1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
FEATURED

Product#: 153981

1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair

Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....


Product#: 154077

1963-70 Chevrolet C10; Tubular Control Arm Set; Coil Over Type; Upper and Lower

Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to coil-over shocks. Each set includes upper and lower tubular control arms, and upper...


Product#: 153973

1963-70 Chevy and GMC Truck; Lower Control Arms; Pair

Tubular Replacement lower control arms for 1963-70 Chevrolet and GMC 1/2 Ton C10 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each...


Product#: 153970

1963-70 Chevy and GMC C10 Truck; Upper Control Arms; Pair

Reproduction upper control arms for 1963-70 Chevrolet and GMC truck models. These upper control arms are manufactured to original factory specifications from heavy gauge steel replicating the original in design and fitment....


Product#: 153980

1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair

Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...


Product#: T70586

1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side

Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...


Product#: 13168A

1963-96 Chevrolet/GMC 2 Wheel DriveTruck Lower Control Arm Shaft Kit

Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...


Product#: A1004

1958-64 Impala, Bel Air, Biscayne; Lower Control Arm Shaft; LH or RH

Quality reproduction of the lower control arm cross-shaft for use on various 1958-64 Chevrolet Impala, Bel Air, Biscayne, and 1963-82 Corvette models. Each control arm shaft is manufactured in quality stamped steel to...


Product#: 13184A

1963-96 Chevrolet/GMC Truck; 2 Wheel Drive; Upper Control Arm Shaft Kit; with.640 Mounting Hole

Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...


Product#: 3742247

1963-82 Corvette; Control Arm Bumper; Upper; Front

Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out. {fitment}


Product#: T70585

1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Drivers Side

Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...


1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control  Arm Assembly; Lower; LH Driver Side
NEW

Product#: SU5162A

1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; LH Driver Side

Reproduction lower control arm for use on a variety of 1964-72 GM A-Body models. Each control arm is manufactured in stamped steel to OE specifications for a precise fit and reliable performance. This complete assembly...


1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side
NEW

Product#: SU5163A

1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Lower; RH Passenger Side

Reproduction lower control arm for use on various 1964-72 GM A-Body models. Manufactured in stamped steel to OE factory specifications for a precise fit and reliable performance. Each assembly includes pre-installed round...


Product#: 13167A

1963-72 Chevrolet/GMC Truck; 2 Wheel Drive; Upper Control Arm Shaft Set

Reproduction control arm shaft kit, precision-engineered, and rigorously tested to provide a reliable replacement for the original equipment shaft. Direct replacement fits and functions exactly like the original equipment...


Product#: 3742252

1958-64 Impala; Bel Air; Biscayne; 1963-82 Corvette; Lower Control Arm Bumper

Replacing the control arm bumper can help bring the suspension back to factory original condition and keep it from bottoming out. {fitment}


Product#: SU4841A

1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; RH Passenger Side

Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...


Product#: SU4840A

1964-72 Chevrolet Chevelle, Malibu, El Camino; Front Control Arm Assembly; Upper; LH Driver Side

Reproduction upper control arm for various 1964-72 GM A-Body models including Chevelle, Malibu, El Camino, Monte Carlo, GTO, Lemans, Tempest, Cutlass, F85, 442, Skylark, Special, GS models. This reproduction upper control arm...


Product#: 384220

1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each

Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...


Product#: 12237

1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each

Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...


Product#: T677212

1963-72 Chevrolet, GMC; Blazer, Jimmy; Upper Control Arm Mount Bracket; 2WD; C10; Passenger Side

Reproduction bracket to mount the upper control arm to the frame on 2-wheel drive pickup, Blazer, and Jimmy models from 1963-72. This bracket is made from heavy-duty stamped steel just like the origiinal, and features the two...


Product#: 12238A

1965-70 Impala, Bel Air, Biscayne, Caprice; Lower Control Arm Bushing; Front; Each

Superb reproduction of the original control arm bushing reproduced to factory specifications. Add new life to your suspension by replacing the old bushings with these quality reproductions. Sold individually. 2 required per...


Product#: 99154G

1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair

Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...


Product#: 12162

1955-74 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bushing; Each; Various Models

1958-1970 Chevrolet Biscayne 1958-1970 Chevrolet Bel Air 1966-1970 Chevrolet Caprice 1970-1972 Chevrolet Monte Carlo 1968-1968 Chevrolet Chevy II 1968-1974 Chevrolet Nova 1955-1957 Chevrolet Bel Air 1955-1957 Chevrolet One...


Product#: 12258

1966-74 Camaro, Nova, Impala, Caprice; Lower Control Arm Bushing; Each

Reproduction of the original control arm bushing designed for the lower control arm on various 1966-74 GM F-body, B-body, and X-body models. Manufactured in steel clad rubber to be pressed into place. If your suspension...


Product#: 3928362

1968-72 Lower Control Arm Bumper ; Each

Reproduction of the original lower control arm bumper designed for use on various GM vehicles including 1968-69 Camaro and Firebird models. Each control arm bumper is manufactured in hard rubber featuring correct mounting...


Product#: 3939198

1962-70 Chevrolet; Pontiac; Control Arm Bumper; Rubber; Various Models

Reproduction of the original control arm bumper designed for use on various GM models. Each bumper is manufactured to factory specifications in the correct configuration and includes a built in stud ensuring a perfect fit....


Product#: T677211

1963-72 Chevy, GMC; Blazer, Jimmy C10 2WD; Upper Control Arm Mount Bracket; LH Driver Side

Reproduction bracket to mount the upper control arm to the frame on 2-wheel drive 1/2 ton pickup, Blazer, and Jimmy models from 1963-72. This bracket is made from heavy-duty stamped steel just like the origiinal, and features...


Product#: T677204

1963-91 Chevrolet, GMC C10 Truck, Blazer, Jimmy, Suburban; Engine Mount Crossmember; Control Arm Mount; 1/2 Ton, 2wd

Reproduction engine mount/control arm mount crossmember with factory style holes for connecting the LH and RH frame rails and mounting the engine and the control arms at the front of the frame. A good way to save a truck by...