1967-72 Camaro, Firebird; Console Lid & Console Ashtray Lid Rubber Stopper; Each
Reproduction console lid and ash tray lid rubber stoppers designed for use with 1967-72 Camaro and Firebird models. These stoppers are precision-molded to OEM specifications to deliver a factory-original fit and appearance....
OER® reproduction of the original style rubber bumper designed for use with various GM applications. Each rubber stopper is manufactured to correct specifications in EPDM rubber ensuring long lasting quality. Will fit...
1967-69 Camaro, Firebird; Convertible Top Frame Rubber Stoppers; Pair
Reproduction of the original convertible top frame runner stoppers designed for use with 1967-69 Camaro and Firebird convertible models. These specialized stoppers are engineered to maintain the correct spacing between the...
1937-80 GM, 1961-64 Impala, 1964-72 El Camino; Gas Door Bumpers; 1937-58 1-prong Door Bumpers; Pair
Correct reproduction rubber bumper for various GM applications. Fits: 1937-1958 GM full size vehicle door bumper, single prong style, front or rear. 1961-64 full size and 1964-72 El Camino gas filler door. Keeps the door from...
Rubber Floor Pan Plug; 1-1/4" Diameter. Fits 1" Hole; Each
Reproduction rubber floor pan plug measures 1-1/4" diameter and fits a 1" hole. Sold individually, use as required.
1969 Camaro RS; Rubber Stopper Kit; for Rally Sport Models; 22 Piece Set
OER® reproduction of the original rubber stoppers and bumpers originally installed on all 1969 Camaro Rally Sport and RS/SS models. The rubber stopper set includes all the correct stoppers and rubber bumpers required for...
1967-69 Camaro, Firebird, 1968-79 Nova; Front Door Bumper; Each
Correct replacement front door rubber bumper for 1967-1969 Camaro, Firebird, 1967-70 Impala, Full Size, 1968-79 Nova, X body 4 door models. Each bumper is replicated to the original OE specifications and fits the door...
1961-81 Buick, Chevy, Pontiac, Oldsmobile; Trunk Lid Rubber Bumper On Lid; Each; Various Models
Correct reproduction of the original trunk lid rubber bumper for use with various 1961-81 Buick, Chevy, Pontiac, and Oldsmobile models. Manufactured in EPDM rubber to factory specifications. Used to eliminate the trunk lid...
1958-84 GM; Outer Rear Hood Rubber Stoppers; Pair; Various Models
Reproduction outer rear hood bumpers for various GM models. Each bumper is manufactured to quality EPDM rubber compound and matches the original in dimensions allowing proper fitment. Sold in pairs. Use as required Buick...
1968-74 Nova, Apollo, Omega, Ventura; Rubber Stopper Set; 14 Piece Set
Reproduction of the original common rubber bumpers and stoppers used in 1968 Chevy II and 1968-72 Nova and X body models. Each stopper kit includes a variety of rubber bumpers and stoppers that will replace the commonly...
1959-79 Buick, Chevy, Pontiac, Oldsmobile; Seat Back Bumper; Oval Style; Each; Various Models
Reproduction of the original oval style seat back bumper designed for use on various 1959-79 GM vehicles. Each bumper is manufactured in hard rubber including a steel core for added strength. The bumper is installed where the...
1968-81 Nova, Apollo, Omega, Phoenix, Ventura; Outer Door Rubber Stopper Set ; 4 piece set
Reproduction of the original style rubber bumpers designed for use on 1968-79 Chevy II, Nova, and GM X-body models. The rubber stoppers on your door will wear out or detereriate over time. These reproduction stoppers will...
1961-83 GM; Seat Back Rubber Bumper Stopper; Various Uses & Models; Each
Correct replacement of the rubber bumper for use on various GM models. This rubber stopper will help insure that your seat/hood is aligned properly. Sold individually. Use as required per vehicle. 1-3/16" long, diameter of...
1968-81 Camaro, Impala, Firebird; Door Glass Guide Stop Bumpers; Pair; Various GM
Reproduction of the original door glass guide stop bumpers designed for use with various 1968-81 General Motors vehicles. These glass guide stops are required for proper door glass alignment. Commonly damaged during removal...
1969 Camaro; Rubber Stopper Kit; Standard Models; 18 Piece Set
OER® reproduction of the original rubber stoppers and bumpers originally installed on all 1969 standard Camaro models. The rubber stopper set includes all the correct stoppers and rubber bumpers required for the driver's...
1967-69 Camaro, Firebird; Convertible Header Bow Bumpers; Pair
Replace the cracked or hardened header bow stops on your 1967-69 Camaro or Firebird convertible with these authentic reproductions. Manufactured with high-density material and correct factory color, these stops ensure proper...
1967-70 Impala, Full Size Passenger Cars; Door Bumper Set; 4-Piece
Reproduction door bumper set for 1967-70 Chevrolet full size car models including Impala, Caprice, Bel Air and Biscayne models. This is a set of 4 rubber bumpers.
1942-77 GM; Hood Adjustment Rubber Bumpers; Round; Pair; Various Models
Reproduction hood adjustment bumpers for various 1942-77 GM models. These 7/8" OD reproduction stoppers are manufactured in quality rubber and designed to replace the worn out, deteriorated, or lost originals. Allows for a...
1961-79 GM; Bucket Seat Back Rubber Stopper Set; Round; w/Mounting Screws; Pair
Reproduction of the original seat back rubber stoppers designed for use on various 1961-79 GM models. These rubber stoppers help prevent rattling and keep the seat back positioned correctly. Replace worn out or missing seat...
1958-77 Buick, Chevy, Olds, Pontiac; Hood Adjust Bumper and Screw Set; Various Models
Reproduction hood adjustment bumpers for various 1958-77 GM models including 1967-69 Camaro and Firebird models. These 7/8" OD reproduction stoppers and screws are manufactured to original specifications to replace the worn...
1967-72 Chevy C10, Blazer, Jimmy, Suburban; Hood Bumper Set ; 6 Piece Set
Reproduction of the original style hood bumpers designed for use on 1967-72 Chevrolet and GMC pickup, Blazer, Jimmy, and Suburban models. Hood bumpers are manufactured in quality EDPM rubber and feature correct dimensions for...
1955-1976 Glove Box Door Arm Rubber Stopper
Reproduction of the original glove box door arm rubber stopper designed for use on various GM models. Eliminate the rattling and looseness of the glove box door by simply replacing the worn out or missing rubber glove box...
1967-72 Chevy, GMC Pickup, Blazer, Suburban; Hood Side Rubber Stopper Set; 4 Piece
OER® reproduction of the original hood to fender rubber stoppers designed for use on 1967-72 Chevrolet and GMC truck models. These uniquely designed bumpers will replace the originals exactly offering years of service...
1967-72 Chevrolet / GMC Truck Ash Tray Bumper
OER® reproduction ash tray bumper for use on 1967-72 pickups and Blazers. Front tray bumper (height decreased from 1st design). 2 required, sold individually. You are assured that every OER® part offered is...
1968-69 Camaro, Firebird; Rear Axle Bumper with Bracket; RH Passenger Side
Reproduction of the original rear axle bumper and bracket for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully...
1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair
Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...
Lower Control Arm Bumper / Rear Axle Bumper
Replacement rear axle bumper / lower control arm bumper for models listed below. 1962-67 Chevy II/Nova rear axle bumper. 2 required. 1963-87 Chevrolet/GMC Truck lower control arm bumper. 2 required.
1968-69 Camaro, Firebird; Rear Axle Bumper with Bracket; LH Driver Side
Reproduction of the original rear axle bumper and bracket for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully...
1955-1981 GM; Firewall Pad Fastener; Each
This reproduction firewall pad fastener is designed to hold the firewall insulation pad in place on various 1955-81 General Motors models. Each fastener is manufactured from EPDM rubber replicating the original configuration...
1968-72 Lower Control Arm Bumper ; Each
Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-69 Camaro and Firebird models. Each control arm bumper is manufactured in hard rubber featuring correct mounting...
1962-70 Chevrolet; Pontiac; Control Arm Bumper; Rubber; Various Models
Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....
1962-81 GM; Glove Box Door Arm Rubber Bumper
OER® reproduction of the original glove box door arm rubber bumper designed for use with various 1962-81 GM models. This rubber bumper is manufactured in EPDM rubber to the original factory configuration. Was installed on...
1951-72 Buick, Chevrolet, Pontiac, Oldsmobile; Convertible Power Top Motor Mounting Grommet; Each
Reproduction of the original rubber mounting/insulation grommet used on various GM vehicles with the optional power top. These rubber grommets install on the pump assembly and secure it to the vehicle while creating a damper...
1968-69 Camaro, Firebird; Rear Axle Bumper; Each
Reproduction of the original rear axle bumper for 1968-69 Camaro and Firebird models. This bumper is necessary to keep the your rear axle from hitting the rear frame rails when the rear suspension is fully compressed. For use...
Reproduction rubber bumper for various GM applications. Each bumper is manufactured in EPDM rubber to factory specifications replicating the original in design and fitment. This bumper was used for various applications...
1966-1979 Camaro, Impala, Nova; Rubber Side Hood Bumper; Each
Reproduction of the original style side hood rubber bumper designed for use various GM models. Over time, the rubber stoppers on your hood can wear out or deteriorate. These reproduction stoppers will help keep your hood...
1938-91 GM; Consol & Glove Box Rubber Stoppers; Fits 1/4" Hole; Pair
Eliminate the rattling and looseness of the glove box or console door by simply replacing worn out or missing rubber stoppers with these high quality reproduction rubber stoppers. Designed for use with a variety of 1938-1991...
Reproduction license plate / fuel door stoppers for the rear license bracket. These are OE type reproductions manufactured to exact OE specifications. Sold in pairs. 9/16" diameter, 13/16" tall. GM Note: REV. 5-80 (cut 1/4"...
1962-78 Nova, Camaro, Firebird, Impala, Truck; Speedometer Cable Firewall Grommet; w/Steel Insert
Quality reproduction of the original speedometer cable firewall grommet designed for use on various 1962-73 Chevy II Nova, Camaro, Impala, Bel Air, Biscayne, Caprice, Firebird, and 1973-78 Chevrolet, GMC truck models as...
1954-1981 GM; Hood Adjustor Rubber Bumper & Stud; Various GM Cars & Trucks
Reproduction 5/16-18 x 1-1/2" hood bumper. Includes correctly threaded stud with a 1" diameter x 1/2" tall round rubber top. Helps keep the hood aligned when installed. Can be adjusted higher or lower. 2 hood adjust bumpers...
1970-90 GM; Lower Door Window Stop Bumper; Each; Various Models
Correct reproduction rubber stop bumper designed to keep the door glass from rolling down beyond the required travel point. Each stopper is manufactures from quality EPDM rubber and features a press fit retaining tab for easy...
1967-72 Chevrolet & GMC Fleetside Pickup; Tailgate Rubber Bumpers; 4 Piece Set
Reproduction rubber tailgate bumpers for 1967-72 GM Fleetside pickup truck models. Replacing the tailgate rubber stoppers will help ensure alignment of the tailgate and provide sound dampening when closing the gate. Each...
1967-1969 Camaro, Firebird, 1969-1979 Nova, Ventura; Dash Ash Tray Rubber Bumpers, Pair
Reproduction of the original style rectangular ash tray to dash rubber bumpers designed for use with various 1967-1979 models as listed. Each rubber bumper is manufactured in quality EPDM rubber compound replicating the...
1968-96 Impala, Chevelle, Corvette; Hood Rear Panel Bumper, Each, Various Models
Reproduction of the original rear hood panel bumper designed for use on various 1968-96 GM models. Exact reproduction of the original rear hood bumper used to replace the worn out or missing original. Manufactured to exact...
Reproduction of the original rubber stopper designed for use on the upper door section of the various GM models listed below. Each rubber stopper is manufactured to replicate the original in fitment and appearance. This...
1958-72 Buick, Chevy, Olds, Pontiac; Trunk Lid Rubber Stopper; Each; Various Models
Correct OER® reproduction of the original trunk lid rubber bumpers designed for use with various 1958-72 GM models. These rubber bumpers are engineered to replicate the factory originals in design, fit, and function. Each...
1964-91 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Door Rubber Bumper Set, 4 Piece Set
OER® reproduction of the original door rubber bumpers designed for use on 1964-1986 C/K and 1987-91 R/V model Chevrolet and GMC pickup trucks. Each rubber stopper is designed to exact factory specifications for a perfect...
1967-69 Camaro, Firebird; Roof Rail Weatherstrip Blowout Clip Set; Coupe; 4 Piece
Reproduction of the original spring steel clips used to retain the pillar and roof stainless moldings at the front window top outer corners. Manufactured by OER in spring steel with rubber dipped ends as original. These...
1968-69 Camaro; Rally Sport Firewall Grommet; EPDM Molded Rubber
Reproduction of the original firewall grommet designed for use with 1968-69 Chevrolet Camaro models equipped with the Rally Sport hidden headlight option. Manufactured from high-quality EPDM rubber, this grommet accurately...