Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1969 Camaro, Impala, Nova; SS Steering Shroud Emblem
Superb reproduction of the original "Super Sport" steering shroud emblem designed for use on all 1969 Camaro models equipped with the SS (Super Sport) option. This premium emblem is manufactured from zinc die-cast metal and...
1969 SS 396 Front Grill Emblem ; Chevelle, El Camino
Reproduction of the original "SS 396" front grill emblem designed for use with 1969 Chevelle and El Camino Super Sport models. Manufactured in zinc die-cast metal replicating the original in fitment and appearance. Features...
1969-70; Chevrolet; Bow Tie Steering Wheel Shroud Emblem ; Various Models; GM Licensed
Reproduction of the original Bow-Tie steering wheel shroud emblem designed for use with various 1969-70 Chevrolet models. This emblem is manufactured in die-cast zinc and features a blue Bow Tie emblem with a chrome border...
1963-72 Chevrolet; "572 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1964-72 GM; Rear End Positraction Tag; Red; 3/4"
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
1964-81 GM; Rear End Positraction Tag; Red; 12 Bolt; 1" Tag
Reproduction of the original rear end positraction tag designed for use on various Buick, Chevrolet, Oldsmobile, and Pontiac models with 12 bolt positraction differentials. Each tag is manufactured in molded plastic to GM...
1968-72 Chevelle, El Camino; 1970-72 Monte Carlo; 1971-72 Sprint; Center Console 4-Speed Emblem
Reproduction center console 4-speed shift pattern emblem for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Monte Carlo, and 1971-72 GMC Sprint models. Manufactured to factory specifications, this emblem accurately...
1967-1970 Chevrolet Chevelle, Malibu; Vigilite Fender Bezel Gasket
Vigilite fender bezel gasket for 1967-70 Chevrolet Chevelle, El Camino. This is the gasket that mounts under the chrome bezel. {specs} {fitment}
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Tonawanda #1 Team Valve Cover Decal; Mylar Chrome; Each
Reproduction of the original Tonawanda #1 Team decal used specifically for early GM models built at the Tonawanda, New York assembly plant. Correct to the finest detail, including mirror-like mylar chrome and features...
1969-74 Chevrolet; Crossed Flag Valve Cover Insert ; for Finned Valve Cover; with Hi Performance
Correct reproduction of the original round "Crossed-Flags" decal that was applied to the passenger side valve cover. Normally used on all high performance small block finned aluminum valve covers, each insert features an...
1958-72 Chevrolet; "383 Crossed Flags" Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1965-76 Chevrolet; 502 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. Although the 502 engine wasn't originally installed in early model vehicles, it can be used when replacing any...
1963-72 Chevrolet; "427 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
1963-72 Chevrolet; "502 Crossed Flags"; Front Fender Emblem; Each
You've customized everything from the interior to the paint to the engine, now you can show off just what's lurking under the good with this 1967-style custom V-Flag emblem. This V-Flag emblem is intended for use on vehicles...
Custom "502" front fender emblem designed in classic style lettering for an authentic original appearance. Each emblem is manufactured in die-cast matching the original style designs of the era. If you have a 502ci engine,...
Reproduction of the original radiator tag code BR for 1969 Chevrolet Chevelle 396, 375HP Automatic transmission. These are factory style metal tags that GM put on all radiators. It gives you the codes that GM put on their...
Reproduction of the original radiator tag code BO for 1969 Chevrolet Chevelle 396, 375HP manual transmission. These are factory style metal tags that GM put on all radiators. It gives you the codes that GM put on their...
1964-89 GM; Rear Axle ID Tag; Various Models
Reproduction limited slip rear axle ID tag that ensures the correct type of gear oil is added to the rear end. This tag was mainly used with 1964-89 GM models indicating the proper lubrication requirement. Attaches to the...
1969 Chevrolet Chavelle, El Camino; Bezel; Front Fender and Rear Quarter Panel Marker Lamp
This is a reproduction of the front and rear marker lamp bezel 1969-69 Chevrolet Chevelle and El Camino. These bezels feature triple chrome plating. It does not have engine designation. Sold individually. Four per vehicle....
1958-89 Various GM Vehicles Camaro, Firebird, Regal, 442; Differential Limited Slip Lube; Tag
Positive traction differential metal tag that states "USE LIMITED SLIP DIFFERENTIAL LUBE ONLY" for multiple 1967-89 GM vehicles which includes Firebird, Camaro, Regal, 442 models. Give the differential the original look with...
1969-70 Chevrolet Chevelle, Malibu, El Camino; 396 Fender Emblem
Reproduction 396 engine callout fender emblem. This emblem fits on left or right side on the front fender on 1969-70 Chevrolet A-Body models. Zinc die-cast emblem features chrome plated 396 numerals for an original factory...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; "Body by Fisher" Door Sill Plate Emblem; Embossed; Each
Reproduction "Body By Fisher" door sill plate emblem for GM vehicles. This emblem is manufactured to correct specifications and includes the correct coach colors and the word "Fisher" embossed on the emblem with a peel and...
1965-70 Chevrolet; 375 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 450 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
1965-73 Chevrolet; 400 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
1965-69 Chevrolet; 396 Crossed Flags Air Cleaner Emblem; Die-Cast
OER® die-cast air cleaner emblem, featuring correctly painted crossed flags and a superb chrome plated finish. This unique replacement emblem is designed with modern adhesive backing for simple, secure application to the...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
1965-73 Chevrolet; 425 HP Turbo-Jet; Air Cleaner Emblem; Die-Cast
This OER® die-cast air cleaner emblem is similar in shape and size to the turbo-jet decal used on the air cleaners of various big block equipped vehicles of the era. This unique replacement emblem features a superb chrome...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...