1968-69 Camaro SS; Hood Louver Ornament Set; with Hardware; Pair; "Show Quality"
Reproduction of the original die-cast hood louvers designed for use with all 1968-69 Camaro Super Sport models equipped with a 350 or 396 engine. Manufactured with OER® exclusive tooling to exact factory specifications....
Reproduction GM bumper bolt for a variety of General Motors and Chrysler applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long...
Reproduction bumper bolt for a variety of General Motors applications. Each zinc-plated steel carriage bolt features a polished stainless steel cap for superb cosmetic appearance, corrosion resistance and long life. Each bolt...
1967-69 Camaro, Firebird; Convertible Top Boot Clip; Each
Correct reproduction top boot clips for 1967-69 Camaro and Firebird convertible models. These clips are specifically designed to hold the top boot to the convertible well molding when the convertible top is in the down...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
Reproduction of the original outer door mirror designed for use with various 1968-72 GM models. Each mirror is precision-manufactured in high-quality die-cast zinc, replicating the original design, fit, and finish for an...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
1962-72 Chevrolet/Pontiac; OE Style Firewall Pad Fastener; Plastic; 7/16" X 1.50"; Various Models
Correct reproduction plastic firewall pad fastener for various GM models including 1967-69 Camaro, 1967-69 Firebird, 1962-72 Nova and 1962-69 Impala models. These fasteners are required to allow the firewall pad to attach...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1969 Camaro; Endura Front Bumper; Urethane; Made in the USA
The front fascia of the 1969 Camaro is iconic. Be it a base model, Z/28, RS, or SS, there's no mistaking this vintage Camaro as one of the most recognizable and best looking vehicles around. However, many enthusiasts agree...
1968-69 Camaro, Firebird, 1968-79 Nova, X-body; Door Hinge Rebuild Kit
Reproduction of the original components necessary to rebuild the door hinges on various GM models. Each door hinge set includes hinge pins, retaining clips, bushings, tension springs, roller detent studs and hardware for...
1968-79 Camaro, Chevelle, Impala, Nova, Ventura; Rear License Plate Bracket; with Hinge; EDP Coated
Reproduction rear license plate bracket designed for various 1968-79 GM models. This authentic OE-style bracket is manufactured from quality stamped steel and includes a spring-loaded hinged door that allows access to the...
1967-69 Camaro, Firebird; Quarter Window Attachment Assembly; LH Drivers Side
Reproduction of the original rear window attachment and roller assembly designed for use on 1967-69 Camaro and Firebird models. This quarter window attachment assembly includes window mount bracket and two rollers that attach...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1969 Camaro, Firebird, 1968-79 Nova, GM X-Body; Lower Door Hinge; LH Drivers Side
Reproduction of the original door hinge assembly designed for use with the applications listed below. Each hinge is manufactured in high quality cast steel, accurately replicating the original factory design for strength,...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
1967-69 Camaro, Firebird, 1968-70 Nova; Windshield Washer Hose Set
Reproduction of the original style windshield washer hoses pre-cut to proper factory lengths for various GM models. This set features the correct ribbed-style hoses to replicate the originals for authenticity. Each kit...
1969 Camaro; Lower Rear Bumper Guard Set; Pair
Reproduction of the original rear bumperette guards designed for use with 1969 standard Camaro models. These bumper guards attach to the rear bumper and extend downword below the rear bumper. This bumperette was a standard...
1969 Camaro, Firebird, 1968-79 Nova; Lower Door Hinge; RH Passenger Side; Various Models
Reproduction of the original door hinge assembly designed for use with the applications listed below. Each hinge is manufactured in high quality cast steel, accurately replicating the original factory design for strength,...
1969 Camaro, Firebird, 1969-70 Nova; Door Latch Assembly; RH Passenger Side
Reproduction of the original door latch assembly designed for use with 1969 Chevrolet Camaro, Pontiac Firebird, and 1969-70 Chevrolet Nova models. Each latch is manufactured using modern tooling and high-quality stamped steel...
1969 Camaro, Firebird, 1968-79 Nova, GM X-Body; Upper Door Hinge; LH Drivers Side; Various Models
OER® reproduction of the upper door hinge designed for use on various GM models. Each hinge is manufactured from heavy-duty stamped cast iron steel, ensuring strength, durability, and long-lasting performance. Designed to...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1969 Camaro; Front Bumper; Chrome; OER Premier™ Show Quality
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-68 Camaro models. The OER Premier bumper is designed exclusively for the restorer who demands the best the market has to offer....
1969 Chevy Camaro; Deluxe Rear Bumper Guard; with Rubber Insert; RH or LH; Each
Exact reproduction of the original rear bumper guard designed for use with 1969 Camaro models. Manufactured in quality die-cast zinc featuring a beautiful triple chrome plated finish. This is the deluxe style rear bumper...
1967-69 Camaro, Firebird; Manual Rear Quarter Window Regulator; RH Passenger Side
OER® reproduction quarter window regulator for 1967-69 Camaro and Firebird models. Each quarter window regulator will install on models with standard or deluxe interiors. Fits coupe or convertible models. Completely...
1967-69 Camaro, Firebird; Manual Rear Quarter Window Regulator; LH Driver Side
OER® reproduction quarter window regulator for 1967-69 Camaro and Firebird models. Each quarter window regulator will install on models with standard or deluxe interiors. Fits coupe or convertible models. Completely...
1967-1969 Camaro / Firebird Rear Spoiler Stud Set
Complete stud set for original GM rear spoilers with removable studs. This stud kit is designed for original style rear spoilers with removable studs. Most reproductions have the studs molded into the spoiler. Note: The studs...
1969 Camaro, Firebird, 1968-79 Nova, GM X-Body; Upper Door Hinge; RH Passenger Side
OER® reproduction of the upper door hinge designed for use on various GM models. Each hinge is manufactured from heavy-duty stamped cast iron steel, ensuring strength, durability, and long-lasting performance. Designed to...
1968-69 Camaro, Firebird; Manual Front Door Window Regulator; with Deluxe Interior; LH Driver Side
OER® reproduction of the original window regulator designed for use with 1968-69 Camaro and Firebird models with deluxe interiors. Each regulator is manufactured to replicate the original in quality and design. The latest...
1968-69 Camaro, Firebird; Manual Door Window Regulator; Standard Interior; LH Driver Side
OER® reproduction window regulator for 1968-69 Camaro and Firebird models with standard interiors. Each regulator is manufactured to replicate the original in quality and design. The latest manufacturing methods are...
1968-69 Camaro, Firebird, 1968-79 Nova & GM X Body; Lower Door Hinge Roller Detent Repair Set
Repairing a broken door hinge just got easier with the comprehensive lower door hinge roller detent set for various GM models. Rather than purchasing a more expensive new hinge, this kit could save you from the expense of...
1969 Camaro; Rear Bumper Bracket Set; Inner & Outer; 4 Piece Set
Reproduction of the original rear bumper bracket set designed for use with 1969 Chevrolet Camaro models. These brackets are manufactured from high-grade stamped steel and precisely replicate the original GM design for...
1964-72 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Convertible Top Latch Knuckle Hook; Each
Reproduction of the original latch knuckle hook designed for use with various GM convertible models. This component secures the convertible top to the upper windshield header, ensuring a proper seal and stable fit. Each...
1969 Chevrolet Camaro; Endura Bumper Inner Extension Brackets; RH & LH; Pair
Accurately restore the front-end structure of your 1969 Chevrolet Camaro** equipped with the optional **Endura urethane front bumper** using this **correct reproduction inner bumper bracket set. Each bracket is precisely...
1969 Chevrolet Camaro; Front Bumper Guard Set; Deluxe; with Rubber Inserts & Hadware; Pair
Reproduction of the original deluxe style front bumper guards designed for use on 1969 Camaro models. Manufactured to exact factory specifications assuring a quality appearance and fit featuring a bright triple chrome plated...
1967-69 Camaro, Firebird; Outer Door Handle Push Button Set; RH & LH Doors; Pair
Reproduction of the original outer door handle push button assemblies designed for use with 1967-69 Chevrolet Camaro and Pontiac Firebird models. Each push button is manufactured to factory specifications for proper fit and...
1967-69 Camaro, Firebird, 1966-79 Nova; Fiberglass Hood Springs; 11 lbs; Low Tension Design; Pair
Never have to use a 'prop' rod on your fiberglass hood again. These lower tension springs allow you to retain the original hood functionality without needing assistance to open it. Designed to fit in the stock position, these...
1967-69 Camaro, Firebird; Quarter Window Glass; Coupe; Clear; RH Passenger Side
Reproduction of the original quarter window glass designed for use with 1967-69 Camaro and Firebird coupe models. Each quarter window glass is manufactured to correct OEM specifications offering an authentic appearance and...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Reproduction license plate rubber bumpers for various GM models including 1967-68 Camaro front or rear. Each bumper replicates the original in fit and appearance. Will replace the original worn out or missing original rubber...
1967-70 Camaro, 1965-68 Impala, Bel Air, Caprice, 1968 Chevelle; Hood Latch Pop-Up Spring
Reproduction hood pop-up spring for 1967-81 Camaro, 1965-68 Impala, Bel Air, Biscayne, Caprice, and 1968 Chevelle, El Camino models. Measures 3-3/4" long and features a black EDP coating for rust and corrosion prevention....
1967-69 Chevy Camaro; Cowl Induction Hood Spring; 26 Coils; Each; Made in the USA!
Reproduction of the original 1969 Camaro cowl induction hood spring. Can also be used for 1967-68 Camaro models with cowl hoods. Manufactured to exact dimensions from premium grade spring steel with a black chromate finish...
1967-69 Camaro, Firebird; Convertible Outer Pillar Post Molding; Chrome; LH Driver Side
Reproduction of the original outer pillar post molding designed for use on 1967-69 Camaro and Firebird convertible models. Each molding is reproduced in quality polished stainless steel that replicates the original in...
Original style reproduction of the outer door mirror for use with various 1968-72 GM models. Each mirror features the correct style ribbed base with "dimple" at the top of the base near the mirror head. Each mirror is...
1967-69 Camaro; Bumper Guard Rubber Insert; Each
Reproduction bumper guard inserts for 1967-69 Camaro models with the optional deluxe front bumper guards, or 1967-68 Camaro models with deluxe rear bumper guards. This rubber insert installs directly into the bumper guard...
Reproduction of the original hose retainer clip designed for use with 1967-69 GM convertible models. Each clip is manufactured in stamped steel and heat treated for extra strength. This clip is designed to retain the...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1967-69 Camaro, Firebird; Convertible Hold Down Latches; for Manual Top ; Pair
Reproduction of the original convertible top latch designed for use with 1967-69 Camaro and Firebird models equipped with manual convertible tops. Each latch is manufactured to OE factory specifications and features the...
1969 Camaro; Trunk Lock Retainer
OER reproduction trunk lock retainer for 1969 Camaro models. Each retainer is manufactured in quality stamped steel to the original configuration replicating the original in design, appearance, and fitment. Features and...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile convertible models. Manufactured in quality zinc die-cast metal, each...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1968-69 Camaro, Firebird; Door Glass Rear Stops; Pair
Reproduction of the original door glass window rear stops designed for use with all 1968-69 Camaro and Firebird models. Each door glass stop is manufactured in cast metal replicating the original GM component in design and...
1967-92 Camaro, Firebird; Hood Prop Rod for Fiberglass Hoods; Each; Made in the USA!
Hood prop required when installing a fiberglass hood on your Camaro or Firebird. Since hood springs are not recommended when using fiberglass hoods, this prop is essential for keeping your hood open while working in the...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 GM convertible models. Manufactured in quality zinc die-cast metal, each knuckle is built to OE factory specifications for...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Factory-style reproduction of the original outer door mirror designed for use on 1968-72 GM models. This high-quality replacement features convex glass to help eliminate the passenger side blind spot, improving visibility and...
1966-71 Yenko; License Plate Frame; Hi-Performance by Yenko; Each
Reproduction 4-hole style Yenko® license plate frame featuring the brand's hometown name and the tagline, "Hi-Performance by Yenko®", which is what the Yenko® brand is all about. Each frame is produced in die-cast...