1967-2004 Buick, Chevy, Oldsmobile, Pontiac; Accelerator Pedal; Various GM Models
1976-1976 Chevrolet Pickup Truck (C/K Series) (1st Design) 1971-1972 Chevrolet Blazer 1976-1976 Chevrolet Blazer (1st Design) 1979-1984 Chevrolet G10, G20, G30 Series Van 1979-1984 Chevrolet P10, P20, P30 Series Van...
1949-82 GM; Accelerator Rod Grommet and Sleeve Set ; Various Models
OER® reproduction of the original accelerator rod grommet and sleeve unit where the accelerator rod fits into the linkage. This grommet often deteriorates due to engine heat or chemical spillage. Replacing the grommet will...
This is an OER® reproduction of the original type tension spring that will enable your gas pedal pad to position itself properly. This spring attaches under the pedal pad and attaches to the rod assembly to keep the pedal...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Reproduction of the original fuel tank designed for use with 1969-1970 Chevrolet Impala, Bel Air, Biscayne, and Caprice models (except station wagon). This reproduction fuel tank is manufactured in quality stamped steel...
Replacement fuel tank for 1969-70 full-size passenger car models (except wagon). This fuel tank is made of stainless steel and has a capacity of 24 gallons (91 liters), measures 35" 37" x 4" and includes the fuel sender lock...
1969 Camaro, Firebird; Fuel Tank; with Fuel Neck; Stainless Steel; 18 Gallon Capacity
Correct reproduction of the original fuel tank designed for with 1969 Camaro and Firebird models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering originality with an...
1967-70 Chevy, GMC Pickup Truck; Fuel Tank Filler Neck Grommet; OER
OER reproduction fuel tank filler neck grommet for 1967-70 Chevrolet and GMC pickup truck models. Manufactured from durable rubber for years of use, this grommet secures the fuel filler neck at the cab. Manufactured in molded...
1967-72 Camaro, Nova, Firebird; Fuel Tank Sending Unit; 3/8"; with 1/4" Vent
Reproduction of the original fuel tank sending unit designed for use with 1967-68 Chevrolet Camaro and Firebird models with 3/8" line and 1/4" vent. After years of use, your fuel sending unit can stop working properly. When...
1967-69 Camaro, Firebird, 1967-72 Nova; Carburetor to Accelerator Cable; 6 Cylinder; OER
Reproduction accelerator cable for 1967 Camaro, Firebird (6 and 8 cyl), 1968-69 Camaro, Firebird (6 cyl), 1968-72 Nova (6 cyl) models. A faulty cable can lead to problems associated with acceleration and become a safety...
Accelerator Throttle Rod; Universal Fit
Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...
1967-71 Chevrolet, GMC Pickup Truck; Fuel Tank Sending Unit; 3/8"; V8; 327ci, 350ci
Reproduction of the original fuel tank sending unit designed for use with 1967-71 Chevrolet and GMC pickup truck models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that...
1967-72 Chevrolet, GMC Truck; Fuel Tank Relocate Kit; 20 Gallon; Side Fill
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail. This conversion will help eliminate gas fumes in the cab while adding the benefit of more interior storage space. Each conversion set...
1963-72 Chevy, GMC Pickup Truck; Fuel Tank Relocate Kit; 20-Gallon Capacity; Side Fill Style
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 20 gallon side fill fuel tank, fuel tank...
1968-69 Chevy II / Nova; Fuel Tank; 18 Gallon; Nitern Coated Steel
Correct reproduction of the original fuel tank designed for with 1968-69 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in Nitern coated steel. This is a 18 gallon fuel tank that replaces the...
1969-72 Blazer, Jimmy, Suburban; Fuel Tank; 20 Gallon; Zinc Coated
Reproduction fuel tank for 1969-72 Chevrolet Blazer and 1970-72 GMC Jimmy models. This tank is direct-fit for Blazer and Jimmy without any modifications required. Will also fit Suburban with slight modification of filler...
1969 Camaro / Firebird Fuel Tank Kit with 18 Gallon Zinc-Coated Tank
Replace all the necessary components for your 1969 Camaro or Firebird with OER® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes: Zin c-Coated...
1957-69 Buick, 1968-70 Chevrolet; Vented Gas Cap; with Markings
Reproduction GM gas cap that includes the correct "S" rivet and properly engraved markings. Manufactured and designed from the original OEM cap, the quality and materials are manufactured to exact specification with the "show...
1969-72 GM Truck; Fuel Tank Neck Grommet
OER reproduction gas tank filler grommet for various GM models including 1971-72 Chevrolt and GMC pickups and 1969-72 Blazer/Jimmy models. Each filler neck grommet is manufactured in molded rubber to replicate the original....
1967-70 Impala, Bel Air, Biscayne, Caprice; Fuel Sending Unit; 3/8"; 0-90 ohm
Reproduction fuel sender for 1967-70 Impala, Bel Air, Biscayne, and Caprice models except station wagon models. Each sender is produced in quality steel to resist corrosion within your fuel tank. Provides the fuel gauge with...
Reproduction fuel tank for 1969-70 Chevrolet Corvette models without EEC bracket on side. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion...
Reproduction fuel tank for 1969-70 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Features a 20.5...
1967-69 Camaro; Accelerator Pedal Assembly; with 6 Cyl. or Cross Ram Dual Carburators with 8 Cyl
Reproduction of the original accelerator assembly designed for use with 6 cylinder or 8 cylinder dual carburetor Cross Ram models. Extends from the firewall and comes with the accelerator pedal, pedal mount pin and spring,...
Reproduction fuel tank for 1968-69 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a 20...
Reproduction fuel tank for 1968-Early 1969 Chevrolet Corvette models. Each fuel tank is manufactured in quality stamped steel to original factory dimensions featuring a heavy zinc coating for corrosion resistance. Includes a...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1967-71 Chevrolet, GMC Pickup Truck; Fuel Tank Sending Unit; with 5/16" Line
Reproduction fuel tank sending unit for 1967-71 Chevrolet and GMC pickup truck models with 5/16" line. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your...
1967-70 Chevrolet/GMC Truck, Blazer. Suburban; Standard Accelerator Pedal Pad
Reproduction accelerator pedal pad for 1967-70 Chevrolet & GMC pickup. Blazer, Jimmy, and Suburban models with standard interiors. Each pad is manufactured in injection molded ABS material to original specifications and...
1969 Camaro; Accelerator Pedal Pad Assembly; V8; with Cowl Induction
This is the complete accelerator pedal assembly which extends from the firewall on all V8-equipped vehicles with cowl induction. This assembly comes complete with the accelerator pedal, pedal mount pin and spring, accelerator...
1968-69 Camaro Z28 Carb to Accelerator Lever Rod; 302 4 bbl
Reproduction accelerator pedal rod for 1968-69 Camaro Z/28 302 engines with 4 bbl carburetors. This rod is the essential link between the accelerator pedal lever and the carburetor. Each rod is manufactured to correct...
Reproduction of the original gas tank straps designed for use with 1967-1970 Chevrolet Impala, Bel Air, Biscayne, Caprice models (except station wagon). Each strap is manufactured in quality stainless steel with all correct...
1968-72 Chevy II Nova, Ventura; ; Fuel Tank Mounting Straps; EDP Coated Steel; Pair
Reproduction of the original style fuel tank mounting straps designed for use with 1968-72 Chevrolet Chevy II, Nova, and Pontiac Ventura models. Replace your original worn out gas tank straps with high quality reproductions....
1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, Tempest; Accelerator Pedal Assembly
Reproduction accelerator pedal assembly for 1968-69 Chevelle, El Camino, GTO, Skylark, LeMans, and Tempest models. Manufactured to factory specifications, this assembly includes the pedal pad, mounting arm, and firewall...
1969 Chevrolet Camaro; Accelerator Throttle Arm; V8; with Cowl Induction Hood
Reproduction of the original accelerator throttle arm designed for use with 1969 Chevrolet Camaro models that included a cowl induction hood. This is a correct reproduction of the original GM throttle lever arm. Manufactured...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1968-72 Camaro, Impala, Nova; Holley Throttle Cable Bracket
Reproduction of the original style Holley throttle cable bracket designed for use with various 1968-72 Chevrolet models. Each cable bracket is manufactured in stamped steel to original factory specifications making this...
1968-70 Camaro, Firebird, Nova, Impala; Fuel Tank Vent Valve
Reproduction of the original gas tank vent valve that's installed on various 1968-70 Buick, Chevrolet, Oldsmobile, and Pontiac models. Manufactured in injection molded plastic to factory specifications. This commonly damaged...
1968-69 Camaro, Nova; Accelerator Throttle Arm V8; 307ci, 350ci, 396ci; w/o Cowl Induction
Reproduction of the original throttle arm designed for use on 1968-69 Camaro and Nova models. Each throttle arm is produced to replicate the original in quality and fit. Replace your worn out or damaged original throttle arm...
1968-72 Chevrolet Chevelle, Malibu; Big Block; Quadrajet; Accelerator/Throttle Cable
Replacement accelerator/throttle cable for 1968-72 Chevrolet Chevelle and Malibu models. This cable is 23.5 inches long and is for big block applications. GM#'s 396454, 3972679. {specs} {fitment}
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Reduce heat coming off of the intake with this reproduction carburetor base gasket with heat shield, installs between the carburetor and intake manifold. This gasket and shield was original equipment for most 1970 Chevrolet...
Reproduction fuel tank mounting straps for 1967-72 Chevrolet and GMC Pickup truck, Blazer, Jimmy, and Suburban models. Each strap is manufactured in quality stamped steel. Comes with a black EDP Coating for rust and corrosion...
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1968-74 Chevrolet Corvette; Fuel Tank Mounting Straps; EDP Coated; Galvanized Steel; Pair
Reproduction fuel tank mounting straps for 1968-1974 Chevrolet Corvette models. Each strap is manufactured in stamped steel to original to factory specifications. Produced in zinc plated steel with a black EDP coating for...
1968-81 Corvette; Fuel Pump Return Hose
Replacement return hose for 1968-81 Corvette models. This 1/4" hose goes between the fuel pump and the tank.
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Reproduction of the original accelerator pedal trim plate designed for use on various GM models. Manufactured to exact factory dimensions, each trim plate is stamped in quality stainless steel offering a supurb appearance....
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1967-72 Camaro, Firbeird, Nova; Fuel Tank Strap Mounting Bolt Kit ; 10 Piece Set ; Various Models
Reproduction of the original mounting bolts and hardware designed to install fuel tank mounting straps on various GM models. It's easy to replace the fuel tank straps when you have the right hardware. This set includes the...
1967-69 Camaro, Firebird,1968-72 Nova; Fuel Tank Sending Unit; with 3/8" Single Line
Reproduction fuel tank sending unit for 1967-69 Camaro and Firebird models, and 1968-72 Nova models with 3/8" line. After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause your...
1969 Camaro / Firebird Fuel Tank Kit with 18 Gallon Stainless Steel Tank
Replace all the necessary components for your 1969 Camaro or Firebird with OER® fuel tank kit. Each kit provides the individual components needed to replace you leaking or damaged fuel tank. Kit includes: Sta inless Steel...
Correct reproduction of the original fuel tank designed for with 1968-69 Chevrolet Chevy II and Nova models. This reproduction fuel tank is manufactured in stainless steel and includes the fuel sender lock-ring and o-ring...
Reproduction of the original fuel tank designed for use with 1967-1972 Chevrolet and GMC pickup truck models. This reproduction fuel tank is manufactured in quality stamped steel featuring a Ni-Terne coating for superior rust...
Reproduction of the original style fuel tank designed for use with 1969-70 Impala, Bel Air, Biscayne passenger car models (except station wagon). This fuel tank is manufactured in zinc-coated stamped steel and has a capacity...
Reproduction of the original style fuel tank designed for use with various 1967-72 Chevrolet and GMC 1/2 ton pickup truck models not equipped with EEC (evaporative emissions controls) system. This fuel tank is manufactured in...
Reproduction of the original style fuel tank designed for use with 1968-70 Impala, Bel Air, Biscayne, Catalina, Bonneville station wagon models. This fuel tank is made of zinc-coated steel and has a capacity of 22 gallons (91...
1967-72 Chevrolet/GMC Truck; Fuel Tank Relocate Kit; With Top Fill; 17-Gallon Capacity
Relocate the fuel tank from inside the cab to underneath the truck on the frame rail to eliminate gas fumes inside the cab and add more interior storage space. Sets include: a new 17 gallon top fill fuel tank, fuel tank...
1969 Camaro, Firebird; Fuel Tank; with Neck; 18 Gallon; Zinc Coated Steel
Reproduction fuel tank for 1969 Camaro and Firebird models. This reproduction fuel tank is manufactured in zinc coated steel and includes the fuel sender lock-ring and o-ring gasket for a complete installation. This is a 18...
1969 Camaro, Firebird; Ni-terne Coated Fuel Tank; with Fuel Neck; 18 Gallon
Correct reproduction of the original fuel tank designed for with 1969 Camaro and Firebird models. This reproduction fuel tank is manufactured in original style Nitern coated steel and includes the fuel sender lock-ring and...