Product#: SA20

Universal HIDE-A-WAY Antenna AM/FM; OER Amplified Electronic

If you want great reception without a visible antenna, then the OER® Authorized Hide-a-Way amplified electronic antenna may be just what you need! A major breakthrough in antenna science, the OER® Authorized...


Product#: 402254

1967-1969 Oldsmobile Cutlass, 442, F85; Front Fender Antenna Body and Cable

1967-1969 Oldsmobile Cutlass, 442, F85 front fender antenna body and cable cable. Replaces GM part# 402254 {specs} {fitment}


Product#: 7307181

1964-72 GM; Oval Front Dash Speaker; 4" x 10"; Four Bolt; 8 - 10 Ohms; Each

Reproduction 4" x 10" Oval 8-10 Ohm factory front dash speaker for various 1964-72 GM models. Each speaker is manufactured to original specifications featuring a cosmetically correct rectangular magnet and 4 bolt design for...


Product#: RD1004T

1968-69 Oldsmobile Cutlass, 442; Radio Bezel; Black W/Chrome Accent

Metal die cast radio bezel for 1968-69 Oldsmobile Cutlass and 442 models. This bezel black with chrome accented highlights. It is just what is needed to renew the stereo section for Oldsmobile Cutlass and 442 models dash...


Product#: 14777

1964-81 Buick, Chevy, Olds, Pontiac; Rear Seat Shelf Speaker Mounting Studs; 4 Piece Set

Reproduction of the original style rear seat shelf speaker mounting studs for use with various 1964-81 GM coupe and hardtop models. These studs have the correct spring clips used to keep tension on the stud when attached to...


Product#: RD6480Z

1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth; 6"x9" Rear Speaker Grille; With 4 Mounting Studs

Reproduction rear speaker grille for various GM, Ford, and Chrysler models including 1964-80 Buick, Chevrolet, Oldsmobile, Pontiac, Ford, Dodge, Plymouth. Fits Chevelle, Malibu, Impala, Caprice and Nova among other models....


Product#: RD2308T

1968 Oldsmobile Cutlass, 442, F85; Outer Radio Knobs; Chrome with Black Stripe

1968 Oldsmobile Cutlass, 442, F85 outer radio knobs. These new chrome knobs have a black stripe. You can now replace the missing or damaged radio knobs. Sold by the pair. {specs} {fitment}


Product#: RD9550T

1968-72 Oldsmobile Cutlass, 442; 8-Track Player; Inner Knob

Reproductions under dash 8-Track player die-cast inner knobs. They are identical to the originals that GM produced for 1968-72 Oldsmobile Cutlass and 1969-71 Oldsmobile 442 models. These have the correct ribbed edges. Sold...


Product#: RD2641T

1968-69 Oldsmobile Cutlass, 442, Cutlass Supreme; Antenna Tip

Reproduction OE antenna mast tip for 1968-69 Oldsmobile Cutlass, Cutlass Supreme and 442 models. This is the screw on hexagon shaped tip for the fender mounted radio antenna. Add this finishing touch to the restoration....


Product#: RD3717T

1967-69 Oldsmobile Cutlass, 442; Bezel; Nut; Fender Mounted Antenna

New reproduction radio antenna bezel/nut for 1967-69 Oldsmobile Cutlass and 442 models. This if for fender a mounted antenna. It is both the bezel and nut and is threaded on the inside to mount the antenna also. {specs}...


Product#: 88891017

OER Universal Fit; Power Antenna Assembly; with Bulkhead Connector

Universal-fit, service replacement antenna for classic or late model vehicles with power antenna option. Each motor is mounted directly to the mast assembly and is designed to mount with the universal-fit bracket and 160 inch...


Product#: RD4631T

1968-72 Oldsmobile Cutlass; 8 Track Housing; W/Bracket

Reproduction of the correct 8-track plastic housing for 68-72 Oldsmobile Cutlass and 442 models. Fits under the dash, this housing comes complete with the mounting brackets. Looks and functions 100% like GM with correct...


Product#: 3961598

1970 Chevrolet; Rear Speaker Grille; with 4 Mounting Studs; Various Models

Reproduction rear speaker grille for various GMmodels. Correct for 1970 Chevelle, Nova, Impala, Caprice and Monte Carlo. This speaker grill features straight sides and four built-in studs like the original. This is a...


Product#: 154928

5-1/2" Coaxial Premium Kick Panel Speakers; with Grills; 100 Watts; 90-13KHZ Frequency Response; Pair

Our Premium 5-1/2" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 100 watts peak power capacity and a frequency response of 90-13KHZ. Ultra thin design makes this...


Product#: 154927

Premium Coaxial Kick Panel Speakers; 4"; 70 Watts Peak Power; Pair

Our Premium 4" round coaxial stereo speakers provide the ultimate audio quality in your classic car or truck. Speakers have 70 watts peak power capacity and a frequency response of 100-13 KHZ. 2" deep design makes this...


Product#: 1224267

1962-77 GM Car, Truck; Front Dash Speaker; 4" x 10"; 8 -10 Ohms; Authentic Reproduction

Reproduction 4" x 10" rectangular factory style front dash speaker for various 1962-77 GM models. The GM factory began using this style of speaker in 1962. By 1968 this speaker design was commonly found in almost all GM...


Product#: 7933362

1958-83 GM; Front In Dash / Rear Seat Shelf Speaker; 6" x 9"; 8-10 Ohms; Each

Reproduction 6" x 9" factory style 8-10 Ohm speaker for various 1958-83 GM models. This is an exact replica of the speaker installed by the GM factory in the dash and/or beneath the rear seat shelf, manufactured to original...


Product#: 16033662

1965-1993 GM; Kick Panel or Dash Speaker; 4" x 6"; 8-10 Ohms; Authentic Reproduction; Vehicles with 4-Speaker Stereo System; Each

Reproduction of the original 4" x 6" front kick panel speaker and in-dash speaker for various 1965-93 GM models with a factory 4-speaker stereo system that requires a 8-10 OHM speaker. Each speaker is manufactured to the...


Product#: RD3718T

1968-69 Oldsmobile Cutlass, 442; Radio Delete Plate

Factory style reproduction radio delete plate for applications that were ordered without radio fort 1968-69 Oldsmobile Cutlass and 442 models. This plate is made from injection-molded ABS plastic for maximum durability. Sold...


Product#: KW107

Radio Installation Nuts; 7/16"-28 thread x 1/8" thick; Pair

Correct mounting nuts used to hold the radio in place on most GM applications. Fits radios that use 7/16"-28 thread x 1/8" thick flat style hex nuts.