Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...
1967-68 Camaro, 1968 Chevelle, El Camino; Headlight Bezel Nut Set ; Set of 10
Reproduction of the original style barrel nuts designed for use on 1967-68 Camaro models. These unique barrel shaped plastic insert nuts press into the steel frame and provide a secure anchor for the trim screws. These...
1968 Camaro; Rally Sport Outer Headlight Door Cover; with Chrome Trim; LH Driver Side
Correct reproduction of the original headlamp return cover (outer door) installed on all 1968 Camaro Rally Sport models. Manufactured in quality injection molded ABS replicating the original in quality and design. This return...
1968 Camaro; RS Headlamp Bell Crank Spring and Bracket Set ; 8 Piece Set
Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...
1965-75 Impala / Full Size Headlamp Adjuster Screw And Nut Set
Reproduction of the headlamp adjusting hardware required for 1965-75 Impala, Biscayne, Bel Air and Caprice, as well as a variety of additional GM applications. This adjustor set contains the hardware required for proper...
1965-80 Chevrolet, GMC Car & Truck; Headlight Adjuster Set; 8 Piece Set; Various Models
The correct hardware will make your headlight adjustment hardware installation easier. Includes appropriate hardware for adjusting the headlamp. See applications below. Set includes adjusters for both driver and passenger...
1/4"-28 GM Headlamp Adjuster Nylon Nut
This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...
1967-69 Camaro; Rally Sport; Headlight Hinge Bolt Set; Short; Set of 3
Reproduction of the original one-piece, shouldered stud headlight bolts designed for use on 1967-69 Rally Sport Camaros. This set includes 3 hinge bolts which are used to mount the control opening hinge to the control arm...
1968 Camaro; Rally Sport Outer Headlight Door Cover; with Chrome Trim; RH Passenger Side
Correct reproduction of the original headlamp return cover (outer door) installed on all 1968 Camaro Rally Sport models. Manufactured in quality injection molded ABS replicating the original in quality and design. This return...
1967-68 Camaro RS; Headlamp Door Screw Set; 8 Piece
Reproduction of the correct screw set designed to install the black outer headlamp door to the rear headlamp backing plate. Manufactured in black oxide that matches the original GM screw, this phillips head reproduction is...
1968-69 Camaro; Raly Sport Headlight Vacuum Relay Valve Assembly
Quality reproduction of the original GM headlight relay switch assembly designed for use on 1968-69 Chevrolet Camaro models with Rally Sport (hidden headlight) option. The relay works with the headlight switch on RS models to...
1968-69 Camaro; Rally Sport Headlamp Pin & Clevis Set
Reproduction of the original pin and clevis set designed for use with 1968-69 Camaro RS models with hidden headlamps. The pin and clevis is required to hold the headlight vacuum actuator to the bracket. This is a high quality...
1968 Camaro; Rally Sport Headlight Actuator Bracket; Large, Rear; LH Driver Side
Reproduction of the original headlight actuator support bracket designed for use with 1968 Camaro models with the Rally Sport (hidden headlight) option. This bracket supports the rear portion of the headlamp actuator canister...
1968-69 Camaro; Rally Sport Headlight Bushing Set; 22 Piece Set
Reproduction of the original bushings needed when rebuilding or adding a Rally Sport grill assembly (concealed headlamps). If your rebuilding a 1968-69 Rally Sport headlamp assembly, then you'll want to replace the upper and...
1967-68 Camaro RS; Headlamp Door Molding Rivets; 10 piece set
Reproduction of the original headlamp door molding hardware for use on 1967-68 Camaro RS models. These original style reproduction rivets fasten the outer headlamp door molding to the headlamp door. 5 rivets required per side...
Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set
Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...
Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;
Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...
1968-69 Camaro RS Headlamp Vacuum Actuator; with Concealed Headlights; Each
Superb quality reproduction of the original headlamp vacuum canister designed for use on all 1968-69 Camaro models that included concealed headlamps. Each actuator is manufactured to exact factory specifications ensuring a...