Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-72 Chrysler, Plymouth, Dodge; Mopar Pentastar Front Fender Emblem; Silver; RH
Reproduction of the original fender Pentastar emblem designed for various 1967-72 Mopar models. Each emblem is manufactured like the original two piece Mopar design featuring a metal cover plate attached to a plastic backing....
1967-69 Plymouth Belvedere; "Hemi" Trunk Lid Emblem; Each
Reproduction of the original "Hemi" emblem designed for the rear deck lid for 1967-69 Plymouth Belvedere models. Each emblem is designed and manufactured in zinc die-cast metal to exact specifications including correct...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-72 Chrysler, Plymouth, Dodge; Mopar Pentastar Front Fender Emblem; Gold; RH
Reproduction of the original fender Pentastar emblem designed for various 1967-72 Mopar models. Each emblem is manufactured like the original two piece Mopar design featuring a metal cover plate attached to a plastic backing....
1966-70 Dodge, Plymouth; V-8 Emblem; For Front Fender
Authentic reproduction die-cast V-8 fender emblem for a wide variety of Dodge and Plymouth A-Body, B-Body, and E-Body models. Each emblem is produced to factory original specifications featuring the correct silver finish with...
"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"
This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1968-69 Barracuda, Valiant, Fury, Belvedere; Rocket Horn Cap Emblem; Mopar Licensed
Reproduction of the original Plymouth 'Rocket" horn cap emblem designed for use with 1968 Plymouth Barracuda, and 1968-69 Valiant, Belvedere and Fury models. Each horn button cap is manufactured correctly from injection...
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
1966-71 Plymouth; "Plymouth" Hood or Trunk Emblem Set; 8 Letter Set; Mopar Licensed
Reproduction of the individual letters that spell "P-L-Y-M-O-U-T-H" designed for 1966-71 models. This emblem is located on the hood or the trunk of 1966-71 PLYMOUTH models. Each letter is a die-cast replication of the...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Authentic reproduction of the original "Plymouth" emblem for various 1968-72 Plymouth models. Each emblem is manufactured in die-cast zinc metal to exact specifications featuring the correct brushed chrome face with black...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...