1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1968 Camaro, Chevy II Nova, Firebird; Subframe Assembly; OEM Style; without Trans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high quality Restorer's Choice reproduction. This reproduction subframe assembly is engineered to...
1968 Camaro, Firebird, Chevy II, Nova; Subframe Assembly; with TH400 Crossmember ; OEM Style
Reproduction of the original complete subframe assembly designed for use with 1968 Camaro, Nova, and Firebird models equipped with TH400 crossmembers. Instead of repairing a damaged or internally compromised factory subframe,...
1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1968-74 Nova, Ventura, Apollo, Omega; Front End Suspension Rebuild Kit; Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-1969 Camaro and Firebird models, as well as 1968-1979 Nova, 1971-1977 Ventura, 1973-1980 Omega, 1973-1975 Apollo, and 1975-1980 Skylark models equipped with multi...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular lower control arms. Stronger and lighter than factory arms, these tubular replacements provide improved...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
1967-69 Camaro, Firebird, Nova; Rear Axle Pinion Rubber Bumper, Each
OER reproduction rear axle pinion bumper for 1967 Camaro and Firebird (2nd design), 1968-1969 Camaro and Firebird models, and 1968-1969 Chevy II and Nova. Manufactured from high quality molded rubber, this bumper accurately...
1968-81 Camaro, Firebird, Nova; Rear Sway Bar Anchor Plate Bolt; 7/16"-20 X 1-5/16"
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
1964-69 Camaro, Chevelle, Nova, Firebird; Front Sway Bar Brackets; Pair
Reproduction of the original style U-shaped sway bar bushing clamps designed for use on various 1967-69 GM models. These factory correct reproductions are used to hold the inner sway bar bushings and the sway bar to the...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH Passenger Side
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1968-69 Camaro, Firebird, 1968-79 Nova; Multi Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, preventing metal to metal contact that can lead to noise, vibration, and premature wear. These pads help maintain proper...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
Includes all the components needed to replace the original bushings and hardware. One set services only one side of the vehicle, with two sets required per vehicle. Features a 2" spacer for proper installation and alignment....
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Bolt Set; 6 Piece Set
Quality reproduction rear spring eye bracket bolts designed to mount the leaf spring front eye bracket. Each bolt is case hardened for exceptional durability, strength, and long lasting performance. An ideal replacement for...
1964-1981 Various GM Vehicles Camaro, Firebird, GTO, Cutlass; Coil Spring; Spacer 3/8"
We now have reproduction of the coil spring spacer that goes between the front lower control arm and spring for 1964-81 GM Applications including Camaro, Firebird Cutlass and GTO models. It is perfect to lift the front end a...
1960-88 Various GM Vehicles Camaro, Impala, Cutlass; Front Sway/Stabilizer Bar; Bushing 1-1/4"
New 1-1/4" sway bar bushing for use with original bracket various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment. Replace the old...
1960-96 Various GM Vehicles Camaro, Cutlass, Impala; Front Sway/Stabilizer Bar; Bushing WS6; 13/16"
New 13/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
New 15/16" sway bar bushing WS6 for heavy duty stamped bracket for various 1961-96 GM vehicles which includes Impala, Cutlass, Monts Carlo and Camaro. Manufactured to meet or exceed the OEM in both quality and fitment....
1967-69 Camaro, Firebird; 1962-69 Chevy II Nova; Rear Leaf Spring Shackle; LH or RH; Each
This reproduction rear spring shackle is engineered for 1967-1969 Camaro and Firebird models and built to match the original in appearance, quality, and fit. Designed to OEM specifications, each shackle includes all required...
1967-74 GM; Control Arm Ball Joint; Upper
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Reproduction sway bar end link for various 1955-2005 GM car and truck models. Replaces the sway bar end links to eliminate issues associated with worn out links. Each sway bar link includes rubber bushings. Includes 4...
1967-81 Camaro Z/28, Firebird, Nova; Rear Leaf Springs; 4 Leaf; Spring Rate 126 lbs; Pair
Reproduction of the original 4 leaf rear leaf springs designed for use with 1967-1969 Camaro Z28 (302), 1968-1981 Firebird 400 and other performance models, as well as Chevy II, Nova, and various GM X body models originally...
Reproduction molded rubber front coil spring insulator designed to mount between the coil spring and the frame on various 1949-2002 vehicles. This insulator prevents metal to metal contact, reducing noise, vibration, and...
1964-74 GM; Lower Ball Joint; Various Models; RH or LH
Control arm ball joints take a beating over the years and often cause "slop" in your front end, creating dangerous driving conditions. If your suspension rattles or makes noises when turning or going over bumps, it might be...
Replacement sway bar designed to reduce body roll, under steer, and over steer during cornering, resulting in improved vehicle handling, control, and driving confidence. Engineered to enhance stability without negatively...
Grade 5, size 7/16-14 USS hex nut, in zinc plated finish. Sold individually. Specifications: Screw Size : 7/16-14 Across Flats : 11/16" Grade : 5 S.A.E. Standard : J995 Finish : Zinc Proof Load : 120000 Rockwell Hardness :...
1974-78 Ford Mustang II, Pinto; Spindle Set; Forged Steel; Stock Height; Pair
Our Mustang II stock height front spindles are built from forged steel and heat treated for superior strength. Will fit 1974-78 Ford Mustang, 1974-80 Ford Pinto, and 1975-80 Mercury Bobcat. Mustang II style spindles are also...
1967-69 Camaro, Firebird, 1968-74 Nova; Upper Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular upper control arms. Stronger and lighter than the original factory arms, these performance oriented tubular...
1967-74 Camaro, Firebird, Nova, Omega, Ventura, Apollo; Front End Bushing Kit
The control arm bushings are a critical component in maintaining proper vehicle control and overall suspension performance. Worn or deteriorated bushings can negatively affect handling, ride quality, and steering response,...
1974-78 Mustang II; Front Sway Bar Kit; 3/4" ; 43-1/4" Wide; for Standard Crossmember
Replacement 3/4" sway bar kit for hot rods and custom trucks equipped with standard width crossmember Mustang II front suspension systems. This sway bar is engineered to reduce body roll, under steer, and over steer during...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Sway Bar; OE Design ; 7/8"; Silver Zinc Plating
Reproduction of the original design rear sway bar set for various 1968-74 GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II Nova, and 1973-74 GM X-body models. Features a gold zinc plated finish similar to the...
Rear Leaf Spring U-Bolts; 3-1/2" Wide X 7-1/4" Long; Fits 3-1/2" Axle Tubes
Replacement OE-style U-bolts and nuts for rear leaf springs from OER®. 2 pair required per axle. Comes with heat treated grade 8 nuts and F436 heat treated and hardened heavy duty washers. {specs} Applications: 1973-74...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; LH Driver Side; EDP Coated
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
Front Boxing Plate set designed for use when boxing in the frame. These boxing plates weld into place to box the frame in critical front suspension attachment points when converting to a Mustang II style IFS - Independant...
1967-69 Camaro, Firebird, 1962-69 Chevy II Nova; Leaf Spring Shackle Bushing Set; 8 Piece Set
Reproduction of the original style leaf spring shackle bushings for use with 1967-69 Camaro, Firebird, and 1962-69 Chevy II and Nova models. Replace your cracked, shrunken or worn out shackle bushings and bring your rear...
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Mono Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, reducing metal to metal contact, vibration, and noise. These pads help protect the spring assembly, maintain proper suspension...
1967-81 Buick, Chevrolet, Oldsmobile, Pontiac; Rear Axle Pinion Bumper; Each; Various Models
This reproduction rear axle pinion bumper is designed for various GM models and manufactured from high quality molded rubber with an integrated steel bracket formed in the correct OE configuration. Built to replicate the...
1967-74 Camaro, Firebird, Nova; Front Sway Bar Sleeve Brackets; Pair
Reproduction of the correct front sway bar sleeve brackets designed for use with various 1967-74 Chevrolet, Buick, Oldsmobile, and Pontiac models. These sleeve brackets mount on the front sway bar next to the sway bar bracket...
1967-81 Camaro, Firebird, Nova, GM X-Body; Spring Eye Bracket Nut Kit; 6 Piece Set; Various Models
Quality reproduction spring eye bracket nut kit to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting fastening when paired with the...
Sway Bar Bracket; Tab Style; Universal; End Link to Lower Control Arm or Frame Rail, LH or RH
This universal sway bar end link bracket is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
This universal sway bar end link bracket set is for cars and trucks that did not come from the factory with a sway bar end link mount on the lower control arm or frame rail. Provides a solid mount to be used to secure the end...
1967-81 Camaro, Firebird, Nova, GM X-Body; Rear Spring Eye Bracket Nut; Each
This is a quality reproduction of the original style spring eye bracket nut used to mount the leaf spring front eye bracket. Manufactured to high strength specifications, each nut is designed to provide secure, long lasting...
1968-79 Camaro, Firebird, Nova, X Body; Rear Leaf Spring Pad; Multi Leaf; Upper & Lower; Each
Reproduction of the original multi leaf, upper and lower rear leaf spring pad designed for use on various GM models. Each pad is manufactured to OE specifications in EPDM rubber compound. Always replace the rear leaf spring...
1961-75 Buick, Chevy, Olds, Pontiac; Upper Control Arm Bumper; Each
Quality reproduction of the original upper control arm bumper designed for use with various 1967-75 General Motors models. Each bumper is manufactured in heavy duty EPDM molded rubber material to original specifications...
1966-74 Camaro, Firebird, Nova; Lower Control Arm Bushing; Each
Chevrolet Applications: 1967-1968 Chevrolet Camaro (toward front of vehicle) 1969-1969 Chevrolet Camaro (toward front of vehicle) 1970-1970 Chevrolet Camaro (toward rear of vehicle) 1966-1969 Chevrolet Chevelle (toward rear...
1967-69 Camaro, Firebird, 1968-74 Nova; Rear Leaf Spring Installation Kit; Multi Leaf; with Sway Bar
Reproduction of the original and complete rear leaf spring installation kit designed for use on 1967-74 various GM vehicles equipped with multi-leaf rear springs including 1967-1969 Camaro, Firebird, and 1968-74 Nova models....
1967-69 Camaro, Firebird, 1962-74 Chevy II, Nova; Rear Leaf Spring Pad; Upper; with Mono Leaf
Reproduction of the original mono leaf upper rear spring pad designed for use on various GM models. Each pad is manufactured to OE specifications using quality EPDM rubber compound for long lasting dependability. Always...
1964-75 Camaro, Chevelle, Firebird, GTO; Upper A-Arm Bolt and Nut Set; 8 Piece Set
Reproduction of the upper control arm cross shaft bolt set used to retain the shaft to the frame mounting ears on various GM vehicles. The grade 8 ratings nuts & bolts are made from high strength steel which as been formed...
1964-74 GM; 2" Drop Spindles; with Disc Brakes; RH & LH; Pair; Various Models
These reproduction 2 inch drop spindles are designed for various 1964-1972 Buick, Chevrolet, Pontiac, and Oldsmobile A, F, and X body models and serve as a direct replacement for OE single piston disc brake spindles....
1955-72 GM; Lower Control Arm Bumpers; Polyurethane; Black; Pair
Polyurethane lower control arm bumper stops are guaranteed to last longer and perform better than O.E.M. rubber stops. Cushions impact between suspension components preventing excessive damage. Sold as a pair. 1 pair required...