Reproduction Hurst Competition Plus shifter assembly to fit and look like what was originally used in the 1967-72 Pontiac GTO, LeMans and 1967-70 Tempest models with 4-speed manual transmission. It features a chrome round bar...
1967-79 Firebird, Trans Am; Aluminum Bell Housing; 326, 350, 389, 400, 455; 8 Cyl.
Reproduction of the original aluminum bellhousing designed for use with 1965-79 Buick, Oldsmobile, and Pontiac models including Firebird and Trans Am models with 326, 350, 389, 400, and 455 8 cylinder engines. Will fit...
1953-1990 GM; Speedometer Cable; 55"; Thread-On; Various Models; OER
Reproduction of the original lower speedometer cable designed for use with various 1953-1990 GM models as listed. Each cable is designed and manufactured to replicate the original in functionality. This cable measures 55" in...
1968-72 Pontiac, 1973-81 Camaro, 1970-81 Firebird; Transmission Shift Cable; Auto Trans; w/Console
Reproduction of the original shift cable designed for use with 1973-81 Camaro and 1970-81 Firebird, 1968-72 Tempest, LeMans, GTO, Grand Am, Catalina, Bonneville, and Grand Prix models with automatic transmissions. Each cable...
1967-68 Skylark, Cutlass, GTO, Grand Prix; Hurst 4-Speed Manual Transmission; Shift Rods/Tabs Set
reproduction Hurst shifter rod & tab setup with metal bushings and clip kit for 1967-68 Pontiac GTO, LeMans, Tempest, Oldsmobile Cutlass and Buick Skylark models with a 4-speed manual transmission. These are 3/8? diameter...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
1964-77 Olds, 64-79 Pontiac; Clutch Cover; Manual Trans
Reproduction of the original clutch inspection cover designed for use with various 1964-79 Pontiac and Oldsmobile models including Firebird, Trans Am, GTO, LeMans, Tempest, 442, Cutlass, F85 models and more. Each cover is...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
1968-72 Pontiac GTO, LeMans; Swivel Assembly; Clutch Cross Shaft; Z-Bar
New factory reproduction cross counter shaft swivel assembly. This swivel assembly fits Pontiac GTO and LeMans. It Mounts on the motor side of the cross shaft. Must order the cross shaft to make a complete assembly.
1964-81 Pontiac; Transmission Torque Converter Cover; TH350, TH400; For Starter on LH Driver Side
Reproduction of the original transmission torque convertor cover designed for use with various Pontiac models with 301, 350P, 350W, 400, 455, 4.3S, 4.9T with TH350 or TH400 automatic transmissions. Each cover is manufactured...
Reproduction shift control cable for 1968-69 Chevelle, El Camino with automatic transmission and a Yenko shifter and 1968-69 Cutlass, 1967-68 GTO, LeMans and Tempest with Dual Gate shifter. The cable is an identical...
Kickdown Cable; with TH350 Trans; Stainless Braided; 55" long
Stainless steel transmission kick-down cable that fits TH350 transmissions with carburetor kick-down cable. Designed for 4 barrel-type carburetors and small block Chevrolet engines. Includes extender for more versatility in...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
1968-72 Pontiac GTO, LeMans; Clutch Bell Crank; Cross Shaft; Z-Bar
New bell crank (z bar) for cars with manual transmission. It's what the cross shaft, clutch push rod and pedal assembly attaches to. The pivot point that allows the clutch pedal to depress the clutch. Made of welded steel....
1964-72 Pontiac; Brake and Clutch Pedal Trim Plate; with Manual Trans; Various Models
Correct reproduction of the original brake or clutch pedal pad trim plate for use on various 1965-72 Pontiac models. Each trim plate is manufactured in polished stainless steel to exact factory dimensions and features the...
1967-79 GM; Transmission Dipstick; TH350 Auto Trans; 27-1/8" Long; Various Models
Reproduction of the original turbo 350 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with...
Reproduction of the steering column lower arm lockout rod grommet/bushing with plastic insert for multiple GM vehicles. GM#'s 1394293 bushing - 22503153 insert. The bushing measures.410" ID x.640 OD. Nylon insert...
1962-83 Buick, Chevy, GMC, Olds, Pontiac; Speedometer Cable; 73" Long; Thread-On
Quality reproduction of the original speedometer cable designed for use with various 1962-83 Buick, Chevrolet, Oldsmobile, and Pontiac models. This complete speedometer cable assembly is manufactured to correct factory...
1964-72 Pontiac GTO, Lemans, Buick Skylark, Hard Top Models; Transmission Crossmember; 55"
Replacement transmission crossmember for automatic or manual transmissions for various 1964-72 GM applications including Skylark, and GTO hard top models. This style of crossmember uses rubber pads that bolts to the frame. It...
Replacement transmission crossmember for automatic or manual transmissions for various 1968-72 GM applications including Monte Carlo, Skylark, and GTO convertible models. This style of crossmember uses rubber pads that bolts...
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1968-69 GTO, Cutlass, 442, Chevelle; Automatic Transmission; Hurst Dual Gate Shifter; Cable
Reproduction 1968-69 Cutlass, GTO, LeMans, El Camino with TH-350 or TH-400 automatic transmission and Hurst Dual Gate shifter cable. The cable measures 53" center to center eyelets and 39" from the bracket on the trans...
1967-81 Firebird, Trans Am; Clutch Fork; Various GM Models
Reproduction of the original clutch fork designed for use with various 1964-74 Buick, Oldsmobile, and 1964-81 Pontiac and Firebird V8 models. This clutch fork is manufactured in the correct configuration and features the...
Replacement transmission crossmember brackets for various 1964-72 GM models including LeMans, Cutlass, and Skylark models. These are the bracket that mount the transmission crossmember to the frame on each end. See vehicle...
Reproduction shift knob chrome "T" handle with black inlay for various 1968 Pontiac models including GTO, Grand Prix and LeMans. This handle is manufactured to factory specifications. Injection molded manufacturing process...
1968-72 Pontiac GTO; Upper Clutch Rod; Pedal To Z Bar
Reproduction of the correct clutch rod for 1968-72 Pontiac GTO Upper clutch rod pedal to Z Bar they are 100% correct. These are hardened steel with correct offset. These rods go from the Z bar to the clutch pedal. They...
1964-79 GM; Transmission Dipstick; TH400 Auto Trans; 24-1/8" Long; Various Models
Reproduction of the original TH400 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with obsessive...
Cast aluminum Hurst 4 speed shifter mounting plate/bracket for 1967-72 Pontiac GTO, LeMans, 1967-70 Tempest, 1969-72 Pontiac Grand Prix and 1967-72 Oldsmobile Cutlass models. This reproduction shifter bracket allows the...
1968-72 GTO, LeMans, Tempest; Automatic Transmission Floor Shifter; Button
Reproduction shift knob button for 1968-72 GTO, LeMans and 1968-70 Tempest models. It features the PMD logo with and injection molded plastic base. This is the button that must be pushed in before you can change out of park....
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
1968-72 Pontiac GTO, LeMans; Anti Rub Clip/Clamp; Transmission Cooler Lines; Each
This plastic protector is used to keep the transmission lines from rubbing against the frame and causing a hole in the line. They are manufactured for 1968-72 Pontiac GTO and LeMans models. These are very rare since they are...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch & brake pedal assembly for various GM applications including Pontiac GTO, Oldsmobile 442, and Buick Skylark. These perfectly constructed brake and clutch pedal assemblies are a bolt in style manufactured...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1966-72 Pontiac, 1968-69 Firebird,1969 Camaro; Hurst Floor Shift Boot; 3 or 4 Speed; Manual Trans
Reproduction of the original shift boot designed for use with 1969 Camaro and 1968-69 Firebird models with 4 speed Hurst shifters. Each shift boot is designed and manufqactured in quality EDPM rubber that matches the original...
Reproduction of the original Hurst-type shift boot retainer plate installed on various GM models including 1969 Chevrolet Camaro models equipped with 4-speed Hurst shifters. Works with both original and reproduction Hurst...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...