Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-72 Chrysler, Plymouth, Dodge; Mopar Pentastar Front Fender Emblem; Silver; RH
Reproduction of the original fender Pentastar emblem designed for various 1967-72 Mopar models. Each emblem is manufactured like the original two piece Mopar design featuring a metal cover plate attached to a plastic backing....
1968 Dodge; CORONET Quarter Panel Emblems; White; Mopar Licensed
OER reproduction of the original "CORONET" quarter panel emblem letters for use with 1968 Dodge Coronet, Coronet 440, and Coronet 500 models (Except wagon). Each letter is manufactured in quality die-cast zinc, chrome plated,...
1968 Dodge Coronet; DODGE Grill Emblem; 5 Letter Set; Mopar Licensed
OER reproduction of the original "D-O-D-G-E" letters that mount to the grill of a 1968 Dodge Coronet. Each letter is manufactured in die-cast zinc material replicating the original in qwuality, design, and appearance. Each...
1967-71 Dodge, Plymouth; "383 Four Barrel"; Front Fender Emblem; Mopar Licensed
Authentic reproduction of the original 383 4 Barrel front fender emblem installed on a variety of "383 four barrel" equipped Dodge and Plymouth vehicles. Each emblem is designed and manufactured to exact specifications...
1968 Dodge Coronet; Fratzog Quarter Panel Emblem; Each
OER reproduction of the original "Fratzog logo"emblem that mounts to the rear quarter panels of a 1968 Dodge Coronet 4 door sedan models. Each emblem is manufactured in die-cast zinc, chrome plated, and painted with correct...
1968 Dodge Coronet; 500 Quarter Panel Emblem; White; Mopar Licensed
OER reproduction of the original "500" quarter panel emblem designed for use on a 1968 Dodge Coronet 500 models. (Except wagon). Each number is manufactured in quality die-cast zinc, chrome plated, featuring white accents as...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
1967-72 Chrysler, Plymouth, Dodge; Mopar Pentastar Front Fender Emblem; Gold; RH
Reproduction of the original fender Pentastar emblem designed for various 1967-72 Mopar models. Each emblem is manufactured like the original two piece Mopar design featuring a metal cover plate attached to a plastic backing....
1967-71 Dodge, Plymouth; 383 Four Barrel; Front Fender Emblem; Each; Mopar Licensed
Authentic reproduction of the original 383 4 Barrel front fender emblem installed on a variety of 383 equipped Dodge and Plymouth vehicles. Each emblem is designed and manufactured to exact specifications including correct...
1968 Dodge Coronet; "R/T" Grill Emblem; Mopar Licensed
Authentic reproduction of the original "R/T" grill emblem designed for use on 1968 Coronet R/T models. Each emblem is designed and manufactured in die-cast zinc metal to exact specifications. Features the corret red fill,...
1968 Dodge Coronet; R/T Front Fender Emblem; Each; Mopar Licensed
Reproduction of the original "R/T" front fender emblem designed for use with 1968 Coronet models. Painstakingly reproduced to factory specifications featuring highly polished chrome plating and the correct semi-gloss black...
1968 Dodge Coronet; DODGE Tail Panel Emblem; 5 Piece Letter Set; Mopar Licensed
OER reproduction of the original "D-O-D-G-E" emblem letters designed for use with all 1968 Dodge Coronet models except wagon. Each reproduction letter is manufactured in quality die-cast zinc replicating the original in...
1966-70 Dodge, Plymouth; V-8 Emblem; For Front Fender
Authentic reproduction die-cast V-8 fender emblem for a wide variety of Dodge and Plymouth A-Body, B-Body, and E-Body models. Each emblem is produced to factory original specifications featuring the correct silver finish with...
1968 Dodge Coronet; 440 Quarter Panel Emblem; LH or RH Side; Each; Mopar Licensed
OER® reproduction of the original "440" emblem that mounts to the rear quarter panels on1968 Dodge Coronet 440 models. Each emblem is manufactured in zinc die-cast material than chrome plated and painted with white...
"Objects In Mirror Are Losing " Exterior Side Mirror Decal; 4" x 5/8"
This is a crack up and a must have. Decal reads "OBJECTS IN MIRROR ARE LOSING".
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
Universal Barrel Nut Kit, fits 1/8" Emblem Stud, fits 11/64" Hole; 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut or tubular nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation....
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Push On Flat Nut, Fits 3/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits5/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex, 10 Piece Set
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Stud, Fits 7/32" Hole, Spring Steel, Phosphate Coated, 10 Piece Set
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Push On Flat Nut, Fits 1/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 1/8" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 5/32" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Push On Flat Nut, Fits 3/16" Stud, Black Phosphate Coated, 10 Piece Set
Replacement push on flat nuts used on various vehicles. Black phosphate coated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut Set; with Sealer, 3/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut, 5/32" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Thread Cutting Pal Nut Set; with Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original equipment for multiple GM applications, it can be used for other...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated, 10 Piece Set
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...