS Dash Pad Emblem
Replacement padded dash emblem for 1969-74 Nova models. This reproduction is chrome plated plastic with adhesive backing. Improve the look of your dash panel and replace your old emblem with this reproduction.
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Replacement padded dash emblem for 1968 Nova models. This reproduction is chrome plated plastic with adhesive backing. Improve the look of your dash panel and replace your old emblem with this reproduction. {fitment} {specs}
1964-72 GM; Rear End Positraction Tag; Red; 3/4"
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
1964-81 GM; Rear End Positraction Tag; Red; 12 Bolt; 1" Tag
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-1974 "GM Mark Of Excellence" Door Deflector Decal; Embossed; Blue; Each
Reproduction of the original "GM Mark of Excellence" door reflector decal original installed on many various 1967-74 General Motors vehicles. It is used as a reflector to allow upcoming traffic to see the car door when...
1968-72 Chevrolet; "Nova By Chevrolet" Trunk Lid Emblem; GM Licensed
Reproduction of the original "Nova by Chevrolet" trunk lid emblem designed for use with 1968-72 Chevrolet Nova models. Each emblem is manufactured in quality die-cast zinc featuring a bright chrome finish. Includes all...
Tonawanda #1 Team Valve Cover Decal; Mylar Chrome; Each
Reproduction of the original Tonawanda #1 Team decal used specifically for early GM models built at the Tonawanda, New York assembly plant. Correct to the finest detail, including mirror-like mylar chrome and features...
1968-74 Camaro, Nova; Forward Console Plate Emblem; with Hardware
Reproduction of the original console plate emblem designed for use on various GM models including 1968-69 Camaro and 1968-74 Nova models. This quanlity die-cast reproduction is manufactured in zinc die-cast metal to OE...
1969 Nova Yenko; Fender, Hood, Quarter Panel Stripe Set ; Black
This correct reproduction of the stripe set Yenko Chevrolet used on their special order, high performance 1969 Yenko Nova cars. This high quality stripe set contains all the applicable decals to bring your "Yenko" to life....
1968 Impala, Caprice, Chevelle, Bel Air, Nova; SS 396 Front Side Marker Bezels; RH & LH; Pair
Reproduction of the original SS 396 front fender side marker bezels designed use with 1968-69 Chevrolet Impala, Bel Air, Biscayne, Caprice, Nova, Chevelle, and El Camino models. Each bezel is manufactured in quality die-cast...
1969-74 Chevrolet; Crossed Flag Valve Cover Insert ; for Finned Valve Cover; with Hi Performance
Correct reproduction of the original round "Crossed-Flags" decal that was applied to the passenger side valve cover. Normally used on all high performance small block finned aluminum valve covers, each insert features an...
1958-72 Chevrolet; "383 Crossed Flags" Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1968 Impala, Bel Air, Caprice, Chevelle, Nova; 502 Front Side Marker Bezel; RH & LH; Pair
Aftermark style reproduction that features a retro looking front side market bezels for modified vehicles with 502 engines. Has the same design as the early 1968 style side marker bezel, but features the "502" engine...
1964-79 Chevrolet; "454 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this early-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1963-72 Chevrolet; "502 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Custom "502" front fender emblem designed in classic style lettering for an authentic original appearance. Each emblem is manufactured in die-cast matching the original style designs of the era. If you have a 502ci engine,...
1964-89 GM; Rear Axle ID Tag; Various Models
Reproduction limited slip rear axle ID tag that ensures the correct type of gear oil is added to the rear end. This tag was mainly used with 1964-89 GM models indicating the proper lubrication requirement. Attaches to the...
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1968 Impala, Caprice, Chevelle, Bel Air, Nova; 427 Front Side Marker Bezels; RH & LH; Pair
Reproduction of the original 427 front fender side marker bezels designed use with 1968 Chevrolet Impala, Bel Air, Biscayne, Caprice, Nova, Chevelle, and El Camino models. Each bezel is manufactured in quality die-cast zinc,...
1969 Camaro, 69-70 Nova; Radiator Tag; with 396 and Manual Trans; Code ZD
Reproduction of the original radiator tag designed for use with 1969 Camaro and 1969-70 Nova models with 396 (3 row tank) and straight hose neck. Add the finishing touch to a perfect restoration by replacing the original...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
1969-72 Chevrolet; "Nova" Front Fender & Quarter Panel Emblem; with Hardware; Each; GM Licensed
Reproduction of the original "Nova" front fender and quarter panel emblem designed for use with 1968 Nova quarter panels, and 1969-72 Nova front fenders. Manufactured in zinc die-cast metal to original factory dimensions...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
This is a pressure sensitive adhesive insert for use on Yenko® models with Torque-Thrust wheels. This multi-color insert features the Yenko® bar and shield logo in the center of the insert surrounded by stars. Sold...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
1967-68 Yenko; 427 Front Fender & Rear Body Panel Emblem; Adhesive Tape Backing Yenko Licensed
OER® reproduction of the original "427" front fender and rear body panel emblem for use on 1967-1968 Yenko Camaro models. This rare emblem was applied to the 1967-68 front fenders, and the rear body panel. Manufactured in...
1969-71 Chevrolet SS ; Wheel Cap Emblem Set; 4 Piece Set
Reproduction of the original SS wheel cap emblem insert designed for use on various 1969-70 GM models including 1969 SS Camaros. The SS wheel for 1969 included a special chrome ornament with this SS emblem insert. This...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...