1956-80 General Motors / Mopar Truck Power Steering Return Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1965-69 Power Steering Pressure Hose
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
3/8" X 48" Power Steering Return Hose; Without Fittings; Cut to Fit
A leak in your power steering system can make a mess of your engine compartment, your driveway and garage floor. You can also burn up your power steering pump by driving your classic when it is low on fluid. OER®...
1965-68 Camaro, Impala, Caprice, Nova; Power Steering Adjust Bracket; Big Block; 396ci, 427ci
Reproduction of the original big block power steering adjustor bracket designed for use with 1965-68 Chevrolet Impala, Bel Air, Biscayne, Caprice, 1967-68 Camaro, and 1968 Nova models with big block engines. Manufactured in...
1961-99 GM, Chrysler, Dodge Plymouth; Saginaw Power Steering Pump Cap
Reproduction of the power steering pump cap designed for use with a variety of 1961-2005 GM, and Chrysler, Dodge, Plymouth models that included a Saginaw power steering pump. Each cap is manufactured in quality injection...
Reproduction of the original style power steeing pump fitting for use with various 1960-77 Chrysler, Dodge, Plymouth, and GM models as listed. Many Saginaw power steering pumps with a female style fitting require an adapter...
1955-72 Chevrolet Power Steering Bracket Set; Small Block; LH Side Mount; w/Short Water Pump; Chrome
This convenient 1/4" steel power steering bracket set is designed for mounting GM Saginaw power steering pumps, with integral reservoir, to small block Chevy engines. Features a polished chrome finish. Universal LH side...
3/8" x 24" Power Steering Return Hose; Without Fittings; Cut to Fit
Service replacement power steering hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn out or cracked power...
1968-74 Chevrolet; Power Steering Pump Pulley; For V8 With AC; Double Groove
Reproduction power steering pump pulley for 1969-74 V8 models with AC. Fits Chevrolet 307 / 350 / 400 / 454 engines. Number stamped on pulley is 3941107DE. Application Summary: 1968-74 with V8 with AC {fitment} {specs}
1978-2006 Power Steering Pump Supply Hose Fitting; Metric; O-ring Style
Power steering pump supply hose fitting for 1978-2006 Saginaw power steering pumps requiring a metric style fitting with the o-ring style seal. This fitting is necessary to mount the cover to the pump and connects to the...
1967-68 Camaro V8, 1968 Nova V8; Chrome Power Steering Pump; with "Banjo Style" Reservoir
Dress up your engine compartment with this all new OER® Authorized chrome power steering pump with a banjo style reservoir. This all new pump is a great replacement for small block or big block models. This power steering...
1967-68 Camaro; 1968 Chevy II Nova Power Steering Pump; with Reservoir; V8 327, 350
If you're looking for a power steering pump for your classic vehicle and are finding that your part has become obsolete and cores for reman units are unavailable, you can now replace that obsolete pump with a brand-new...
1965-68 Chevrolet; Power Steering Adjustor Bracket ; 283ci, 307ci, 327ci; Small Block
OER® reproduction of the original small block power steering adjustor bracket for use with various 1965-68 GM small block models. Manufactured in stamped steel, this bracket was original installed for a variety of...
1960-75 Camaro, Impala, Nova, Truck; Power Steering Pump Pulley; Single Groove
OER® reproduction of the original power steering pump pulley designed for use with for various 1960-75 Chevrolet models as listed. Manufactured from formed and machined steel with the correct key way fit design and...
This is a quality OER® reproduction of the original power steering pump pulley designed for use on various GM applications..This pulley is manufactured to exact factory specifications and stamped with the original GM part...
1962-99 Chevrolet, Pontiac; Saginaw Pump Power Steering Cap; Chrome
Replace your damaged or missing power steering cap with this quality chrome aftermarket cap to dress up your engine compartment. This cap is designed to fit most Saginaw Power Steering pump reservoirs including some of the...
Reproduction of the original style power steering reservoir designed for use with 1963-66 Corvette, 1967-68 Camaro, and 1968 Chevy II Nova small block, V8 models. Replace the old, dented, leaking, or missing reservoir with...
1960-1972 Buick, Chevy, GMC, Pontiac, Oldsmobile; Power Steering Pump Cap; OEM Style; Various Models
Reproduction original power steering pump cap for various 1961-72 Buick, Chevrolet, GMC, Pontiac, and Oldsmobile models as listed. This is not a factory service replacement or aftermarket cap, this is a genuine reproduction...
1967-68 Power Steering Reservoir; For Saginaw PS Pump; Small Block; Chrome
Replace that dented, leaky or missing reservoir with a brand new one. This reservoir comes with all o-rings and hardware necessary to install on your power steering pump. When appearance is a concern, this OE style reservoir...
Power Steering Return Hose; 3/8" I.D. X 36"; Cut to Fit
Reproduction of the original style power steering return hose. A leak in your power steering system can lead to a very serious and possibly dangerous situation. Leaking hoses can cause a loss of steering. Replace your worn...
Power Steering Pressure Line Clamp
This OER® line clamp is manufactured from die stamped steel. Each piece is plated in clear zinc to help protect it from rust and corrosion. Clip slips over the high pressure line and is secured to the gear box top cover...
1963-77 Power Steering Pump Supply Hose Fitting; SAE; Inverted Flare Style
Power steering pump supply hose fitting for 1977 and older Saginaw pumps requiring an SAE style fitting with the inverted flare. This fitting is necessary to mount the cover to the pump and connects to the supply pressure...
1960-77 Power Steering Pulley Nut & Washer Set; for GM Models
Reproduction power steering pulley washer and nut for various 1960-77 GM models. This lock-nut and washer set is needed to secure the power steering pulley to the pump. Measures 9/16"- 18. {fitment}
1962-2002 AMC, Chrysler, Ford, GM; Saginaw Power Steering Pump Rebuild Set; 3/4" Shaft
This OER® power steering pump rebuild set designed for use with various AMC, Chrysler, GM, and Ford models that included a Saginaw power steering pump. This rebuild kit includes the essential parts needed to rebuild your...
5/16"-24 Grade 8 Hex Nut Zinc; Each
5/16"-24 Grade 8 hex nut in zinc & yellow finish. Sold individually. Product Specifications: Screw Size : 5/16-24 Across Flats : Hex Width: 7/16" Grade : 8 Finish : Zinc & Yellow Proof Load : 150000 Rockwell Hardness :...
1960-77 GM & Mopar; Saginaw Power Steering Fitting Adapter; 5/8"-18 to -6AN
This is the hose adapter fitting for Saginaw power steering gear box or pump. Straight, inverted flare zinc coated steel, 5/8"-18 to -6AN. Fits most Saginaw gear boxes or pumps 1960 through 1977 including Saginaw P series....
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is the chrome plated set...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Stud And Bolt Kit; Black Phosphate Coated Bolts
This is the stud and bolt kit for Saginaw power steering pumps. Includes (2) studs (3/8"-16 thread), (1) bolt 3/8"-16 thread). Fits most Saginaw pumps through 1977 including Saginaw P series. This set is black phosphate...
1962-2002 GM & Mopar; Saginaw Power Steering Pump Reservoir Installation Kit; Standard Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has unfinished hardware that are designed to be used with a...
1962-2002 GM, Chrysler, Plymouth, Dodge; Saginaw Power Steering Pump O-Ring Seal Kit
Reproduction of the O-rings for 1962-77 Saginaw power steering pumps. Includes 8 seals to replace the old or worn out originals for the pump to the reservoir. Does not include the shaft seal. Fits most Saginaw pumps through...
1962-2002 GM & Mopar; Saginaw; Power Steering Reservoir Installation Kit; Chrome Finish
This 11 piece set includes the o-rings, gaskets, seals, hardware and washers you will need to install a reservoir on your saginaw power steering pump. This set has chrome hardware that are designed to be used with a chrome...