1966-70 Dodge, Plymouth B-Body; Front Frame Rail; LH Drivers Side
Reproduction of the original front frame rail designed to replace the old or damaged original rail on 1966-70 Dodge and Plymouth B-Body models. Each frame rail is manufactured is heavy-duty stamped steel that replicates the...
1960-76 Dodge "Six Pack" Hood Scoop; Fiberglass
Universal replacement of the Dodge "Six Pack" hood scoop originally designed for various Dodge models with a 3 x 2 carburetor setup. This hood scoop is manufactured in quality, automotive-grade fiberglass that replicates the...
1968 Dodge Charger; Quarter Panel Skin; RH; EDP Coated
Reproduction of the original quarter panel skin designed for use with 1968 Dodge Charger models. Each partial quarter skin panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1968-70 Dodge Charger; Rear Quarter Panel Half; RH; EDP Coated
Reproduction of the rear half quarter panel for use with 1968-70 Dodge Charger models. The panel is designed to replace the rear half section of the quarter panel when damage or rust is limited to the rear area. Covers the...
1968-70 Dodge Charger; Rear Quarter Panel Half; LH; EDP Coated
Reproduction of the rear half quarter panel for use with 1968-70 Dodge Charger models. The panel is designed to replace the rear half section of the quarter panel when damage or rust is limited to the rear area. Covers the...
1968-70 Dodge Charger; Rear Lower Corner Panel; RH Passenger Side
This reproduction rear lower corner panel is installed between the quarter panel and the rear lower valence panel. Features correct gauge sheet metal and a black electrophoretically deposited coating (EDP, or E-coat) for...
1966-70 Dodge, Plymouth B-Body; Front Inner Rocker Panel; Coupe; RH; EDP Coated
Reproduction of the original front inner rocker panel designed for use with 1966-70 Dodge and Plymouth B-body models. Manufactured in quality stamped steel to original specifications replicating the original configuration and...
1968-70 Dodge, Plymouth B-Body; Inner Cowl Side Inner Hinge Panel; LH Drivers Side
Reproduction of the original inner cowl side hinge panel designed for use with 1968-70 Dodge and Plymouth B-Body models. Comes with black EDP coating for rust and corrosion prevention.
1968-70 Dodge B-Body; Front Fender Rear Splash Shield; RH
Reproduction of the original rear fender splash shield designed for use with various 1968-70 Dodge B-body models. Each splash shield is manufactured in stamped steel to original factory specifications featuring correct...
1966-70 Dodge, Plymouth B-Body; Rear Inner Rocker Panel; LH Drivers Side; EDP Coated
Reproduction of the original factory-style inner rocker panel designed for use with 1966-70 Dodge and Plymouth B Body models. Each inner rocker panel is manufactured in stamped steel to original factory specifications...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually.
1966-70 Dodge, Plymouth B-Body; Lower Cowl Panel; EDP Coated
Reproduction of the original lower cowl panel for use 1966-70 Dodge and Plymouth B-Body models. Each lower cowl panel is manufactured in stamped steel with all correct contours for an exact fit. Comes with black EDP coating...
1968-70 Dodge, Plymouth B-Body; Front Firewall Panel; w/o Air Conditioning; EDP Coated
Reproduction of the original firewall panel designed for use with 1968-70 Dodge and Plymouth B-Body models. This replacement firewall features the correct contours and openings for steering column and other components. Each...
1966-70 Dodge, Plymouth B-Body; Front Frame Rail; RH Passenger Side
Reproduction of the original front frame rail designed to replace the old or damaged original rail on 1966-70 Dodge and Plymouth B-Body models. Each frame rail is manufactured is heavy-duty stamped steel that replicates the...
1960-76 Dodge, Plymouth; Dual Snorkel Hood Scoop; Universal Design; Fiberglass
Universal style dual snorkel hood scoop for use with various 1960-76 Dodge and Plymouth models as listed. This hood scoop is manufactured in quality, automotive-grade fiberglass. Can be installed on any flat hood for this...
1968 Dodge Charger; Full Trunk Floor Pan; 1968 Early Design; EDP Coated
Quality reproduction of the original trunk floor pan for use with 1968 Dodge Charger early production (1st design) models. This reproduction trunk floor pan is manufactured with quality stamped steel that features the...
1968 Dodge Charger; Quarter Panel Skin; LH; EDP Coated
Reproduction of the original quarter panel skin designed for use with 1968 Dodge Charger models. Each partial quarter skin panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1968 Dodge Coronet, Super Bee; Quarter Panel Skin; RH; EDP Coated
Reproduction of the original quarter panel skin designed for use with 1968 Dodge Coronet and Super Bee models. Each partial quarter skin panel is manufactured in stamped steel to original factory specifications featuring...
1968 Dodge Coronet, Super Bee; Quarter Panel Skin; LH; EDP Coated
Reproduction of the original quarter panel skin designed for use with 1968 Dodge Coronet and Super Bee models. Each partial quarter skin panel is manufactured in stamped steel to original factory specifications featuring...
1968-70 Dodge, Plymouth B-Body; Lower Door Hinge Pillar; 2 Door; RH Passenger Side
This replacement lower door pillar is the mounting point for the lower door hinge on Dodge and Plymouth B-Body 2 door models. Each pillar is manufactured in stamped steel to the correcy configuration allowing replacement of...
1968-70 Dodge, Plymouth B-Body; Lower Door Hinge Pillar; 2 Door; LH Drivers Side
This replacement lower door pillar is the mounting point for the lower door hinge on Dodge and Plymouth B-Body 2 door models. Each pillar is manufactured in stamped steel to the correcy configuration allowing replacement of...
1968-70 Dodge, Plymouth B-Body; Trunk Floor Reinforcement Set ; 3 Piece Set
Reproduction of the original style trunk reinforcements for use with 1968-70 Dodge and plymouth models. Each trunk floor reinforcement is manufactured in stamped steel to original factory specifications featuring correct...
1968-70 Dodge Charger; Rear Lower Corner Panel; LH Driver Side
This reproduction rear lower corner panel is installed between the quarter panel and the rear lower valence panel. Features correct gauge sheet metal and a black electrophoretically deposited coating (EDP, or E-coat) for...
1966-70 Dodge, Plymouth B-Body; Front Inner Rocker Panel; Coupe; LH; EDP Coated
Reproduction of the original front inner rocker panel designed for use with 1966-70 Dodge and Plymouth B-body models. Manufactured in quality stamped steel to original specifications replicating the original configuration and...
1968-70 Dodge, Plymouth B-Body; Inner Cowl Side Inner Hinge Panel; RH Passenger Side
Reproduction of the original inner cowl side hinge panel designed for use with 1968-70 Dodge and Plymouth B-Body models. Comes with black EDP coating for rust and corrosion prevention.
Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"
Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...
1966-70 Dodge, Plymouth B-Body; Rear Inner Rocker Panel; RH Passenger Side; EDP Coated
Reproduction of the original factory-style inner rocker panel designed for use with 1966-70 Dodge and Plymouth B Body models. Each inner rocker panel is manufactured in stamped steel to original factory specifications...
Reproduction of the original style repair panel designed for use with 1968-70 Dodge and Plymouth B-Body models. Each inner lower deck panel is manufactured in quality stamped steel to factory configuration. Designed to repair...
1966-70 Charger, Coronet, GTX, Road Runner, Satellite; Front Floor Support; LH or RH; Each
Reproduction of the original front floor support for use with 1966-70 Dodge and Plymouth B-Body models. Each floor support bracket is manufactured in stamped steel to original factory specifications featuring correct contours...
Reproduction of the original style repair panel designed for use with 1968-70 Dodge and Plymouth B-Body models. Each inner lower deck panel is manufactured in quality stamped steel to factory configuration. Designed to repair...
1966-70 Dodge, Plymouth B-Body; Rear Floor Support; LH or RH; Each
Reproduction of the original rear floor support for use with 1966-70 Dodge and Plymouth B-Body models. Each floor support bracket is manufactured in stamped steel to original factory specifications featuring correct contours...
1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each
Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...
OER® Professional Grade; Black Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER Professional Grade; Weld-Thru Galvanizing Spray Coating; Gray; 16 Oz Aerosol Can (Net Wt. 12 Oz)
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Comes in a 16 Oz. Aerosol Can (Net Wt. 12 Oz.). Perfect for...
OER® Gray Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Gloss Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Flat Black High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Gray High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
1968-70 Dodge Charger; Trunk Floor Extension; LH Drivers Side; EDP Coated
Reproduction of the original trunk floor extensions for use with 1968-70 Dodge Charger models. This often rusted or damaged extension panel, this panel is installed on the sides of the trunk pan where the trunk pan drops off...
OER® Professional Grade Gray Weld-Thru Galvanizing Spray Coating Case of 6 - 16 Oz Aerosol Cans
OER® Weld-Thru Galvanizing Primer is a smooth, cold galvanizing compound that chemically fuses to bare steel and forms an extremely rust-resistant barrier. Perfect for application on the inside of newly installed panels...
OER® Dark Gray High Solids Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating Case of 6 - 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER Professional Grade Red Oxide Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 17...
OER® Gloss Black High Solids Detail Coating 16oz Net Weight
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Green Zinc Phosphate Primer; 16 Oz. Aerosol Can (Net Wt 12 Oz)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...
OER® Professional Grade; Red Oxide High Solids Sanding Primer; 20 Oz Aerosol Can (Net Wt. 17 Oz)
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
1960-76 Dodge/Plymouth; Rubber Body And Trunk Plug; 1-1/8"
Reproduction body / trunk plug used on most 1960-76 Dodge or Plymouth models where a 1-1/8" hole plug is needed. Manufactured of rubber for original appearance, fit and function. Sold individually. Use as required.
OER® Red Oxide Professional Grade High Solids Sanding Primer Case of 6 - 20 Oz Aerosol Cans
A superior professional grade primer formulated with 40% solids to provide twice the coverage of conventional aerosol primers. One 20 oz. can will cover as much area as four 16 oz. cans of a conventional low solids...
OER® Professional Grade; Gray Self Etching Sanding Primer; 20 Oz Aerosol Can (Net Wt. 15 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Comes in a 20 Oz. Aerosol Can (Net Wt. 15...
1968-70 Dodge Charger; Trunk Floor Extension; RH Passenger Side; EDP Coated
Reproduction of the original trunk floor extensions for use with 1968-70 Dodge Charger models. This often rusted or damaged extension panel, this panel is installed on the sides of the trunk pan where the trunk pan drops off...
OER® Professional Grade Green Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Professional Grade Yellow Zinc Phosphate Primer Case of 6 - 16 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form a...
OER® Gray Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Red Oxide Professional Grade Self Etching Sanding Primer Case of 6 - 20 Oz Aerosol Cans
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel, but comes conveniently packaged for the automotive enthusiast. Tough and dependable, this primer adheres...
OER® Black Wrinkle Finish Paint Case of 6 - 16 Oz Aerosol Cans
Black Wrinkle finish is a durable and long lasting finish, which has a unique, wrinkled texture. Its excellent finish for hiding imperfections like pitting, scratches or chips. Extremely durable formula resists oil, gas and...
OER® Aluminum High Solids Detail Coating Case of 6- 16 Oz Aerosol Cans
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® High Solids Stainless Steel Detail Coating 16 Oz Net Weight Aerosol Can
A superior professional grade coating formulated for restorations where maximum performance is required. This high solid paint does not run or sag, and provides twice the coverage of conventional aerosol enamels. Net Weight:...
OER® Professional Grade; Yellow Zinc Phosphate Primer; 16 Oz Aerosol Can (Net Wt. 12 Oz.)
OER® professional grade primer is specifically formulated to meet the performance needs of body shop personnel. This specially formulated primer is chromate-free and chemically bonds with iron, steel and aluminum to form...