Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1970-81 Camaro, Firebird, 67, 69 Impala, Caprice, Hood Hinge Spring; Each; Various Models
Reproduction of the original hood hinge spring designed for use on various GM vehicles. Each spring is manufactured to replicate the original in quality and design. Will fit and install as original and features OE tension...
1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1969-70 Caprice / Impala Custom 2 Door Hardtop Clear Back Glass
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
1965-70 Impala, Electra, LeSabre, Wildcat; Convertible Top Front Header Bow; Various Models
Reproduction of the original convertible top header bow designed for use with various 1965-70 Buick, Chevrolet, Pontiac, Oldsmobile, and Pontiac full size convertible models. Each header bow is manufactured in stamped steel...
1965-70 Impala/GM B-Body Convertible; Top Only; Pinpoint Vinyl; White
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
1967-70 Impala/GM B-Body Convertible; Rear Window Only; Glass; Without Zipper; Vinyl; Black
Reproduction convertible glass rear window, manufactured using high quality lightly tinted glass and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1965-70 Impala/GM B-Body Convertible; Top Only; Pinpoint Vinyl; Dark Blue
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1967-70 Impala/GM B-Body Convertible; Rear Window Only; Glass; Without Zipper; Vinyl; Dark Blue
Reproduction convertible glass rear window, manufactured using high quality lightly tinted glass and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
Reproduction of the original hydraulic hose set designed for use with a wide variety of convertible models as listed. Original hoses for early convertibles are extremely difficult to find, making this reproduction set the...
1965-70 Impala/GM B-Body Convertible; Rear Window Only; Plastic; Pinpoint Vinyl; Beige
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1965-70 Impala/GM B-Body Convertible; Rear Window Only; Plastic; Stayfast Canvas Cloth; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight Stayfast canvas cloth materials to ensure longevity and durability. Original manufacturing techniques assure that...
Reproduction of the original front windshield glass for use with 1969-70 Buick, Chevy, Pontiac, Oldsmobile Full Size models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
1965-70 Impala, GM Convertible; Rear Window Glass; Light Green Tint
Reproduction back window glass for various 1965-70 Buick, Cadillac, Chevy, Oldsmobile, and Pontiac Full Size convertible models. Each rear window glass is manufactured in tempered glass to factory specifications featuring...
Reproduction of the original convertible top cylinder designed for use with 1965-1970 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum...
Reproduction of the original front windshield glass for use with 1969-70 Buick, Chevy, Pontiac, Oldsmobile Full Size models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
1969 Impala, GM Full-Size; 2 Door Hardtop / Convertible; Front Door Glass; LH; Custom Gray Tinted
Reproduction door glass for various 1969 GM models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance. Replaces NAGS # DD04147. Note: Shipped oversize....
1947-79 Chevy, GMC Car & Truck; Chrome Drop Mount Peep Mirror; 4"; LH or RH; Each; Various Models;
OER® Authorized reproduction drop head mirror for 1941-79 GM model cars and trucks. Early style drop head mirror mount to top edge of door frame. Features a chrome arm with a 4" mirror head. Fits sedan and truck closed...
Wiper Blade Insert; Replacement; 16" Anco Style; Each
OER reproduction Anco-style windshield wiper blade insert for various classic American vehicle models from the 1960's and up. These 16" wiper blades are manufactured from quality molded rubber as original. Refill is...
1969-70 Full-Size Chevrolet 4 Door Sedan & Station Wagon Tinted Windshield Glass With Antenna
Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the...
1964-72 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Convertible Top Latch Knuckle Hook; Each
Reproduction of the original latch knuckle hook designed for use with various GM convertible models. This component secures the convertible top to the upper windshield header, ensuring a proper seal and stable fit. Each...
Reproduction of the original front door glass window for use with various 1969 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile full size passenger models. Each glass is manufactured to correct factory specifications...
1969 Chevelle, El Camino, Impala, Bel Air, Biscayne; Hood Hinge and Spring Assemblies; LH and RH
Reproduction hood hinge and spring assemblies for 1969 Chevelle, El Camino, Impala, Bel Air, and Biscayne models. Manufactured in stamped steel to factory specifications, these assemblies restore proper hood alignment and...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1969-70 Impala, Caprice, Chevelle, Electra, Wildcat; Door Latch Assembly; 2 Door; LH Driver Side
Reproduction door latch assembly designed for use with 1969-70 GM B-Body 2-door models including Impala, Bel Air, and Biscayne. Each latch is manufactured to exact factory specifications, accurately replicating the original...
69-70 Impala/Caprice Custom 2 Door Coupe; Quarter Glass; Light Green Tint; LH
Replacing your broken or missing quarter glass with this quality reproduction will enhance the appearance and safety of your vehicle by helping you see clearly. Designed to fit and install exactly as original. Each quarter...
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
1969-70 Impala, Caprice, Chevelle, Electra, Wildcat; Door Latch Assembly; 2 Door; RH Passenger Side
Reproduction door latch assembly designed for use with 1969-70 GM B-Body 2-door models including Impala, Bel Air, and Biscayne. Each latch is manufactured to exact factory specifications, accurately replicating the original...
Original style reproduction of the outer door mirror for use with various 1968-72 GM models. Each mirror features the correct style ribbed base with "dimple" at the top of the base near the mirror head. Each mirror is...
1959-76 GM; Convertible Top Boot Silde Rail Retainer; with 8 Mounitng Holes
Reproduction of the original style convertible top boot retainer for 1959-76 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models (except Camaro, Firebird). The top boot will slide into this retainer in order to hold...
Reproduction of the original hose retainer clip designed for use with 1967-69 GM convertible models. Each clip is manufactured in stamped steel and heat treated for extra strength. This clip is designed to retain the...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1969-70 Impala, Bel Air, Biscayne, Caprice; Outer Front Door Handle Set; 2 Door Models
Quality reproduction of the original outer front door handle set designed for use on 1969-70Impala, Bel Air, Caprice, and Biscayne models. Each door handle set is manufactured in zinc die-cast metal and includes a high...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile convertible models. Manufactured in quality zinc die-cast metal, each...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 GM convertible models. Manufactured in quality zinc die-cast metal, each knuckle is built to OE factory specifications for...
Reproduction of the original hood hinge assembly designed for use on various 1969 Chevrolet models. Each hood hinge is manufactured in stamped steel to original factory specifications assuring a quality replacement. Finished...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Factory-style reproduction of the original outer door mirror designed for use on 1968-72 GM models. This high-quality replacement features convex glass to help eliminate the passenger side blind spot, improving visibility and...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1965-70 Impala, Electra, LeSabre, Bonneville, Catalina; Convertible Top Hold Down Cables; Pair; OER
Reproduction of the original convertible top hold down cables designed for use with 1965-70 Impala and GM Full Size convertible models. Each cable is made from quality materials replicating the original in appearance, design,...