1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1967-72; Chevrolet/GMC C10; Frame Rebuild Starter Kit; 8-Pieces; With Factory Holes; OE Style
Reproduction LH and RH frame rail set with factory style holes for mounting OE style brackets, OE style crossmembers, and other factory original component parts into their original factory locations. 6 of the most commonly...
1969 Camaro, Firebird, 1969-72 Nova Subframe Assembly; with TH400 Crossmember; OEM Style
Reproduction of the original complete sunframe assembly designed for use with 1969 Camaro, Firebird, and 1969-72 Nova models with TH 400 crossmembers. Why waste money trying to repair a damaged subframe that may be...
1963-70 Chevrolet C10; Tubular Control Arm Set; Coil Over Type; Upper and Lower
Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to coil-over shocks. Each set includes upper and lower tubular control arms, and upper...
Leaf Spring U-Bolts; 3-1/4" Wide X 6-3/4" Long; Fits 3-1/4" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
1963-70 Chevy and GMC Truck; Lower Control Arms; Pair
Tubular Replacement lower control arms for 1963-70 Chevrolet and GMC 1/2 Ton C10 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each...
5 Leaf Rear Leaf Springs (Spring Rate 143 Lbs) - Replacement Style
Replace the sagging leaf springs on your classic GM vehicle with this quality set produced by OER! These replacement rear leaf springs are designed to replace the original multi-leaf spring set while featuring a precise...
1963-70 Chevy and GMC C10 Truck; Upper Control Arms; Pair
Reproduction upper control arms for 1963-70 Chevrolet and GMC truck models. These upper control arms are manufactured to original factory specifications from heavy gauge steel replicating the original in design and fitment....
Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for various GM models. This spacer is manufactured from durable EPDM rubber. This spacer was used to correct the ride height on vehicles that did not sit level...
1969-70 Chevrolet Impala Front End Rebuild Kit
1969-70 Chevrolet Impala nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each...
1967-69 Camaro; Firebird; Complete Front End Rebuild Kit
Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Each component is manufactured...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1968-74 Chevy II / Nova Front End Rebuild Kit; With Inner and Outer Tie Rod Ends
This kit includes a comprehensive assortment of front end parts designed to renew worn out front suspension components. Restore your handling and reduce front tire wear. This is an essential kit when upgrading your...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1965-70 Impala, Caprice, Bel Air; Upper Tubular Control Arms; Pair
These tubular control arms are designed for maximum strength and visual impact. These upper arms are designed for stock replacement. All arms capture both sides of the bushing, unlike the originals that were only retained on...
1967-69 Camaro; Front End Rebuild Kit; With Outer Tie Rod Ends Only
Nearly everything you need to fully rebuild a worn out front end. The kit includes a comprehensive assortment of front end parts designed to renew worn out original front suspension components. Be sure you install what the...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; LH Driver Side; Silver Weld-Thru Coating
Quality reproduction rear control arm for 1960-72 Chevrolet, GMC truck models with rear coil springs. This control arm is also known as a trailing arm. Installs to the rear axle housing and the center cross frame to support...
Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; LH, Driver Side; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center cross frame to support...
1960-72 Chevrolet, GMC Truck; Rear Control Arm; RH; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models with rear coil springs. This control arm, also known as trailing arm, installs to the rear axle housing and the center cross frame to support...
1967-69 Camaro, Firebird; Rear Shock Upper Mounting Plate; Pair
One of the most commonly rusted, damaged or accidentally discarded items in the rear suspension is this rear upper shock mount plate. This plate is mounted between the upper shock bushings and bolts to the factory weld nuts...
1970-72 Buick Skylark, GS 455, GS; Chassis & Suspension; Hardware Bolt Kit; OEM
This is a 129 piece kit it includes all the bolts needed to attach your suspension & steering to the frame for 1970-72 Buick Skylark, GS and GS 455 models. Includes brake line and fuel line "clamp bolts" as well as...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side
Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1963-87 Chevrolet/GMC Truck; Front Sway Bar; 1-1/4" Diameter
Replacement sway bar designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved vehicle handling and control. Offers all of the above without affecting your ride quality. Kit includes:...
Rear Shock Extension Fine Thread
Extends shock 2" allowing shocks to reach the shock mount on body. (For use on mono to multi-leaf conversions). 1 pair required
1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3-1/2"" U Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
Front sway bar for various 1964-81 Buick, Chevrolet, Pontiac, and Oldsmobile models with a 1-1/8" diameter bar. This sway bar is designed to minimize body roll, under-steer and over-steer when cornering, resulting in improved...
1968-69 Camaro / Firebird Mono To Multi Leaf Conversion Hardware Kit with 3" U Bolts & T Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
1963-72 Chevrolet/GMC Truck 1" Rear Sway Bar
Sway bar kit for Chevrolet/GMC truck, pickup and SUV models. 1" Sway bars reinforce the suspension, offering improved handling. Easy installation with basic hand tools. Each sway bar set includes proper bushings and mounting...
Reproduction disc brake spindle set for various 1967-69 Camaro, Firebird, 1968-74 Nova, X-Body, and 1964-72 Chevelle, A-Body models. Each brake spindle set is manufactured in forged steel replicating the original in design,...
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
1967-72 Chevrolet, GMC C10 Truck; Crossmember; Front; Original Style
Reproduction front crossmember for 1967-72 Chevrolet and GMC C10 pickup truck models. Each crossmember is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1967-69 Chevrolet, Pontiac; Rear Axle Pinion Rubber Bumper, Each
OER reproduction of the rear axle pinion bumper for 1967 Camaro/Firebird (2nd design), 1968-69 Camaro, Firebird models, and 1968-69 Chevy II / Nova models. Manufactured from quality molded rubber offering an original...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
1968-81 Rear Sway Bar/Anchor Plate Bolt - 7/16"-20 X 1-5/16"
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...
1964-69 Camaro, Nova, Firebird; Front Sway Bar Brackets; Pair
Reproduction of the original style U-shaped sway bar bushing clamps designed for use on various 1967-69 GM models. These factory correct reproductions are used to hold the inner sway bar bushings and the sway bar to the...
1963-96 Chevrolet/GMC 2 Wheel DriveTruck Lower Control Arm Shaft Kit
Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...
1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shaft; LH or RH
Quality reproduction of the lower control arm cross-shaft for use on various 1958-64 Chevrolet Impala, Bel Air, Biscayne, and 1963-82 Corvette models. Each control arm shaft is manufactured in quality stamped steel to...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova and X body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1967-69 Camaro, Firebird; Rear Shock Reinforcement Plate
Reproductions of the original rear shock mount reinforcement plate for 1967-69 Camaro and Firebird models. This die stamped, heavy steel plate mounts to the trunk floor and has features two threaded holes.Comes with black EDP...
1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers
Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...
1963-96 Chevrolet/GMC Truck; 2 Wheel Drive; Upper Control Arm Shaft Kit; with.640 Mounting Hole
Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...
1962-87 Buick, Chevrolet Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set
This rivet-style bolt set attaches the ball joint to the upper control arm, providing the appearance of a real rivet. A serrated locking rivet head prevents spinning when the nut is tightened. Includes eight Grade 8 rivet...
1963-72 Chevy, GMC Pickup; C10; C20; C30; Bracket Set; Front Sway Bar to Frame; Stock Height
These 1963-72 front sway bar to frame brackets are designed for a factory/stock height pickup. For trucks with air bag suspension we also recommend using stock height brackets. Sold as a pair to fit LH and RH side of the...
This lowered front sway bar bracket set will provide more ground clearance and is recommended for trucks lowered 3" or more. The brackets pull the bar up towards the frame to achieve additional ground clearance. For trucks...
1964-72 Various GM Vehicles Chevelle, GTO, Cutlass; Shim/Bolt Kit; Rear Sway/Stabilizer Bar
New OEM rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar bolt and shim kit for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. See vehicle fitment for all...
1968-69 Camaro / Firebird, 1968-79 Nova Multi Leaf Spring Pad Set
Each pad is used to insulate the area between the spring and the mounting plate. Two upper pads and two lower pads are required on vehicles with leaf springs. {fitment} Note: When converting 1967-69 single to multi leaf a...
1960-72 Chevrolet, GMC Truck; Single Coil Spring Retainer; Upper and Lower; Each
Reproduction of the original single coil spring retainer for use with 1960-72 Chevrolet and GMC model trucks. Each retainer cup is manufactured in stamped steel to original factory specifications featuring correct contours...
1969-82 Rear Stabilizer Bar Link; Upper Bracket GM#485336
Reproduction rear stabilizer/swaybar bar link upper bracket for 1969-81 Chevrolet Camaro, Pontiac Firebird and 1969-1970 Chevrolet Nova models. This is the upper bracket that mounts the rear stabilizer/sway bar link to the...
1964-72 Various GM Vehicles Cutlass, 442, Chevelle; Rear Suspension; Bumper; GM # 3996323
Brand new reproduction 1964-72 various GM models including Chevelle, 442, Cutlass rear suspension bumper. This bumper mounts on the rear of the frame to keep the bottoming out against the frame. This is the round style tip...
1967-69 Camaro, Firebird; Plastic Shock Cap; 4 Piece Set
Finally there's a quality reproduction of the often missing or broken shock cap. This cap is installed to cover the nut and threads to protect the threads from damage. Correct reproduction of the original injection molded...
1963-72 Chevy, GMC Pickup; C10; C20; C30; Bracket; Front Sway Bar to Frame; Stock Height
This 1963-72 front sway bar to frame bracket is designed for a factory/stock height pickup. For trucks with air bag suspension we also recommend using stock height brackets. Sold individually, fits LH or RH side of the...