1967-69 Camaro, Firebird; 1968-74 Nova; Lower Control Arms; Pair
Reproduction of the original style lower control arms designed for use with various GM models including 1967-69 Camaro, Firebird, 1968-74 Chevy II, Nova, 1973-74 Pontiac Ventura, Buick Apollo, and Oldsmobile Omega models....
1967-72; Chevy, GMC C10, C15; Frame Rebuild Starter Kit; with Factory Holes; OE Style; 8 Piece Set
Reproduction LH and RH frame rail set featuring factory-style holes for mounting OE-style brackets, crossmembers, and other original components in their correct factory locations. This high-quality set includes six of the...
1968 Camaro, Chevy II Nova, Firebird; Subframe Assembly; OEM Style; without Trans Crossmember
Why waste money trying to repair a damaged subframe that may be compromised internally when you can replace it with this high quality Restorer's Choice reproduction. This reproduction subframe assembly is engineered to...
1968 Camaro, Firebird, Chevy II, Nova; Subframe Assembly; with TH400 Crossmember ; OEM Style
Reproduction of the original complete subframe assembly designed for use with 1968 Camaro, Nova, and Firebird models equipped with TH400 crossmembers. Instead of repairing a damaged or internally compromised factory subframe,...
1955-81 GM; Leaf Spring U-Bolts; 3-1/4" wide x 6-3/4" long; Fits 3-1/4" Axle Tubes; Pair
Replacement OE style U bolts and nuts for rear leaf springs from OER. Designed to secure the leaf spring pack to the rear axle with factory correct strength and reliability. Each set includes heat treated Grade 8 nuts and...
1967-69 Camaro, Firebird; Mono Rear Leaf Springs; Convertible; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models models. Each leaf spring is manufactured to factory specifications and replicates the original in quality, design, and...
1967-69 Camaro, Firebird, 1968-79 Nova; Mono Rear Leaf Springs; Pair; Made in the USA!
Reproduction of the original mono rear leaf springs designed for use with 1967-69 Camaro, Firebird models, and 1968-79 Chevy II, Nova, and X-body models. Each leaf spring is manufactured to factory specifications and...
1963-70 Chevy and GMC Truck; Tubular Lower Control Arms; Pair
Replacement tubular lower control arms for 1963-70 Chevrolet and GMC 1/2 Ton C10 pickup, panel, and Suburban models. Includes both RH and LH lower control arms with cross shafts, bushings, and ball joints pre-installed. Each...
Replace the sagging leaf springs on your classic GM vehicle with this high quality set produced by OER. These replacement rear leaf springs are engineered to directly replace the original multi leaf spring set while...
1963-70 Chevy and GMC C10 Truck; Tubular Upper Control Arms; Pair
Replacement style tubular upper control arms for 1963-70 Chevrolet and GMC truck models. These upper control arms are manufactured from heavy gauge tubular steel. Each control arm is finished in black powdercoat for an...
1959-81 GM; Coil Spring Spacer; 9/16" Thick; EPDM Rubber; Each
Reproduction of the original 9/16" coil spring spacer designed for use on various GM models. Manufactured from durable EPDM rubber, this spacer was originally installed to correct uneven ride height on vehicles that did not...
1963-70 Chevrolet C10; Tubular Control Arm Set; Coil Over Type; Upper and Lower
Gain 21st century handling in your classic Chevy C10 truck. This is an upper and lower front tubular control arm set for conversion to coil-over shocks. Each set includes upper and lower tubular control arms, and upper...
1967-69 Camaro; Firebird; Complete Front End Suspension Rebuild Kit
This complete kit includes a comprehensive assortment of components engineered to renew deteriorated original front suspension parts, restoring smooth ride quality, improved steering response, and dependable handling. Each...
1965-68 Impala, Bel Air, Biscayne, Caprice; Front End Suspension Rebuild Kit
1965-68 Chevrolet Impala front end rebuild kit offering nearly everything required to restore a worn out suspension system. This comprehensive assortment of components is engineered to renew aged factory parts, improving ride...
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1967-69 Camaro, Firebird; 1968-74 Nova; Upper Control Arms; Pair
Reproduction upper control arms for various GM models including 1967-69 Camaro, Firebird, and 1968-74 Chevy II, Nova models. These reproduction upper control arms includes pre-installed bushings, shafts and ball joints. If...
1968-74 Nova, Ventura, Apollo, Omega; Front End Suspension Rebuild Kit; Outer Tie Rod Ends Only
This kit includes a comprehensive assortment of front end components engineered to renew worn out original suspension parts. Designed to restore proper handling, improve steering stability, and reduce uneven front tire wear,...
1967-69 Chevrolet Camaro; Front End Suspension Rebuild Kit; with Outer Tie Rod Ends Only
Comprehensive front end rebuild kit offering nearly everything required to restore a worn out or aging suspension system. This complete assortment of components is engineered to replace deteriorated factory parts, improving...
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Commonly referred to as a trailing arm, this component mounts between the rear axle housing and the center...
1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; LH Driver Side; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...
1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Rear Control Arm; RH Passenger Side; EDP Coated
Quality reproduction rear control arm for 1960-72 Chevrolet and GMC truck models equipped with rear coil springs. Also known as a trailing arm, this component mounts between the rear axle housing and the center crossmember to...
Reproduction lower control arm bushings for 1955-64 Chevrolet Bel Air, Impala, Corvair, and Full Size models. Each bushing is manufactured to factory specifications. Add new life to your suspension by replacing the old...
1967-69 Camaro, Firebird; Rear Shock Upper Mounting Plate; Pair
One of the most commonly rusted, damaged, or accidentally discarded items in the rear suspension is the rear upper shock mount plate. This plate installs between the upper shock bushings and bolts to the factory weld nuts...
1964-74 Chevy, Pontiac, Oldsmobile; Lower Control Arm Bolt; 1/2"-13 x 3-3/4"; Each
OER reproduction bolt used to install the lower control arms on various GM models. Fits front lower control arms. The bolts are made from high strength grade 8 steel which as been formed and thread rolled to exact OE specs...
1970-72 Buick Skylark, GS 455, GS; Chassis & Suspension; Hardware Bolt Kit; OEM
This is a 129 piece kit it includes all the bolts needed to attach your suspension & steering to the frame for 1970-72 Buick Skylark, GS and GS 455 models. Includes brake line and fuel line "clamp bolts" as well as...
1968-69 Camaro, Firebird, 1968-79 Nova, X Body; Lower Rear Shock Mount Bolt; Each
Reproduction of the lower rear shock mounting bolt for 1968-1969 Camaro and Firebird models, as well as 1968-1979 Nova, 1971-1977 Ventura, 1973-1980 Omega, 1973-1975 Apollo, and 1975-1980 Skylark models equipped with multi...
1962-69 Chevy II Nova 1967-69 Camaro Firebird; Sway Bar Bushings; Original Design
Reproduction of the original sway bar bushings designed for use with 1962-69 Chevy Nova, 1967-69 Camaro and Firebird models. Each bushing is manufactured in quality EPDM rubber replicating the original in design, dimensions,...
Replacement sway bar designed to reduce body roll, under steer, and over steer during cornering, resulting in improved vehicle handling, control, and driving confidence. Engineered to enhance stability without negatively...
1963-70 Chevy Pickup, Blazer, Suburban; Van; Upper Control Arm; C10; Passenger Side
Reproduction of the original upper control arm designed for use with 1963-70 Chevrolet and GMC Pickup, Suburban, Panel Truck, Crew Cab, Blazer and Jimmy 1/2 ton, 2 wheel drive models. Also fits 1970 Chevrolet G10/G20 Van, and...
1967-69 Camaro, Firebird, 1968-74 Nova; Lower Tubular Control Arm Set; RH & LH; Pair
Enhance the handling performance of your 1967-69 Camaro, Firebird, or 1968-74 Nova with these high quality tubular lower control arms. Stronger and lighter than factory arms, these tubular replacements provide improved...
1967-81 Camaro, Firebird; Rear Shock Extension; Fine Thread; Pair
OER rear shock extenders for 1967-1981 Camaro and Firebird models. These extenders increase rear shock length by 2" and are specifically designed for use when converting from mono leaf springs to multi leaf springs. By...
1965-70 Impala, Caprice, Bel Air; Upper Tubular Control Arms; RH & LH; Pair
These tubular upper control arms are engineered for maximum strength, durability, and visual impact. Designed as direct stock replacements, they provide a clean, upgraded appearance while offering significantly improved...
1963-72 Chevy, GMC C10, C15 Pickup, Suburban; Rear Sway Bar; 1" diameter; with Hardware
Sway bar kit for Chevrolet and GMC truck, pickup, and SUV models. These 1" sway bars reinforce the suspension to deliver improved handling, stability, and overall control. Designed for easy installation using basic hand...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/8" diameter bar. This versatile sway bar fits a wide range of GM vehicles including Buick Skylark and Special,...
1967-69 Camaro, Firebird; 68-74 Nova; Front Sway Bar; Silver Zinc Finish; 13/16"
Reproduction of the original design front sway bar for 1967-69 Camaro, Firebird and 1968-74 Chevy II Nova models. This silver zinc plated sway bar is compatible with factory mounting brackets. Measures 13/16" in diameter and...
1970-81 Camaro, Firebird; Front Sway Bar; with WS6 Suspension; 1-1/4"
Reproduction of the original factory style 1-1/4" front sway bar designed for use with 1970-81 Camaro and Firebird models with WS6 suspension. This silver zinc plated sway bar is compatible with factory mounting brackets....
This reproduction disc brake spindle set is designed for a wide range of GM muscle car models, including 1967-1969 Camaro and Firebird, 1968-1974 Nova and other X body vehicles, as well as 1964-1972 Chevelle and additional A...
Front sway bar for various 1964-1981 Buick, Chevrolet, Pontiac, and Oldsmobile models equipped with a 1-1/4" diameter bar. Engineered to significantly reduce body roll, under steer, and over steer during cornering, this...
Reproduction front crossmember for 1967-72 Chevrolet and GMC C10 pickup truck models. Each crossmember is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance...
1970-81 Camaro, Firebird; Front Sway Bar; 1-1/16"; High Performance; LS5, LS6
Reproduction of the original factory style 1-1/16" front sway bar designed for use with 1970-81 Camaro and Firebird models including various 1964-72 Chevrolet, Buick, Olds, and Pontiac models with high performance suspension...
Enhance the handling performance of your 1964-72 GM A-Body model with tubular control arms. These arms are not only stronger and lighter weight than the factory arm, they also feature improved suspension geometry for enhanced...
1968-69 Camaro, Firebird; Mono To Multi Leaf Conversion Hardware Kit; with 3-1/2"" U Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
1968-69 Camaro, Firebird; Mono To Multi Leaf Conversion Hardware Kit; with 3" U Bolts & T Bolts
Converting your original mono rear leaf springs to multi leaf is no sweat with this conversion kit. Many models came equipped with mono leaf springs, but changing over to a multi leaf setup will allow better rear axle control...
1967-69 Camaro, Firebird, Nova; Rear Axle Pinion Rubber Bumper, Each
OER reproduction rear axle pinion bumper for 1967 Camaro and Firebird (2nd design), 1968-1969 Camaro and Firebird models, and 1968-1969 Chevy II and Nova. Manufactured from high quality molded rubber, this bumper accurately...
1968-81 Camaro, Firebird, Nova; Rear Sway Bar Anchor Plate Bolt; 7/16"-20 X 1-5/16"
Bolt and nut used to attach the rear sway bar bracket to the lower anchor plate and leaf spring perch. This case hardened bolt measures 7/16"-20 x 1-5/16" and is designed for models equipped with standard suspension. 4 bolts...
1968-72 Chevelle, Skylark, Cutlass, GTO; Control Arm; Rear Upper W/Polyurethane Bushings
Reproduction of the original rear upper control arm for use with various 1964-67 GM models including Chevelle, GTO, Cutlass. Each arm is manufactured in reinforced stamped steel replicating the original configuration, design,...
Mustang II Top Spring Hat Set; For Weld-In Mustang II Front Suspension Conversion
Universal weld-in Mustang II upper crossmember spring hat set designed to be used when converting your vehicle to Mustang II style front suspension. Produced in heavy duty steel, tig-welded, and ready for you to weld into...
Reproduction rear upper trailing arms for 1968-72 A-Body GM vehicles. These brand new rear trailing arms are exact reproductions of the original arms featuring bushings in the stock locations and factory original specs for...
1964-69 Camaro, Chevelle, Nova, Firebird; Front Sway Bar Brackets; Pair
Reproduction of the original style U-shaped sway bar bushing clamps designed for use on various 1967-69 GM models. These factory correct reproductions are used to hold the inner sway bar bushings and the sway bar to the...
1963-96 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Lower Control Arm Shaft Kit; 2 Wheel Drive
Reproduction control arm shaft kit, precision engineered and rigorously tested to provide a dependable replacement for the original equipment shaft. Designed as a direct fit component, this shaft installs and functions...
1968-74 Chevy II, Nova, X-Body; Rear Shock Tower Support Panel; RH Passenger Side
Reproduction of the original rear shock tower support panel for use with all 1968-74 Chevy II, Nova, and X-body models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours...
1958-64 Impala, Bel Air, Biscayne, 1965-82 Corvette; Lower Control Arm Shaft; LH or RH; Each
Quality reproduction lower control arm cross-shaft for various 1958-1964 Chevrolet Impala, Bel Air, Biscayne, and 1963-1982 Corvette models. Each shaft is manufactured from high quality stamped steel and built to original...
1967-69 Camaro, Firebird; Rear Shock Reinforcement Plate
Reproductions of the original rear shock mount reinforcement plate for 1967-69 Camaro and Firebird models. This die stamped, heavy steel plate mounts to the trunk floor and has features two threaded holes.Comes with black EDP...
1958-64 Impala, Bel Air, Biscayne, El Camino; Lower Control Arm Plate Set; with Screws and Washers
Reproduction of the original lower control arm plate for use with 1958-64 Chevrolet Impala, Bel Air, and Biscayne models. Each set includes a forged lower control arm plate with Grade-8 screws and washers. 2 sets required per...
Reproduction control arm shaft kit, precision engineered and rigorously tested to deliver a dependable replacement for the original equipment shaft. Designed as a direct replacement, this component fits and functions exactly...
1968-69 Camaro, Firebird, 1968-79 Nova; Multi Leaf Spring Pad Set; 4 Piece Set
Each pad is designed to insulate the contact area between the leaf spring and the mounting plate, preventing metal to metal contact that can lead to noise, vibration, and premature wear. These pads help maintain proper...
1962-87 Buick, Chevrolet, Pontiac, Olds; Ball Joint Rivet Bolt Set; 24 Piece Set; Various Models
This rivet style bolt set attaches the ball joint to the upper control arm while providing the authentic appearance of factory installed rivets. Each bolt features a serrated locking rivet style head that prevents spinning...
1963-72 Chevy, GMC Pickup; C10; C20; C30; Bracket Set; Front Sway Bar to Frame; Stock Height
These 1963-72 front sway bar to frame brackets are designed for a factory/stock height pickup. For trucks with air bag suspension we also recommend using stock height brackets. Sold as a pair to fit LH and RH side of the...
This lowered front sway bar bracket set will provide more ground clearance and is recommended for trucks lowered 3" or more. The brackets pull the bar up towards the frame to achieve additional ground clearance. For trucks...
1964-72 Various GM Vehicles Chevelle, GTO, Cutlass; Shim/Bolt Kit; Rear Sway/Stabilizer Bar
New OEM rear sway bar for 1964-72 GM applications. Reproduction rear stabilizer/sway bar bolt and shim kit for various 1964-72 GM vehicles Which includes GTO, Cutlass, Skylark and Chevelle. See vehicle fitment for all...