This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...
Reproduction 4-speed shifter and linkage assembly for 1968-72 Chevelle, Malibu, and El Camino models, as well as 1970-72 Monte Carlo, equipped with a Muncie 4-speed transmission. Manufactured to factory specifications, this...
1953-1990 GM; Speedometer Cable; 55"; Thread-On; Various Models; OER
Reproduction of the original lower speedometer cable designed for use with various 1953-1990 GM models as listed. Each cable is designed and manufactured to replicate the original in functionality. This cable measures 55" in...
Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market. This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...
1962-73 GM; Flywheel Pan Cover; Torque Convertor Cover; with Powerglide Trans
OER® reproduction of the original flywheel pan (also called a torque converter cover) for use with various 1962-73 Chevrolet models. Each flywheel pan cover, aka the torque drive convertor cover is manufactured to OE...
Reproduction '621' 11" bellhousing kit for various models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For Chevrolet big block or small block engines equipped with an 11" clutch. Replaces original GM...
1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter
Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...
Universal Frame Mount Manual Brake Pedal Bracket Assembly; GM Booster Style; Under Floor Mount
Universal frame mount brake pedal assembly for GM style brake booster with 4 bolt 3-3/8? center. For automatic transmission equipped, left hand drive hot rod and truck models. Great for under the floor, frame mount...
Chrome Transmission Dipstick & Tube; TH400; 24" Long
This chrome plated dip stick with tube for the GM hydro-matic transmissions is an OEM design which will fit most applications without modification. For some vehicles, modification may be necessary for proper installation....
1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1968-72 Horseshoe Shifter Installation Hardware Set ; Various GM Models
OER® reproduction shifter installation hardware set for models equipped with a floor console and horseshoe automatic shifter. Includes correct factory style clips to attach the shift cable to the base and all necessary...
1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;
Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...
Powerglide Transmission Dipstick; Firewall Mount; Flexible; Stainless Steel
You will have flexibility with this transmission dipstick designed for use with GM Powerglide transmissions. This firewall mount dipstick features a flexible stainless steel braided cable, aluminum knob, and a fill tube. Each...
Reproduction shift control cable for 1968-69 Chevelle, El Camino with automatic transmission and a Yenko shifter and 1968-69 Cutlass, 1967-68 GTO, LeMans and Tempest with Dual Gate shifter. The cable is an identical...
Reproduction speedometer cable and casing for 1958-68 GM models with screw-on style cable at both ends. Thread sizes are 7/8-18 female on one end and 5/8-18 female on the other. Each cable is manufactured to exact OE...
Reproduction speedometer cable for various 1958-68 GM applications with automatic transmission including Impala, GTO, Camaro, Skylark. This cable is a screw on type at both ends and is 57" long. If the speedo isnt working or...
1964-72 GM Models; Clutch Fork; 6 or 8 Cyl; Original Design; 10-3/8" Long
Manufactured to meet or exceed all original OEM specifications. Correct for small or big block. Exact replacement. Unlike others offered, ours functions perfectly for listed applications. GM Group #: 0.795 GM Part #: 3892632....
1967-90 Buick, Chevrolet, GMC, Pontiac, Oldsmobile; Speedometer Cable; 83"; Push-On Style; OER
Quality reproduction of the original speedometer cable designed for use with various 1967-90 GM applications including Regal, Impala, GTO, Camaro and Chevrolet & GMC Truck models. This complete speedometer cable assembly is...
Muncie 4-speed manual transmission shifter bracket for 1968-72 Skylark, Cutlass, Chevelle, El Camino and 1970-72 Monte Carlo models. This bracket is welded to the transmission crossmember and the shifter mounts to it. Used to...
1969-87 Chevy, Olds, Pontiac; Transmission Shifter Bracket; TH350/TH400 Trans; Various Models
Reproduction of the original shift lever designed for use with 1969-87 Chevrolet passenger car and truck models. This lever connects the automatic shifter cables and linkages to a TH350, or TH400 transmission. For use with a...
1968-72 Chevrolet Chevelle, El Camino; 4-Speed Manual Transmission; Shifter Support Rod
Reproduction Muncie shifter loewer support rod 1968-72 Chevelle and El Camino models with manual transmission. This rod/support is 5 inches long and goes from the shifter to the crossmember to stabalize the shifter. Sold...
Reproduction of the steering column lower arm lockout rod grommet/bushing with plastic insert for multiple GM vehicles. GM#'s 1394293 bushing - 22503153 insert. The bushing measures.410" ID x.640 OD. Nylon insert...
1962-83 Buick, Chevy, GMC, Olds, Pontiac; Speedometer Cable; 73" Long; Thread-On
Quality reproduction of the original speedometer cable designed for use with various 1962-83 Buick, Chevrolet, Oldsmobile, and Pontiac models. This complete speedometer cable assembly is manufactured to correct factory...
1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length
This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...
1964-1981 Chevrolet; Clutch Housing / Flywheel Cover ; for 11" Bellhousing
Reproduction of the original style clutch housing and flywheel cover plate designed for use on a variety of 1964-81 Chevrolet models as listed. Manufactured in stamped steel to original specifications that replicate the...
1964-83 Chevrolet; Bell Housing; High Performance; 11"; Aluminum; Standard Duty
Reproduction of the original '621' 11" bellhousing for various 1964-83 Chevrolet models with Muncie M-20, M-21, M-22, Saginaw, Borg Warner T-10 Transmissions. For big block or small block engines equipped with an 11" clutch....
A reproduction installation set for use when installing a Hurst Competition Plus shifter on 1968 and earlier Muncie 451 transmission. See various applications listed. Can also be used for custom installs on various passenger...
Shifter Install Kit; For Hurst Shifter and Muncie 452/453 Transmissions
Reproduction shifter installation kit required to fit a Competition Plus Shifter on various GM models including 1969-70 Chevy Nova models equipped with Muncie 452 or 453 transmissions. It will work with or without the factory...
GM TH350/400 Transmission Dipstick; Flexible Firewall Mount; 27" Long
This flexible transmission dipstick features an aluminum handle, steel braided housing and a teflon dipstick. It fits push-in style transmissions with an o-ring seal. Includes a clear plastic tube with fitting to adapt a...
1963-2001 GM; Transmission Mount; Black Polyurethane; Zinc Finish; 1-15/16" Tall
Chemicals, excessive movement and overall time in general can take it's toll on one of the most crucial components of your driveline, the transmission mount. Once available only in degradable rubber compound, this mount is...
1967-1971 GM; Various Models; Hurst 4-Speed Shift Knob; 1-3/4" with 3/8"-16 Thread; White
Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This white shift knob is manufactured in quality ABS with a steel insert. This 1-3/4" shift knob can be installed on most factory shifters with the...
Lower Clutch Push Rod ; Various GM Models
OER® reproduction of the original lower clutch push rod adjustor designed for use on various GM models. This push rod is manufactured to original specifications and includes the swivel. Will replace any original non...
1968-72 Camaro, Impala, Caprice, Chevelle; Horseshoe Shifter Handle; with TH350, TH400 Trans
OER® reproduction of the original shifter handle designed for use with various 1968-72 Chevrolet models equipped with a center floor console and a Horseshoe style shifter with TH350 or TH400 transmission. Each shifter...
Very good reproduction shift lever/arm 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications that do not...
Great reproduction 1968-1972 Chevelle, El Camino and 1970-72 Monte Carlo with manual transmission. This is a chrome shifter lever with "MUNCIE" embossed on the side. This is for applications with bucket seats and that do have...
1968-69 GTO, Cutlass, 442, Chevelle; Automatic Transmission; Hurst Dual Gate Shifter; Cable
Reproduction 1968-69 Cutlass, GTO, LeMans, El Camino with TH-350 or TH-400 automatic transmission and Hurst Dual Gate shifter cable. The cable measures 53" center to center eyelets and 39" from the bracket on the trans...
1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base
Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...
1968-72 Camaro, Impala, Chevelle; Horseshoe Shifter Installation Hardware Set
OER® reproduction of the original style supplemental floor shifter hardware set designed for use with various 1968-72 Chevrolet models with TH350 and TH400 transmissions. This comprehensive hardware set includes all...
Light Green 34 Teeth Speedometer Gear
This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...
Correct transmission flywheel convertor cover for various 1965-1972 Chevrolet car and truck models equipped with TH400. Each cover is manufactured in steel to factory specifications for an authentic appearance and fitment....
1964-79 GM; Transmission Dipstick; TH400 Auto Trans; 24-1/8" Long; Various Models
Reproduction of the original TH400 transmission dipstick designed for use with various 1964-79 Buick, Chevrolet, Oldsmobile, and Pontiac models. This reproduction automatic transmission dipstick is manufactured with obsessive...
1970-81 Pontiac Firebird, 1973-81 Chevrolet Camaro; Shift Cable; Seal/Boot
This seal replaces the gearshift control cable seal on various GM vehicles including 1973-1981 Chevrolet Camaro and 1970-1981 Pontiac Firebird models with automatic transmissions and floor console gearshifts. Manufactured...
1968-72 TH400 Transmission Control Cable Bracket
Reproduction automatic transmission control bracket for TH400 transmission with console.
1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield
Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...
1964-72 Chevelle, Malibu; Transmission Crossmember; All Models Except Convertible
Reproduction transmission crossmember for 1964-72 Chevrolet Chevelle and Malibu models except Convertible. Manufactured to factory specifications, this steel crossmember supports the transmission and provides proper mounting...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models equipped with a factory center console. Manufactured to factory specifications,...
Reproduction 4-speed shifter handle for 1968-72 Chevrolet Chevelle and El Camino, 1970-72 Chevrolet Monte Carlo, and 1971-72 GMC Sprint models without a factory center console. Manufactured to factory specifications, this...
Brake and Clutch Pedal Bushing Set; Nylon; For 5/8" Diameter Shaft; 5/8" Deep; 4-Piece Set
Reproduction of the commonly worn out nylon pedal bushings for various GM and Ford vehicles. Split nylon flange bushings fit over clutch pedal cross shaft and inside cross shaft sleeve for clutch and brake pedals with 5/8"...
Reproduction clutch bell crank (Z-bar) pivot stud nylon seat and retainer set for 1958-88 Chevrolet, Buick, Oldsmobile, and Pontiac models equipped with a manual transmission. These plastic inserts allow the clutch bell crank...
This is a reproduction speedometer driven gear, identified by both its tooth count and color. Replace your worn out, stripped or damaged original gear or simply use a different gear for speedometer correction when changing...
Swivel assembly for manual transmission shift control linkage, automatic transmission column shift linkage or reverse lockout on a wide variety of GM models from 1938-91. This set includes many of the necessary pieces to...
1962-83 GM Clutch Fork Boot; 3-1/2" x 2-5/8"
OER® reproduction clutch fork bellhousing boot for GM models from 1955 to 1983. This reproduction boot will replace the old or worn out original exactly. Manufactured in quality EPDM rubber compound for durability and...
1968-72 Camaro, Chevelle; Transmission Shift Cable; Auto Trans; with Console; OER
OER® reproduction of the original shift cable designed for use with 1968-72 Camaro and Chevelle models with automatic transmissions. Each cable is manufactured to replace the old or damaged cable assembly. Includes boot...
1953-2010 GM; Rear Axle / Transmission Ventilator; for 3/8" Hole
OER® reproduction of the original style ventilator used by GM on a wide range of applications from the 1950s through present-day cars and trucks. This ventilator is designed for use on rear axle housings, automatic...
1961-79 GM; Transmission Control Cable Grommet; OER
OER® reproduction of the original GM transmission control cable grommet for all 1961-79 GM models. Designed to factory specifications in the correct configuration for a perfect fit and manufactured in rubber as original....
1963-74 Chevrolet; Retainer Clip; for Transmission Back-Up Switch Wire; Cushioned, Insulated
Replacement back-up lamp switch wire harness retaining clip for models with a muncie transmission. This clip mounts the reverse back-up lamp switch wire harness to the bellhousing. This is an exact reproduction of the...