Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long
This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...
Correct reproduction of the original fuel tank designed for with 1964-1968 Ford Mustang, and 1967-1968 Cougar models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering...
1960-68 Mustang, Falcon, Comet; Fuel Tank Sending Unit; w/o Low Fuel Warning; 3/8" Pipe; Zinc Plated
The most accurate reproduction fuel tank sending unit in the industry. Features the original design including a brass float, O ring, and filter that replicate the original in appearance and functionality. This unit monitors...
1967-68 Ford Mustang; Niterne Gas Tank Kit; With 5/16" Fuel Sending Unit; Without Drain Plug
OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...
1964-68 Mustang, Cougar; NiTerne Coated Fuel Tank; w/o Drain Plug; OER; F28E; 16 Gallon Capacity
OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each fuel tank is manufactured in quality stamped steel featuring a Niterne coating for superior...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps
Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...
1964-68 Mustang, Cougar; Zinc Coated Fuel Tank; 16 Gallon; w/o Drain Plug; OER; F28E
OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a Zinc coating for rust and corrosion...
1964-68 Ford Mustang; Fuel Tank Sending Unit; without Low Fuel Warning; 5/16"
Reproduction fuel tank sending unit for 1964-68 Ford Mustangs and other various models. The most accurate reproduction fuel tank sending unit in the industry, with original design brass float and filter. This unit monitors...
1964-68 Mustang, Cougar; Accelerator Linkage; V8 with Automatic Transmission
Reproduction of the original accelerator linkage designed for use with 1966-68 V8 Mustangs or 1967-68 V8 Cougar equipped with automatic transmission. This linkage connects your accelerator pedal to the accelerator rod. Mounts...
1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models
Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...
Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...
1967-68 Ford Mustang; Fuel Tank Filler Neck
Reproduction fuel filler neck for 1967-68 Mustang. This filler neck is manufactured to factory specifications and replaces the original exacty. Will mount to the tail light panel and connects the filler hose to the fuel tank....
Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black
This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length
Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...
Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length
Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....
Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.
Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...
1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"
Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...
Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps
Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...
1964-68 Mustang, 1967-68 Cougar; Fuel Tank; 16 Gallon; Stainless Steel; w/o Drain Plug; F28E
Specifications Superior Corrosion Resistance Polished Stainless Steel Tank Size: 16 Gallon (61 Liter) Lock Ring and O-ring Gasket Kit Included Fuel Sender Not Included (Sold Separately) Filler Neck Not Included (Sold...
1967-68 Ford Mustang; Gas Tank Kit; 22 Gallon Conversion, Niterne; 3/8" Fuel Sender; With Drain Plug
Our 22 Gallon Niterne steel Fuel Tank Conversion Kit comes with everything you need to upgrade from the 16 gallon fuel tank in your 1967-68 Mustang, to a larger capacity 22 gallon fuel tank. Each 22 gallon gas tank conversion...
1967-68 Ford Mustang; Niterne Gas Tank Kit; With 5/16" Fuel Sending Unit; With Drain Plug
OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...
1964-68 Mustang, Cougar; NiTerne Coated Fuel Tank; 16 Gallon; with Drain Plug; F28A
OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a NiTerne coating for rust and...
1964-68 Mustang, Cougar; Zinc Plated Fuel Tank; 16 Gallon; with Drain Plug; F28A
OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a galvanized zinc coating for rust and...
Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap
Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...
1967-70 Ford Mustang; Rubber Filler Neck Hose; Fuel Tank to Filler Pipe; 4-7/8" Long; 2-3/16" id
Reproduction fuel filler hose that seals the inlet filler neck to the fuel tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 100 GPH - 7 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
Electric Fuel Pump; with Yellow Zinc Plated Housing; 140 GPH - 9 PSI
This externally-mounted electric fuel pump is ideal for most street and strip applications. Proven rotary vein technology provides high flow and stable pressures with minimal vibration and sound. Each pump features 3/8" NPT...
1965-73 Ford Mustang; Screw Set; Gas Tank Mounting; 13 Piece Set
This 13 piece set contains all the mounting hardware needed to install your gas fuel tank. Each piece is factory correct. Screws and bolts are all fabricated from heavy-duty steel and coated to prevent any corrosion. Ford...
1964-70 Ford/Mercury; Wire Clamps; For Fuel Filler Neck Hose
Reproduction wire-style fuel tank filler neck clamps for 1964-70 Mustang, 1967-70 Cougar and 1966-70 Fairlane models. If your hose is loose, the filler neck clamps could be worn out and require replacing. These clamps are...
1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim
Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part # C5ZZ-9735-D. Ford...
1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit
Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...
Stainless steel reproduction of the fuel tank sending unit featuring the original design with a brass float, O-ring, and filter that replicate the original in appearance and functionality. This unit monitors the fuel level in...
Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...
1964-69 Ford Mustang; Hex Head Screw Set; For Fuel Filler Neck; 5 Piece Set
Reproduction fuel filler neck screw kit. Each 5 piece screw kit includes the hex head screws that are required to mount the fuel filler neck to the tail lamp panel on 1964-69 Mustang models. #10 x 1/2" Lg Tapping Screw with...
1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models
Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...
1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style
Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...
1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302
Reproduction of the original accelerator rod set designed for use with 1964-67 Mustang models. Each rod is manufactured to factory specifications for proper fitment and function. For use with 260, 289, 302 engines. {fitment}
Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors
Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...
Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each
Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...
1964-73 Ford/Mercury; Fuel Tank Filler Pipe Neck To Body Gasket
Reproduction of the original gas tank filler neck gasket for 1964-73 Mustang and 1967-68 Cougar models. The fuel tank-to-body gasket will ensure a leak free seal between your filler neck and gas tank. Replaces OE # C5ZZ-9076....
1964-68 Ford Mustang; V8; Manual Transmission; Accelerator Linkage
Reproduction accelerator linkage for 1964-68 V8 Mustangs or 1967-68 V8 Cougar equipped with manual transmission. This linkage connects your accelerator pedal to the accelerator rod. It mounts to your firewall and includes the...
1967-72 GM; Brake or Return Fuel Line Clip; Under Body; R-Profile; 3/16"; Each
Reproduction of the original under body brake and fuel line clip for various 1967-72 GM models. This clip secures the brake and fuel line to the under body to keep the brake and fuel lines out of harm's way. This is a 3/16"...
Hex Head Sems Screw; With Washer; A/AB Point; 6.3-1.81 x 25mm; Black Phosphate; Each
Reproduction black phosphate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 6.3-1.81 x 25mm...
1962-1982 GM; Carburetor, Door, Tailgate; Spring Steel Rod Clip; RH Passenger Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
5/16-18 X 9/16" Self-Tapping Bolt. Brake and fuel line bolts with correct Anchor head marking. Self tapping, non pointed 1/2" bolt. Set of 6. {fitment}