1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
This is an OER® Authorized reproduction chrome bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This authentic reproduction bumper is manufactured to original factory...
1967-70 Chevy, GM, Blazer, Jimmy, Suburban; Chrome Front Bumper; Reproduction
OER® Authorized quality reproduction of the original front bumper designed for use with 1967-70 Chevrolet and GMC truck models. Each bumper is designed and manufactured to duplicate the original in virtually every detail....
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1962-84 GM; Windshield Washer Jar Cap; Various Models
Reproduction of the original windshield washer jar cap designed for use on a variety of GM models including 1967-1974 Camaro. Manufactured in durable injection-molded ABS, this cap replicates the original design and includes...
1962-1977 GM; Windshield Washer Jar Bracket; Various Models
OER® replacement of the original windshield washer jat bracket designed for use on various 1962-77 GM models as listed. This bracket is manufactured in stamped steel and features an EDP coating for rust resistance. This...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1947-72 Chevrolet/GMC Truck Outer Door Mirror Arm Mounting Screw Set
OER® reproduction 3 piece stainless steel screw set for mounting the outer door side mirror arms on 1947-72 Chevrolet and GMC trucks. One set per mirror arm required. Note: Not for use on 1970-72 door mirror assemblies....
Flush mount front windshield glass for 1967-72 Chevrolet or GMC C/K-Series pickup truck and SUV models. This custom made windshield glass is manufactured slightly larger than the original allowing you to eliminate the outer...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; Chrome; LH Driver Side
Upgrade the look of your 1967-72 Chevrolet or GMC truck with this custom reproduction front inner fender skirt. Designed for Pickup, Blazer, Jimmy, and Suburban models, this panel is precision-stamped to original GM...
OER®OER® reproduction of the Trico RF-15 style wiper blade insert/refill for 15" TRICO wiper blades. This period-correct RF-15 style insert features a stainless steel vertebrae and a precision wiping edge manufactured...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1967-70 Chevy Pickup, Blazer, Suburban; Front Bumper ; Chrome; OER Premier® Show Quality
OER Premier™ reproduction of the original chrome front bumper designed for use on 1967-70 Chevrolet pickup, sedan delivery, Blazer, and Suburban models. This reproduction bumper is designed exclusively for the restorer...
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy, Suburban; Rear Bumper; Chrome
OER Premier™ reproduction chrome rear bumper for 1967-72 Chevrolet and GMC Fleetside pickup trucks, Blazer, Jimmy, and Suburban models. This reproduction rear bumper is designed exclusively for the restorer who demands...
Reproduction front bumper guards for 1967-72 Chevrolet/GMC pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic original equipment...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy Pickup, Blazer, Suburban; Front Bumper Guards; with Hardware; Pair
Reproduction front bumper guards for 1967-72 Chevrolet pickup, Blazer and Suburban models. Manufactured to OE specifications in stamped steel with brightly poilshed chrome plating for an authentic appearance. Includes...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Green Tint; w/o Band
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Front Windshield Glass; Clear
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; RH Passenger Side
Restore the factory look of your 1967-72 Chevrolet or GMC truck with this premium reproduction inner front fender skirt. Designed for Pickup, Blazer, Jimmy, and 1967 Suburban models, this panel is precisely stamped from...
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Front Fender Skirt; LH Driver Side
Bring back the authentic factory look of your 1967-72 Chevrolet or GMC truck with this high-quality reproduction inner front fender skirt. Designed to fit Pickup, Blazer, Jimmy, and Suburban models, this panel is...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; LH
Reproduction door latch for 1967-72 Chevrolet and GMC truck models. Manufactured to factory specifications to replace the original in appearance and fit. Fits Left Hand (Driver) Side. {fitment}
Reproduction of the original windshield designed for use with 1967-72 Chevrolet and GMC truck models as listed below. Each windshield is manufactured to factory specifications and replicates the original in appearance and...
1967-72 Chevy, GMC Pickup. Blazer, Jimmy, Suburban; Windshield Wiper Motor Transmission Arm Assembly
Reproduction windshield wiper motor transmission arm assembly for 1967-1972 Chevrolet and GMC truck models. Each assembly is manufactured to original GM specifications, replicating the factory design, quality, and fitment. A...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box; with Bracing; RH Passenger Side
Reproduction of the original rocker box for 1969-72 Blazer and 1970-72 Jimmy models. Each rocker box is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1969-72 Chevy Blazer, GMC Jimmy; Rocker Box; with Bracing; LH Driver Side
Reproduction of the original rocker box for 1969-72 Blazer and 1970-72 Jimmy models. Each rocker box is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
Newly tooled heavy duty heat treated OER Premier reproduction hood hinge assembly set for 1967-72 Chevrolet and GMC truck models. Each hood hinge set has been re-tooled to be a perfect replication of the factory original that...
1967-71 Chevrolet, GMC Pickup, Blazer, Jimmy, Suburban; Manual Window Regulator; RH Paassenger Side
OER® Authorized reproduction of the original door window regulator designed for use with 1967-71 Chevrolet and GMC pickup, Blazer, Suburban, and Jimmy models. Each regulator is manufactured to OE specifications and...
1967-70 Chevy, GMC Truck; Front Bumper Bracket Set; for 4 Wheel Drive; with Hardware
Reproduction of the original front bumper brackets for various Chevrolet and GMC 4 wheel drive models (as listed). Each front bumper bracket set is manufactured in quality stamped steel to the original configuration for a...
1967-91 Chevy, GMC Pickup, Blazer, Suburban; Bracket; License Plate; Rear; Chrome Plated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
1967-72 Chevrolet, GMC Truck; Lower Glass Channel; LH Driver Side
Reproduction of the original lower glass channel for 1967-72 Chevrolet and GMC truck models. Each channel is manufactured to original factory specifications offering an original appearance and fit. This is lower channel that...
1967-72 Chevrolet, GMC Truck; Lower Glass Channel; RH Passenger Side
Reproduction of the original lower glass channel for 1967-72 Chevrolet and GMC truck models. Each channel is manufactured to original factory specifications offering an original appearance and fit. This is lower channel that...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1967-72 Chevrolet/GMC Truck, Suburban; Door Latch Striker Plates; LH And RH
Reproduction door latch striker plates for 1967-72 Chevrolet & GMC truck, Panel, Blazer, Jimmy, and Suburban models. Each striker plate is manufactured in quality stamped steel to original factory specifications. Will replace...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-72 Chevrolet, GMC C/K Fleetside Pickup Truck; Tailgate Trunnions
Reproduction of the original lower tailgate trunnion for 1967-72 Chevrolet and GMC Fleetside pickup truck models. Bolts onto the bed side where the tailgate pivots. Also known as the hinge ball. {fitment}
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
1967-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear License Plate Bracket; EDP Coated
Reproduction stamped steel license plate bracket for 1967-86 Chevrolet/GMC C/K-Series, and 1987-91 R/V-Series Pickup, Blazer/Jimmy, Suburban, and 1973-87 G-Series Van. Each bracket is designed to replace the OE rear license...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1967-76 Chevy, GMC Fleetside Pickup, Blazer, Jimmy; Tailgate Latch Set; First Design; Zinc Plated
Reproduction tailgate latch set for 1967-75 and 1976 first design Chevrolet & GMC fleetside pickup. Also fits 1969-75 and first design 1976 Blazer, Jimmy models. Each set is manufactured with a stamped steel housing,...
1969-70 Chevrolet Truck; Hood Latch Assembly; EDP Coated
Reproduction of the original hood latch for 1969-70 Chevrolet truck models. Each latch is manufactured in quality stamped steel replicating the original in quality and fitment. This latch features the locking mechanism that...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Windshield Washer Hose Kit
Repair your 1967-1972 Chevy/GMC truck windshield washer system with this new reproduction washer hose kit. Manufactured in original-style materials and proper factory sizes, this kit provides everything needed to restore...
Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
1967-73 Chevrolet/GMC Fleetside Truck, Blazer, Jimmy; Tailgate Handle; Black
Reproduction tailgate handle for 1967-73 Chevrolet & GMC fleetside truck and 1969-73 Blazer/Jimmy models without removeable top. When pulled up, the tailgate handle releases the two latches and opens the tailgate. Replaces OE...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1968-72 GM Truck Door Vent Glass 8" x 18", 1 hole; Smoke Gray Tint
Replace your side vent window glass with replacement glass. This is the replacement glass only, frame around glass and weatherstrip are not included (sold separately). Sold individually. Fits left hand (driver side) or right...