OER reproduction of the original 1968 Plymouth GTX and Sport Satellite grill assembly faithfully reproduced in gray injection molded ABS, and authentically finished in correct argent silver grill paint with satin black...
1968 Plymouth GTX, Sport Satellite; Rear Trunk Trim Panel; Dark Argent Silver; Die-Cast Reproduction
Reproduction die-cast trunk trim panel for 1968 Plymouth GTX or Sport Satellite models. This authentic reproduction installs on the trunk lid between the tail lamps, restoring the factory appearance and fit. The panel...
1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each
Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...
Reproduction of the original rear body panel trim finish panel molding designed for use with 1968 Road Runner and Satellite models. Each rear trunk panel molding is manufactured in quality die-cast zinc replicating the...
1968-70 Plymouth B-Body Rocker Panel Moldings
These factory-style replacement rocker panel moldings mount underneath each door and run from the front fender to the rear quarter panel. Made in USA. Each molding features proper finish and contours to correctly replace the...
1968-70 Dodge, Plymouth; B-Body; Roof Drip Rail Molding Set; 6 Piece Set
Reproduction roof drip rail moldings for 1968-70 Dodge and Plymouth B-Body models. Each molding is manufactured in quality stainless steel to original factory dimensions for an authentic appearance and fit. Moldings run up...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set
Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...
1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces
Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...
Factory-style reproduction front windshield molding lower clip and rear window clip for 1968-70 Dodge Charger, Coronet, Super Bee, and Plymouth Road Runner, Satellite, and GTX models. Each molding clip is designed to attach...
1968 Plymouth Satellite Rivet Head Bolt with Nut; Set of 25; Black
Grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and bolt when installing the grill...
Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...
1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack
Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1959-68 Chevrolet; Grill Attaching Rivet with Nut; Silver Zinc Plating
Reproduction of the original style grill rivet and nut designed for use with various 1959-68 GM applications where a rivet was originally required to install the grill. Each rivet is designed to offer an authentic appearance...
1968 Plymouth; Belvedere, GTX, Sport Satellite; Center Front Grill; Gray
OER reproduction of the 1968 Plymouth Sport Satellite/GTX grill center faithfully reproduced in gray injection molded plastic, and authentically finished in the correct argent silver grill paint with satin black accents as...
American made reproduction wheel opening moldings for 1968-70 Plymouth B Body models (Except 1969 GTX). Each molding is manufactured in quality stamped aluminum featuring correct contours for an authentic appearance and...
1968 Plymouth GTX; Grill Moldings; Upper And Lower; 2 Piece Set
Factory-style reproduction of the original grill moldings designed for use with 1968 Plymouth GTX models. Includes both the upper and lower center moldings that feature the correct contours and bright finish to correctly...
Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...
1969-70 Dodge, Plymouth B-Body; Rear Window Molding Clip Set; 2 Door Hardtop, Coupe; 21-Piece Set
Factory-style back glass molding clip set for 1969-70 Dodge, Plymouth B-Body models (except Charger). This complete molding clip set is used to attach the back glass moldings around the rear window. Each set includes 21 clips...
Factory-style reproduction front windshield molding clip set for 1968-70 Dodge Charger, Coronet, Super Bee, and Plymouth Road Runner, Satellite, and GTX models. Each molding clip set includes a total of 24 clips and phillips...
1959-1967 Grill Installation Rivet Head Bolt with Nut; Set of 25; Silver ; Various Models
Reproduction of th eoriginal grill installation hardware designed to install grill assemblies on various models. These unique carriage bolts are designed with the original appearance of a rivet, but will work like a nut and...
1968-70 Dodge, Plymouth; B-Body; Roof Drip Rail Corner Molding Set; Pair
Reproduction roof drip rail molding corners for 1968-70 Dodge and Plymouth B-Body models. Each molding set is manufactured in quality stainless steel to original factory dimensions for an authentic appearance and fit. Two...
1971-72 Charger Grill Flat Nut ; Push On Type, Round ; Fits 1/8" Stud Size ; Set of 36
Reproduction of the circlips/lock washer nuts for a 1/8" stud used to attach varios Mopar grills and other items. Each lock washer nut is replicated to exact factory specs. Manufactured to fit and function as original....
These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...
Factory-style reproduction windshield molding upper and side clip for 1968-70 Dodge Charger, Coronet, Super Bee, and Plymouth Road Runner, Satellite, and GTX models and rear window clip for 1968-69 Plymouth Barracuda. Each...
Premier reproduction front windshield molding clip for 1966-1967 Charger, Coronet, Belvedere, and Satellite 2 door coupe and convertible models (also fits some early 1968 models on the lower portion of the windshield...
Nylon Tail Molding Clip; 1/2" Long, White Nylon; Requires #8 Tapping Screw
Tailgate molding clips for 1966-67 Chevrolet Full Size Wagon and Chevrolet Malibu, Chevelle Wagon models, and El Camino. Nylon clip replaces original GM part number 4490167. Sold individually.
Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Molding Clip Stud Screw; #4 x 3/8" with 1/8" Shoulder; Zinc Plated
Replacement mounting screw for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be missing....
1968 Plymouth; Belvedere, Road Runner, Satellite, GTX; Headlamp Bezel Set
Reproduction of the LH & RH headlamp bezel set for 1968 Belvedere, Road Runner, Satellite, Sport Satellite, GTX models. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion...
1968 Plymouth; Belvedere, Road Runner, Satellite, GTX; Headlamp Bezel; LH Driver Side
Reproduction of the LH headlamp bezel for 1968 Belvedere, Road Runner, Satellite, Sport Satellite, GTX modelsl. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion...
Phillips Head 8-18 x 3/8" Molding Screw; 9/32" Diameter Washer Head; Silver Zinc-Plated
Retaining screws for installation of moldings or other trim that requires a 9/32" diameter round washer head phillips screw. Each zinc treated screw measures 8-18 x 3/8". These screws can also be used on various GM, Ford and...
1958-68 Chevrolet; Various Models; Front Grill Rivet Bolt And Nut; Black
Reproduction grill rivet & nut for various 1958-1968 Chevrolet models. This rivet is used to mount the grill assembly. Rivet and nut is manufactured to replicate the appearance of the original rivet with the convenience of a...
U-Nut; #8 Screw Size; Panel Clip; Phosphate; Each
Spring type U-Nut produced in spring steel with a black phosphate finish. This # 8 Screw Size Panel Clip fits a panel range of.025" to.125" and the measurement of the center of the hole to the edge of the clip is 3/8". Used...
1968 Plymouth Satellite Sport & GTX; Headlamp Bezel; RH Passenger Side
Reproduction of the RH headlamp bezel for 1968 Belvedere, Road Runner, Satellite, Sport Satellite, GTX modelsl. Manufactured from die-stamped aluminum then polished to a high luster and clear anodized for corrosion...
1968-76 Dodge, Plymouth, 1964-68 Ford; Front Windshield Molding Clip Set; 12 Pieces
Reproduction windshield molding clips for a variety of classic Amercian car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang models. These clips are push on style that...
1968-69 Barracuda, Road Runner, Satellite; Trunk Trim Panel Molding Hardware Set
Reproduction of the original style mounting hardware designed to install rear trunk trim panel molding on 1968-69 Mopar B-Body models. The rear trim panel molding installs on rear body panel between tail lamps. Includes trim...
Molding Clip Stud Screw Set; #4 x 3/8" with 1/8" Shoulder; Zinc Plated; Package of 10
Replacement mounting screw set for attaching molding clips to the body, Commonly used for: door ledge, window reveal, rocker panel and quarter panel molding retainers. Also used to replace welded stud posts that might be...
Hex Head Bolt; 1/4-20 X 7/8; Sems; With Dog Point; Each
Correct hex head SEMS bolt with dog point used on various GM, Ford and Chrysler vehicles including for use on 1968-74 Mopar A and B-Body interior door handles, and 1972-73 Ford Mustang grill among other uses. This part is...
Tapping Screw; Phillips Flat Washer Head; #8 x 3/4"; Black; Each
Replacement Phillips flat top washer head tapping screw used on various GM vehicles. Each screw is a #8 x 3/4" long Pillips flat top washer head with a black E-coat. Quantities vary by model. Use as needed. Can be used with...
Push Pin Retainer; 5/8" Diameter Head; For 1/4" Hole; Each
Reproduction push-pin style retainer for various Ford models including 1970 Mustang models to fit the grill to the headlamp bracket among other uses. Use wherever a 5/8" head diameter push-pin type fastener is required. Fits...
Speed Nut 1/4" X 7/8" Dia. X 11/16" O.D.; Pair
Replacement molding clip retaining speed / pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing...
1968 Plymouth; Sport Satellite/GTX; Grill Set; With Headlamp Bezels
OER reproduction of the 1968 Plymouth Sport Satellite/GTX grill center and headlamp bezels faithfully reproduced in gray injection molded plastic, and authentically finished in the correct argent silver grill paint with satin...
#8 x 3/4" Phillips Head Tapping Screw; Black Oxide; #6 Head
Replacement black trim screw for use on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with this quality reproduction of the original black phillips head...
All Purpose Plastic Nut, # 8 Screw Size, Fits 5/16" Square Hole, Panel Range 1/16" - 5/32"
Attachment nut for Headlamp Bezels, Grill or Side Marker. For # 8 Screw Size, 5/16" Square hole, Panel Range 1/16" - 5/32" Sold individually. Buick Applications: 1976-82 Century Headlamp Bezel Nut 1976-81 Century Grill Nut...
1968 Plymouth Sport Satellite, GTX; Grill Surround and Molding Assembly
OER reproduction of the 1968 Plymouth Sport Satellite/GTX grill surround and molding assembly. Each grill surround is faithfully reproduced in stamped steel with extruded aluminum moldings riveted on as original. Note: Coming...
Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 8 Piece Set
Retaining screws for installation of moldings or other trim that require a 9/32" diameter round washer head #8-18 phillips screw. Each zinc-plated screw measures 3/8" long. Each set includes 8-pieces which is enough for the...
Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8
Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head
Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...
1968-69 Plymouth B-Body; Lower Grill Panel; EDP Coated
Reproduction of the original front lower grill panel designed to replace the original on 1968-69 Dodge and Plymouth B-Body models. Each panel is manufactured in stamped steel replicating the original in design, appearance and...