1965-72 GM; Molding Clip Set; Windshield, Quarter, Back Window; 12-piece Set
Replacement style windshield molding installation clips for various GM models including, 1966-67 Chevy II and Nova and 1965-69 Impala and Full Size models. Each clip is designed and manufactured to replicate the OE style...
1968-77 GM; Molding Clip; Windshield and Back Window Reveal Molding; Each
Reproduction windshield and rear window molding steel clip to fit a wide variety of GM makes and models. Each clip will provide a snug fit for the molding being attached. The amount of clips will vary depending on the model....
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-72 El Camino, 1971-72 Sprint; Roof Drip Molding Set; LH and RH; 6 Piece
Reproduction roof drip molding set for 1968-72 Chevrolet El Camino and 1971-72 GMC Sprint models. Manufactured to factory specifications, this 6-piece polished stainless steel molding set installs along the roofline and upper...
Reproduction front windshield and back window molding retainer clip set designed for use with a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1965-72 GM; Windshield, Back Window Molding Clip; Each
Reproduction of the original style rectangular-shaped front and rear window molding clip designed for use with various 1965-72 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured to factory specifications for...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1968-72 Chevelle; El Camino; GTO; LeMans; Windshield Molding; Lower; Polished Stainless Steel
Reproduction lower front windshield molding for various 1968-72 GM A-Body models. Manufactured to factory specifications from polished stainless steel, each molding will fit and install correctly offering an authentic...
1968-69 Chevrolet Chevelle, El Camino; Hood Louver Grill Set; Chrome
Reproduction hood louver grill set for 1968-69 Chevrolet or El Camino Super Sport models. Manufactured in quality die cast replicating the original louver grill set in design and appearance. Features highly polished bright...
Reproduction upper and side front windshield reveal molding set for various 1968-72 GM A-Body models. Manufactured to factory specifications from polished stainless steel, each molding will fit and install correctly offering...
1967-74 Roof Drip Rail Connectors
Reproduction drip rail connectors for various GM vehicles without stainless steel style drip rail moldings. The connectors seam the union between the A-pillar drip rail and the roof drip rail. Manufactured from stamped steel...
Reproduction fender top edge moldings for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Monte Carlo, and 1971-72 GMC Sprint models. These moldings install along the top edge of the front fenders, replicating the original...
Reproduction front windshield and back window molding retainer clip set for a wide variety of 1964-1976 Buick, Chevrolet, Pontiac, and Oldsmobile models. Designed for emergency use, when a screw-on clip is required. Each clip...
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Screw Set, Phillips Ovl # 8 X 3/4" Screw, 12 Pcs
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 12 chrome phillips oval head #8 x 3/4" screws. Set includes 12 phillips oval head screws. Use as...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually. {fitment}
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1968-69 Chevelle, Malibu, El Camino; Front Wheel Opening Molding; RH
Reproduction RH front wheel opening molding for 1968-69 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, this bright-finished aluminum molding installs along the front wheel opening to...
1968-69 Chevelle, Malibu, El Camino; Front Wheel Opening Molding; LH
Reproduction LH front wheel opening molding for 1968-69 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, this bright-finished aluminum molding installs along the front wheel opening to...
1968-69 Chevelle, Malibu, El Camino; Rear Wheel Opening Molding; LH
Reproduction LH rear wheel opening molding for 1968-69 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, this bright-finished aluminum molding installs along the rear wheel opening to...
1968-69 Chevelle, Malibu, El Camino; Rear Wheel Opening Molding; RH
Reproduction RH rear wheel opening molding for 1968-69 Chevrolet Chevelle, Malibu, and El Camino models. Manufactured to factory specifications, this bright-finished aluminum molding installs along the rear wheel opening to...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1960-72 Chevrolet, GMC Truck; Wire Tail Molding Clip, #10-24, 4" Long, Zinc Plated, 10 Piece Set
Reproduction of the original style wire tail molding clip used on various 1960-72 Chevrolet and GMC trucks. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Wire Tail Molding Clip, #8-32, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24 With Sliding Stud, 1-5/8" Long, Zinc Chromate, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 2-1/2" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
1958-81 GM; Push-In Molding Clip; 1-1/4" with Top Tension Spring; 10 Piece Set; Various Models
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Metal Universal Break Off Style Molding Clip, #10-24 Thread, 2.5" Wide, Zinc Plated, 10 Piece Set
Replacement break off style molding clips used on various vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. #10-24 nuts sold separately. Each clip has a...
Wire Tail Molding Clip, #10-24, 1" Long, Zinc Chromate (Gold Iridescent), 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/8" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #12-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 7/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Wire Tail Molding Clip, Push In, 1-1/4" Long, Black Phosphate Coated, 10 Piece Set
Replacement metal tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Nylon Universal Break Off Style Molding Clip, Push In Type, 3" Wide, White Nylon, 10 Piece Set
Replacement break off style molding clips used on various GM vehicles. These clips are designed to be trimmed the width of the molding, features pre-scribed break off/cut off grooves. Correct hardware can make any...
Wire Tail Molding Clip, #10-24, 3/4" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-11/32" Long, Green Dip Coated, 10 Piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Wire Tail Molding Clip, #10-24, 1-3/4" Long, Green Dip Coated, 10 piece Set
Replacement wire tail molding clips used on various GM vehicles. Nuts sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This...
Nylon Tail Push In Molding Clip, 1-3/4" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, 1/4-20 Thread Size, 5/8" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Nylon Tail Push In Molding Clip, 1" Long, White Nylon, 10 Piece Set
Replacement nylon tail style push in molding clips used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Molding Clip Retaining Pal Nut, #10-24 Thread Size, 3/4" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Molding Clip Retaining Pal Nut, #8-32 Thread Size, 1/2" Diameter Washer Head, 10 Piece Set
Replacement molding clip retaining pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or...
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8
Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...
Chrome Trim Screw, #8 x 1-1/4", With #8 Phillips Oval Head, 10 Piece Set
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Serrated Self locking Hex Nut, 1/4-20 Thread Size, 10 Piece Set
Correct replacement self locking nuts used on various GM vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Chrome Trim Screw, #8 x 1-1/4", With Undersized #6 Phillips Oval Head, 10 Piece Set
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...