1967-69 Camaro SS; Hood Assembly; Bolt On; Stamped Steel; EDP Coated
Reproduction hood assembly for 1967-69 Chevrolet Camaro Super Sport (350, 396) models. Each hood is manufactured from high-quality stamped steel to original factory specifications, featuring correct body contours and...
1967-69 Camaro, Firebird; Rear Trunk Lid; Coupe; with Pre-Punched Spoiler Holes; EDP Coated
Reproduction of the original trunk lid designed for use on all 1967-69 Camaro and Firebird models. Manufactured in OEM gauge stamped steel, this reproduction features the underside structure with pre-cut spoiler mounting...
1967-69 Camaro; Cowl Top Vent Grill Panel; EDP coated
Reproduction of the original cowl top vent grill panel that was original equipment on 1967-69 Camaro models. This louvered stamped steel component installs directly below the windshield and behind the hood panel. Includes...
1968 Camaro; Front Fender; Standard RH Passenger Side; GM Tooling; Limited Supply
OER® reproduction fenders manufactured from the original GM tooling! Each Restorer's Choice™ reproduction fender will install correctly and is produced using high grade steel. This part features a black...
1968 Camaro RS; Front Fender; Rally Sport; RH Passenger Side; GM Tooling; Limited Supply
OER® reproduction fenders manufactured from the original GM tooling! Each Restorer's Choice™ reproduction fender will install correctly and is produced using high grade steel. This part features a black...
1967-69 Camaro; Stinger Hood Assembly; Stamped Steel; with 2" Cowl Rise; EDP Coated
Aftermarket Stinger hood assembly designed for use with any 1967-69 Chevrolet Camaro, most commonly associated with high-performance Yenko, Baldwin Motion, and COPO models. Manufactured from quality stamped steel to original...
1967-69 Camaro, Firebird; Complete Floor Pan; For Deep Tubs; with Weld-Thru™ Primer
Reproduction of the original floor pan assembly designed for use with 1967-69 Camaro and Firebird models with deep tubs. Add up to 3 inches of clearance per side with our custom deep tub floor pan assembly for 1967-69 models....
1967-69 Camaro, Firebird; Full Floor Pan Assembly; with Silver Weld-Thru™ Coating
Reproduction of the original complete floor pan assembly designed for use with 1967-1969 Camaro, Firebird, and Trans Am models. Each full floor pan is manufactured in stamped steel to original factory specifications,...
1967-68 Camaro; Firebird; Center Trunk Floor Pan; 47-1/4" x 30-1/2"
Reproduction of the original center trunk pan designed for use with 1967-68 Camaro and Firebird models. Each trunk pan is manufactured in quality stamped steel and replicates the original design. Includes correct...
1967-69 Camaro, Firebird; Complete Rocker Panel Assembly; Convertible; LH Driver Side
Stamped steel reproduction of the original complete rocker panel assembly including the inner and outer structure for 1967-69 Camaro and Firebird convertible models. This complete rocker panel features heavy duty...
1967-69 Camaro, Firebird; Rear Trunk Lid; w/o Rear Spoiler Holes; Stamped Steel; EDP Coated
OER Premier reproduction trunk lid is designed specifically for 1967-69 Camaro and Firebird models. Manufactured utilizing all new tooling with OEM gauge steel, this reproduction is the highest quality trunk lid on the market...
1968 Camaro, Firebird; Inner Lower Cowl Panel Assembly; with Air Conditioning; EDP Coated
Quality reproduction of the original cowl panel assembly designed for use on 1968 Camaro and Firebird models. A complete reproduction of the inner portion of the cowl top vent assembly that includes both the upper and lower...
1968 Camaro, Firebird; Inner Cowl Panel Assembly; without AC; EDP Coated
This quality reproduction will replace the inner section of the cowl panel. A complete reproduction of the inner portion of the cowl top vent section. You can now replace your rusted or damaged original with this superb...
1967-68 Camaro / Firebird Deluxe Trunk Sheet Metal Floor Pan Kit with Reinforcements
Reproduction trunk panels are designed and manufactured using original factory specifications giving the finished product a factory original appearance while maintaining originality. The trunk section is often corroded or...
1967 Chevrolet Camaro Convertible; Complete Rear Quarter Panel; RH Passenger Side
Reproduction complete quarter panel for 1968 Camaro convertible models. Each panel is manufactured from high-quality stamped steel to exact factory specifications, providing an authentic fit and finish. Unlike a simple...
1968 Chevrolet Camaro; Complete Rear Quarter Panel; Coupe; RH Passenger Side
Reproduction complete quarter panel for 1968 Camaro coupe models. Each panel is precision-manufactured in quality stamped steel to original factory specifications for an exact fit and appearance. Unlike a simple quarter skin,...
1968 Camaro RS; Front Fender; Rally Sport; with Fender Extension; RH Passenger Side
Reproduction of the original front fender designed for use on 1967 Camaro RS models. This fender is an excellent replacement for your rusted or damaged factory original. Manufactured in high grade stamped steel replicating...
1968 Camaro, Firebird; Inner Front Door Frame; LH Driver Side; EDP Coated
Reproduction inner door frame for 1968 Camaro and Firebird models. Each frame is manufactured in quality stamped steel to factory specifications featuring correct contours and pre-installed door hinge mounting points. For use...
1967-68 Camaro; Front Header Panel; w/o Emblem Holes; EDP Coated
Reproduction of the original front header panel designed for use with 1967-68 Chevrolet Camaro models. Manufactured in high-quality stamped steel to correct factory specifications for a precise fit. This version is offered...
1967-68 Camaro, Firebird; Outer Wheel House Panel; LH, Driver Side; EDP Coated
Reproduction outer wheelhouse panel for 1967-68 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit....
1968 Camaro, Firebird; Complete Dash Panel; with or w/o AC; EDP Coated
Reproduction of the original dash panel assembly designed for use with 1968 Camaro and Firebird models with or without factory air conditioning. Each dash panel is manufactured in quality stamped steel to factory...
1968 Camaro, Firebird; Firewall Panel; Coupe; without Air Conditioning; EDP Coating
Reproduction of the original firewall assembly for 1968 Camaro and Firebird models. Most original firewalls have either been drilled, cut, or rusted out. This reproduction firewall panel eliminates those issues and features...
1967-68 Camaro / Firebird Basic Trunk Sheet Metal Floor Pan Kit without Reinforcements
Reproduction trunk panels are designed and manufactured using original factory specifications giving the finished product a factory original appearance while maintaining originality. The trunk section is often corroded or...
1967-69 Camaro, Firebird; Complete Outer Rocker Panel; Coupe: RH Passenger Side
Reproduction of the original outer rocker panel designed for use with 1967-69 Camaro and Firebird models. The rocker panels install directly below the door between the front and rear wheel well openings. This full outer...
1967-69 Camaro, Firebird; Front Floor Pan; Partial; LH Driver Side; EDP Coated
Reproduction of the original front floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the front floor pan area with this quality stamped steel reproduction. Each...
Reproduction of the original upper inner cowl panel designed for use with 1968-69 Camaro, Firebird models and 1968-74 Chevy II, Nova and GM X-Body models. Each panel is manufactured in stamped steel to original factory...
1967-68 Camaro, Firebird; Inner Roof Panel Brace Set; 13 Piece Set; EDP Coated
Correct reproduction of the original inner roof panel braces designed for use with 1967-68 Camaro and Firebird coupe models. Each brace is manufactured in stamped steel to original factory specifications featuring correct...
1967-68 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; RH Passenger Side
Reproduction of the original lower side drop down panel designed for use with 1967-68 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...
1968-69 Camaro, Firebird; Frame Rail; for Mini Tubs; RH Passenger Side; Weld-Thru&trade Primer
Add up to 3" inches of clearance per side with our custom deep tub components. Manufactured to replicate the look of the original frame rail assemblies while providing the additional clearance needed for wider tires. These...
1967-68 Camaro; Front Lower Valance Panel; Base, SS, Z28 Models; EDP Coated
High-quality reproduction front valance panel designed for 1967-68 Chevrolet Camaro standard, SS, Z/28, and base models. This OE-style replacement is stamped from durable automotive-grade steel and engineered to replicate...
1967-69 Camaro, Firebird; Rear Floor Pan; Partial; RH Passenger Side; EDP Coated
Reproduction of the original rear floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the rear floor pan area with this quality stamped steel reproduction. Each...
1967-68 Camaro, Firebird; Inner Lower Cowl Panel; EDP Coated
Reproduction of the lower inner cowl panel for 1967-68 Camaro and Firebird models. Manufactured in quality stamped steel to correct factory dimensions. Features factory-style contours, pre-punched holes, correctly made...
1967-69 Camaro, Firebird; Rear Floor Pan; Partial; LH Driver Side; EDP Coated
Reproduction of the original rear floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the rear floor pan area with this quality stamped steel reproduction. Each...
1967-68 Camaro; Rally Sport; Rear Body Panel; EDP Coated; Premium Quality
Reproduction rear body panel for 1967-68 Chevrolet Camaro Rally Sport models. Manufactured from premium-quality tooling to ensure clean lines, precise contours, and an authentic factory appearance. This panel includes...
1967-69 Camaro, Firebird; Inner Wheel House Panel; RH Passenger Side
Reproduction of the original inner wheelhouse panel designed for use with 1967-69 Camaro and Firebird models. Each wheelhouse panel is manufactured in stamped steel to original factory specifications featuring correct...
1967-69 Camaro, Firebird; Floor Pan Set; Front to Rear; RH & LH; Pair; EDP Coated
Reproduction of the original style floor pans designed for use with all 1967-1969 Camaro and Firebird models. Each floor panel is manufactured in stamped steel to correct factory specifications for an authentic fit and...
1967-69 Camaro, Firebird; Outer Rocker Panels; Coupe; RH & LH; Pair
Reproduction of the outer rocker panels for use on 1967-69 Camaro and Firebird models. The rocker panels are manufactured in stamped steel replicating the original in appearance and fitment. Installs directly below the door...
1967-68 Camaro 1967 Firebird; Front Fender Extension; LH Drivers Side
Reproduction of the original LH (driver side) front fender extension for 1967-68 Chevrolet Camaro and 1967 Pontiac Firebird models. Each extension is manufactured in high-quality stamped steel to OEM specifications,...
Replace your rusted or damaged cowl side panel with this quality reproduction. This panel installs behind the fender at the side of the firewall. Made in USA. Features and Benefits: Authentic reproduction cowl side panel...
1967-69 Camaro, Firebird; Outer Rocker Panel; Coupe; Slip-on Style; RH Passenger Side
Reproduction of the original style outer rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...
1967-69 Camaro, Firebird; Under Floor Main Brace; Convertible; EDP Coated
Quality reproduction of the original under floor main brace for use with 1967-69 Camaro and Firebird convertible models. Each under floor brace is manufactured in stamped steel to original factory specifications featuring...
1967-69 Camaro, Firebird; Inner Rocker Panel Assembly; Coupe; with EDP Coating; RH Passenger Side
Stamped steel reproduction of the original inner rocker panel for 1967-69 Camaro and Firebird coupe models. This panel installs under the door behind the outer rocker panel and between the wheel wells. This part features a...
1968 Camaro, Firebird; Complete Wheelhouse Panel; Stock Width; Coupe; LH Driver Side
Reproduction of the original wheelhouse panel assembly for use with 1968 Camaro and Firebird models. When doing a complete restoration there is no longer a need to weld together the inner and outer wheelhouse panels to form...
1967-69 Camaro, Firebird; Partial Outer Rocker Panels; Coupe; RH & LH; Pair
Reproduction of the original style outer rocker panels designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...
1967-69 Camaro, Firebird; Upper Rear Body Panel; Coupe; w/o Outer Lip; EDP Coated
Correct reproduction upper rear body panel for 1967-69 Camaro and Firebird models. Each rear body panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...
1968-69 Camaro, Firebird; Inner Wheel House Panel; LH Drivers Side
Reproduction of the original inner wheelhouse panel designed for use with 1968-69 Camaro and Firebird models. Each wheelhouse panel is manufactured in stamped steel to original factory specifications featuring correct...
1967-69 Camaro, Firebird; Outer Rocker Panel; Coupe; Slip-on Style; LH Driver Side
Reproduction of the original style outer rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...
1967-68 Camaro, Firebird; Rear Inner Valance Crossrail Panel; EDP Coated
Reproduction inner sheet metal extension for 1967-68 Camaro and Firebird models. Each rear inner crossrail panel is manufactured from high-quality stamped steel to original factory specifications, featuring correct contours...
1967-69 Camaro, Firebird; Bucket Seat Frame Floor Support; LH Drivers Side
Reproduction of the original seat frame floor support designed for 1969 Camaro and Firebird coupe and convertible models. Each panel is manufactured in stamped steel to original factory specifications. Replaces the area under...
1967-69 Camaro, Firebird; Partial Inner Rocker Panel; LH Driver Side; EDP Coating
Reproduction of the original inner rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...
1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; LH Driver Side
Correct reproduction of the original pillar drip rail support that installs on the front pillar section of the roof panel and extends downward vertically between the roof panel and fender. This reproduction is essential when...
1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; RH Passenger Side
Correct reproduction of the original pillar drip rail support that installs on the front pillar section of the roof panel and extends downward vertically between the roof panel and fender. This reproduction is essential when...
1967-69 Camaro, Firebird; Underseat Floor Brace / Torque Brace; RH Passenger Side
Reproduction of the original underseat leaf spring bracket brace for use with 1967-69 Camaro and Firebird models. Each brace is manufactured from high-quality stamped steel to OE factory specifications, featuring accurate...
1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; RH & LH; Pair
Correct reproduction of the original pillar drip rail support designed for use with 1967-1969 Camaro and Firebird coupe models. Each pillar drip support is manufactured in stamped steel to original factory specifications...
1967-79 Camaro, Firebird, 69-79 Nova, GM X Body; Outer Cowl Side Panel; LH; Drivers Side; EDP Coated
Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...
1967-69 Camaro, Firebird; Under Rear Seat Floor Brace; LH Drivers Side; EDP Coated
Correct reproduction of the original under rear seat brace for use with 1967-1969 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...
Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"
Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...
Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"
This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....
1961-69 GM; Floor Pan Metal Plug; Oval; With Weld Holes; With Notches
Reproduction oval floor pan metal plug for various 1961-1969 GM models. This plug installs in the floor pan and trunk floor pan to seal factory oval access openings. Features the correct oval shape with notches and weld holes...