Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
1969-87 Chevrolet, Pontiac; Door Hinge Repair Set; Except with 15mm OD Bushings
Reproduction of the original door hinge components for use on various GM models. Repair the broken door hinges with this comprehensive repair set. Each repair kit includes 4 properly hardened shoulder pivot pins and 8...
1965-70 Impala, Electra, LeSabre, Wildcat; Convertible Top Front Header Bow; Various Models
Reproduction of the original convertible top header bow designed for use with various 1965-70 Buick, Chevrolet, Pontiac, Oldsmobile, and Pontiac full size convertible models. Each header bow is manufactured in stamped steel...
1965-70 Impala/GM B-Body Convertible; Top Only; Pinpoint Vinyl; White
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
1967-70 Impala/GM B-Body Convertible; Rear Window Only; Glass; Without Zipper; Vinyl; Black
Reproduction convertible glass rear window, manufactured using high quality lightly tinted glass and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1965-70 Impala/GM B-Body Convertible; Top Only; Pinpoint Vinyl; Dark Blue
Reproduction convertible top, manufactured using heavy weight sateen backed Superior Pinpoint vinyl materials and original manufacturing techniques to assure you receive the best quality replacement top on the market! Seams...
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
Replacing your original damaged or missing back glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the windows of...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1967-70 Impala/GM B-Body Convertible; Rear Window Only; Glass; Without Zipper; Vinyl; Dark Blue
Reproduction convertible glass rear window, manufactured using high quality lightly tinted glass and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1965-70 Impala/GM B-Body Convertible; Rear Window Only; Plastic; Pinpoint Vinyl; Beige
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight sateen backed Superior Pinpoint vinyl materials to ensure longevity and durability. Original manufacturing...
1965-70 Impala/GM B-Body Convertible; Rear Window Only; Plastic; Stayfast Canvas Cloth; Black
Reproduction convertible plastic rear window, manufactured using high quality clear plastic and heavy weight Stayfast canvas cloth materials to ensure longevity and durability. Original manufacturing techniques assure that...
1965-70 Impala, GM Convertible; Rear Window Glass; Light Green Tint
Reproduction back window glass for various 1965-70 Buick, Cadillac, Chevy, Oldsmobile, and Pontiac Full Size convertible models. Each rear window glass is manufactured in tempered glass to factory specifications featuring...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction of the original convertible top cylinder designed for use with 1965-1970 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile full size convertible models. Each cylinder is manufactured from a solid aluminum...
Reproduction of the original front windshield glass for use with 1969-70 Buick, Chevy, Pontiac, Oldsmobile Full Size models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
1969 Impala, GM Full-Size; 2 Door Hardtop / Convertible; Front Door Glass; LH; Custom Gray Tinted
Reproduction door glass for various 1969 GM models. Manufactured to factory specifications featuring correct glass shape, and contours for proper fitment and appearance. Replaces NAGS # DD04147. Note: Shipped oversize....
1969-70 Full-Size Chevrolet 4 Door Sedan & Station Wagon Tinted Windshield Glass With Antenna
Replacing your original damaged or missing windshield glass will enhance your vehicle's appearance and safety by allowing you to see clearly. Don't settle for anything less than original quality glass when replacing the...
1964-72 Buick, Cadillac, Chevy, Pontiac, Oldsmobile; Convertible Top Latch Knuckle Hook; Each
Reproduction of the original latch knuckle hook designed for use with various GM convertible models. This component secures the convertible top to the upper windshield header, ensuring a proper seal and stable fit. Each...
Reproduction of the original front door glass window for use with various 1969 Buick, Chevrolet, Cadillac, Pontiac, and Oldsmobile full size passenger models. Each glass is manufactured to correct factory specifications...
Reproduction OEM accessory rubber trunk mat with Buick shields logo for 1961-77 Buick models including Skylark, Electra and Riviera. This is an auxiliary mat that goes on top of the felt covering. This is an officially...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1969-70 Impala, Caprice, Chevelle, Electra, Wildcat; Door Latch Assembly; 2 Door; LH Driver Side
Reproduction door latch assembly designed for use with 1969-70 GM B-Body 2-door models including Impala, Bel Air, and Biscayne. Each latch is manufactured to exact factory specifications, accurately replicating the original...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
Reproduction convertible top latch assembly for 1966-70 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile B-body and C-body convertible models. Manufactured to OE factory specifications, each latch accurately replicates the...
1969-70 Impala, Caprice, Chevelle, Electra, Wildcat; Door Latch Assembly; 2 Door; RH Passenger Side
Reproduction door latch assembly designed for use with 1969-70 GM B-Body 2-door models including Impala, Bel Air, and Biscayne. Each latch is manufactured to exact factory specifications, accurately replicating the original...
1959-76 GM; Convertible Top Boot Silde Rail Retainer; with 8 Mounitng Holes
Reproduction of the original style convertible top boot retainer for 1959-76 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models (except Camaro, Firebird). The top boot will slide into this retainer in order to hold...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1965-70 Impala, Electra, LeSabre, Bonneville, Catalina; Convertible Top Hold Down Cables; Pair; OER
Reproduction of the original convertible top hold down cables designed for use with 1965-70 Impala and GM Full Size convertible models. Each cable is made from quality materials replicating the original in appearance, design,...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1968-70 Buick Wildcat, Skylark, Electra, LeSabre; Windshield Washer Container; Bottle; Reservoir
Reproduction of the original windshield washer jar/bottle/container/reservoir thats produced and manufactured to original factory specifications for 1968-70 Buick Wildacat, Skylark, Electra, and LerSabre models. See vehicle...
Reproduction of the original convertible header bow guide pin designed for use with 1965-70 Buick, Chevrolet, Pontiac, and Oldsmobile B-Body full size models. These guide pins are crucial for proper alignment and secure...
1955-72 Buick, Chevy, Pontiac, Oldsmobile, Full Size; Convertible Top Hydraulic Pump Seal Set
Hydraulic pump seal set designed as a direct service replacement for use with various 1955-72 GM full size convertible models. This comprehensive set includes two large O-rings that seal each end of the reservoir (only one...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish
Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...
1969-70 Chevrolet, Buick, Oldsmobile, Pontiac; Convertible Top Cylinder Shoulder Bolts; Pair
Reproduction bumper jack storage mounts designed for use with 1955-57 Chevrolet full size models. These hard-to-find parts secure the bumper jack properly in the trunk, keeping it stable and in the correct factory location....
Reproduction convertible front tack strip for various 1959-76 GM convertible models. This is an essential item for anyone installing a new top on their convertible. This durable tack strip will effectively secure the new top...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
Reproduction of the original convertible top hinge bushings designed for use with various 1963-72 General Motors convertible models including 1967-69 Camaro and Firebird. Each set includes a pair of bushings that install...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...