1968 Camaro; Rally Sport Headlight Door Assembly; with Black Door; LH Driver Side
Reproduction of the original front headlamp door assembly for the drivers side on 1968 Rally Sport Camaro. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are designed to fit Rally...
Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"
Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...
Reproduction of the original chrome side marker lamp bezel designed for use with various 1968-69 Chevrolet models as listed below. Manufactured in die-cast zinc and chrome plated to match the original in quality and design....
1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut
Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...
OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...
1940-1974 Chevrolet; Headlamp Mounting Bucket; Each
Reproduction of the original headlamp mounting bucket designed for use on various GM models. This headlight bucket keeps the headlamp beam in position once installed. The headlamp bucket attaches to the headlamp housing using...
1962-1974 Chevrolet; Headlamp Mounting Bucket ; Each
Reproduction headlamp mounting bucket for various GM models. This headlight bucket keeps the headlamp beam in position once installed. The headlamp bucket attaches to the headlamp housing using adjustment screw and nut...
1968 Chevrolet Camaro; Standard Headlamp Bezel; LH Driver Side
Superb OER® reproduction headlamp bezel for all 1968 Camaro models with standard grill (non-RS). Each bezel is manufactured in quality stamped aluminum and features a correctly colored flat black finish matching the...
1968 Camaro RS Tail Light Bezel; RH Passenger Side
Show quality reproduction of the original die-cast tail lamp bezel designed for use on all 1968 Camaros. Each bezel is a high quality reproduction of the original and includes the correct outer chrome trim and matte black...
1967-68 Camaro; Headlamp Bezel; with Rally Sport; RH Passenger Side
OER® reproduction of the original Rally Sport front headlamp bezel designed for use with 1967-1968 Camaro Rally Sport (hidden headlights) models. Each headlamp bezel is manufactured in quality stamped aluminum replicating...
1968 Camaro RS Tail Light Bezel ; LH Drivers Side
Show quality reproduction of the original die-cast tail lamp bezel designed for use on all 1968 Camaros. Each bezel is a high quality reproduction of the original and includes the correct outer chrome trim and matte black...
1955-87 Chevrolet, GMC, Pontiac; Glove Box Lamp Assembly; with Socket and Wiring
Replace your original glove box lamp with this correct service replacement for 1955-72 GM models. Features correct orange color coated wire, lamp, socket, housing, and switch. Includes short red lead for early applications...
1967-68 Camaro Rally Sport; Park Lamp Lens; Pair
Reproduction of the original park lamp lenses designed for use with all 1967-68 Rally Sport Camaros (with hidden headlights). Each lens is injection molded and manufactured to exact factory specifications using clear acrylic...
1968 Camaro; Standard Tail Light Lens; with GM Markings; except RS; RH or LH; Each
OER® reproduction of the original tail lamp lens designed for use on 1968 standard Camaro models. Lens is manufactured with quality injection-molded UV acrylic material replicating the original in every detail. Lens...
1967-72 Chevy, GMC Pickup, Blazer, Jimmy; Tail Lamp Assembly; with Wiring; LH or RH; Each
Reproduction Chevrolet or GMC truck tail lamp assembly for 1967-72 Chevrolet Fleetside pickups, GMC Fleetside pickups, 1969-72 Blazer and 1970-72 Jimmy models. Each tail lamp assembly features the tail light lens, a pre-wired...
1964-73 GM; License Lamp Lens; with GM Markings; Various Models
Reproduction of the original license lamp lens designed for use on 1967-69 Camaro and various other GM models. Produced in UV stable acrylic material for clarity, and features the correct "Guide" and SAE markings for complete...
1967-68 Camaro, 1968 Chevelle, El Camino; Headlight Bezel Nut Set ; Set of 10
Reproduction of the original style barrel nuts designed for use on 1967-68 Camaro models. These unique barrel shaped plastic insert nuts press into the steel frame and provide a secure anchor for the trim screws. These...
1968 Camaro RS; Tail Lamp Lens; With GM Markings; LH or RH
OER reproduction tail lamp lens for 1968 RS Camaro models. On RS models, the back up lamps are not part of the tail lamp assembly. Backup lamps are located below the rear bumper in the rear body panel. This is the longer RS...
Reproduction RH tail lamp housing for 1968 Chevelle and Malibu models. This die cast housing is manufactured to factory specifications for an authentic fit and original appearance. Features a light gray primer finish and...
1968 Camaro; RS Headlight Door Assembly; Black Door with Chrome Accents; RH Passenger Side
Reproduction of the original front headlamp door assembly for the passenger side on 1968 Rally Sport Camaro. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are designed to fit...
1968 Camaro; RS Headlight Door Assembly; Black Door with Chrome Accents; LH Driver Side
Reproduction of the original front headlamp door assembly for the drivers side on 1968 Rally Sport Camaro. Each headlamp assembly comes completely assembled and ready to install. Headlight assemblies are designed to fit Rally...
Headlamp Sealed Beam; 12 Volt; High Beam; 5-3/4" Round; Halogen
Replacement sealed beam halogen headlamp for your burned out original. This halogen bulb is just what you need to keep your headlamps operational and up to date with modern day lighting.
1968-69 Camaro Rally Sport; Rear Lower Actuator Bracket; Each
Reproduction of the original rear lower actuator bracket designed for use on 1968-69 Camaro RS models. There are two actuator brackets needed to mount the actuator. This is the smaller of the two brackets. This bracket is...
Complete set of reproduction front fiber optic vigilite lamp monitoring fender bezels, lenses and rubber insert RPO U46 option. These fit 1968-69 Camaro, 1967-70 Chevelle and El Camino and 1970 Monte Carlo. The bezels have...
1960-72 Chevy, GMC Pickup, Blazer, Jimmy, Suburban; Dome Lamp Lens; Each
Reproduction dome lamp lens for 1960-72 Chevrolet and GMC Pickup, Blazer, Jimmy, and Suburban models. Each lens is manufactured to exact factory specifications replicating the original in design, appearance, and fitment. Dome...
1968 Impala, Caprice; Headlamp Bezel; Chrome; LH Driver Side
Reproduction front headlamp bezel for 1968 Chevrolet Impala, Caprice, Bel Air, and Biscayne models. Manufactured in quality die-cast zinc featuring a bright chrome plated finish to replicate the original in quality,...
Reproduction tail lamp bezels for 1968-69 El Camino and Chevelle Station Wagon models. These chrome plated die cast bezels are manufactured to factory specifications for an authentic fit and original appearance. Features...
1967-72 Chevy, GMC Pickup, Van, Blazer. Jimmy; Back-Up Lens; LH Driver Side
Reproduction of the original rear back-up lamp lens designed for use on 1967-72 Fleetside pickup trucks, 1969-72 Blazer, and 1970-72 GMC Jimmy models. Each lens is manufactured in injection molded clear acrylic ABS lens...
1968-69 Chevy II, Nova; Rear Tail Lamp Assembly; LH Drivers Side
Reproduction of the original tail lamp assembly designed for use with 1968-69 Chevy II and Nova models. Manufactured to original OE specifications featuring an outer chrome bezel with an injection molded red tail lamp and a...
1967-72 Chevy, GMC Pickup, Van, Blazer. Jimmy; Back Up Lens; RH Passenger Side
Reproduction of the original rear back-up lamp lens designed for use on 1967-72 Fleetside pickup trucks, 1969-72 Blazer, and 1970-72 GMC Jimmy models. Each lens is manufactured in injection molded clear acrylic ABS lens...
1967-68 Camaro; Lens to Housing Back Up Lens Gaskets; with RS ; Pair
Reproduction of the original back up lamp gaskets for use on 1967-68 Camaro Rally Sport models. This gasket installs between the back up lamp housing and lens assembly. Gaskets install on the back-up lamps located on the rear...
1968 Chevy II Nova; Standard Headlamp Bezels; With Hardware
Reproduction 1968 Chevy II/Nova standard style headlamp bezels manufactured in die-cast zinc same as original. Features the correct paint scheme for standard models replicating the original style bezels. Replace unsightly...
1967-68 Camaro RS; Back Up Lamp Housing; Rally Sport; RH Passenger Side
Reproduction back up lamp housing for 1967-68 Camaros with the Rally Sport option. This complete assembly will replace the lower back up lamp housing for the passenger side. Includes correct polished chrome housing, bulb...
1956-71 T T-3 Logo Headlamp Bulbs; 7" Diameter; LH and RH; Pair
Authentic reproduction T T-3 headlamp bulbs are just what you'll need to complete your restoration! These high quality reproduction sealed beams feature the correct "T T-3" lens design for 1961-71 models and can be used as...
1968 Camaro; Standard Park Lamp Lens; RH or LH; Each; GM Licensed
Reproduction of the original standard park lamp lens designed for use on 1968 Camaro models. Each reproduction park lamp lens is injection molded using quality acrylic clear lens material. Features correct SAE and factory...
1958-82 Chevy, GMC, Pontiac; Headlamp Mounting Bucket; Inner; with Square Hole; Various Models
Reproduction of the original "square-hole" style mounting bucket designed for use on various 1958-82 GM models. The mounting bucket is designed to allow adjustment of the headlight beam on various 5-3/4" round quad headlamp...
1968 Camaro; Rally Sport Outer Headlight Door Cover; with Chrome Trim; LH Driver Side
Correct reproduction of the original headlamp return cover (outer door) installed on all 1968 Camaro Rally Sport models. Manufactured in quality injection molded ABS replicating the original in quality and design. This return...
1967-72 Chevy, GMC Fleetside, Blazer, Jimmy; Back Up Light Assembly; RH Passenger Side
Reproduction back-up lamp assembly for 1967-72 Chevrolet and GMC Fleetside pickup models, and 1969-72 Blazer and Jimmy models. This back up lamp assembly is manufactured to correct factory specifications and features the...
1968 Camaro; Rally Sport Headlight Actuator Shields; RH & LH; Pair
OER® reproduction of the original headlight shields used to protect the vacuum actuators from damage. Each shield is manufactured in quality injection-molded ABS to correct factory specifications. Keep your actuators...
LED front side marker lamp assembly for 1968-1972 pickup, Blazer, Jimmy and Suburban models. Each lens features an amber polycarbonate lens with super bright LEDs, fully sealed, epoxy coated electronics and a pigtail...
1955-68 Chevrolet, 1965-67 Olds; Dome Lamp Lens; Round; White; 3-3/4" Dia.
Reproduction dome lamp lens designed for use with 1955-68 Chevrolet full size models. Originally installed in 1956-57 Chevrolet hardtops, 1955-68 Chevrolet full size sedans, and 1965-68 Chevrolet full size station wagons....
1968 Camaro, Nova; Front & Rear Side Marker Lamp Kit
Replace your front and rear side marker lamp assemblies with this complete, easy to install kit. Includes four side marker lenses, two rear side marker lamp bezels and two reproduction front side marker bezels for models...
1968-69 Chevy II, Nova; Tail Lamp Bezel to Body Gaskets; Molded Rubber; Pair
Reproduction of the original tail lamp bezel to body gasket designed for use on 1968-69 Chevy II and Nova models. Each gasket is manufactured in OE quality molded rubber material replicating the original gasket in fitment and...
1968-69 Chevy II, Nova; Rear Tail Light Lens; Pair; GM Licensed
Reproduction of the original rear tail lamp lens designed for use on 1968-69 Chevrolet Nova models. Manufactured in quality acrylic injection molded lens material that replicates the original in design and appearance....
Reproduction under hood lamp assembly for a wide variety of 1958-71 GM models. Includes an in-line fuse, correct color wiring, and terminal end. This is a popular replacement under hood lamp assembly for your 1958-71 Impala,...
1968 Camaro; Headlight Housing; Rally Sport ; Passenger Side
Reproduction of the original headlamp housing designed for use on 1968 Camaro Rally Sport models. This housing attaches to the radiator support and holds the headlight components in place. Manufactured in stamped steel, each...
Headlamp Sealed Beam; 12 Volt; Low Beam; 5-3/4" Round; Tungsten
This replacement sealed beam headlamp bulb is perfect for maintaining the factory appearance and performance when the original burns out.
1968 Camaro; RS Headlamp Bell Crank Spring and Bracket Set ; 8 Piece Set
Keys onto lower end of headlamp bell crank and acts as an over center counter balance assist. This set includes two attachment brackets which install on the lower edge of the headlamp housing and allow correct closure of the...
1968 Chevelle; Malibu; El Camino; Park Lamp Assembly; LH or RH; Replaces GM# 916173
Reproduction front park lamp assembly for all 1968 Chevelle, Malibu and El Camino models. Each park lamp assembly is manufactured with a stamped steel housing and an amber acrylic lens replicating the original in quality and...
1967-68 Chevrolet Truck, Suburban; Park Lamp Lens; Amber; RH Passenger Side
Reproduction amber park light lens for 1967-68 Chevrolet pickup truck models. Each lens is manufactured in quality UV acrylic replicating the original in design, appearance, and fitment.
1967-68 Chevrolet Pickup, Suburban; Park Lamp Lens; Amber; LH Driver Side
Reproduction amber park light lens for 1967-68 Chevrolet pickup truck models. Each lens is manufactured in quality UV acrylic replicating the original in design, appearance, and fitment.
1968-69 Chevy II, Nova; Back Up Lens; Pair; GM Licensed
Reproduction of the original rear back up lamp lens designed for use on 1968-69 Chevrolet Nova models. Manufactured in quality acrylic injection molded lens material that replicates the original in design and appearance....
1967-72 Chevy, GMC Fleetside Pickup, Blazer, Jimmy; Back Up Light Housing; LH; Driver Side
Reproduction back-up lamp housing for 1967-72 Chevrolet and GMC Fleetside pickup models, 1969-72 Blazer, and 1970-72 Jimmy models. Each housing is manufactured in stamped steel to factory dimensions for an authentic...
1955-68 Bel Air, 150, 210 Impala, Biscayne, Olds; Dome Lamp Lens; Round; Ivory
Reproduction of the original style round dome lamp lens designed for use with various 1955-68 Chevrolet and Oldsmobile full size models as listed. Each lens is manufactured in injection molded ABS featuring the correct ivory...
H4 Xenon 130/90 Watt High Performance Headlamp Bulbs - Pair
Upgrade your lighting to Hyper White Xenon Bulbs and enjoy a light that simulates daylight and reduces glare, fatigue and eye strain. These super bright 130/90 watt replacement bulbs light up the night to increase driving...
1967-69 Camaro, 1967-68 Firebird; Dome Lens and Base Kit; with Wiring Harness
Reproduction of the original components needed to replace the done lamp base, done lamp lens, and wiring harness on 1967-69 Camaro models, and 1967-68 Firbeird models. This convenient kit is designed to replace the original...
1955-68 Chevrolet, Oldsmobile; Dome Lamp Bezel Trim Ring; Round
Reproduction dome lamp trim bezel for 1955-68 Chevrolet full size models. This dome lamp bezel rim was installed in 1956-57 Chevrolet hardtop, 1955-68 Chevrolet full size sedan, and 1965-68 Chevrolet full size station wagon...
1967-72 Chevrolet, GMC, Suburban, Panel Truck; Tail Light Lens; LH or RH; Each
Reproduction of the original tail light lens designed for use with 1967-72 Chevrolet, GMC Suburban, and 1967 Chevy Panel truck models. Each lens is manufactured in quality injection-molded UV stable acrylic material as...
1967-68 Chevy Fleetside Pickup, GMC Suburban; Rear Tail Light Bezel; LH Drivers Side
Reproduction of the original tail light bezel for 1967-68 Chevrolet Fleetside pickup trucks and 1967-68 Chevy, GMC Suburban models. Each bezel is manufactured in stamped aluminum replicating the original in quality and...
1968 Impala, Bel Air; Tail Light Lens; with Single Ring; with GM Markings; Each
Reproduction of the original rear tail light lens designed for 1968 Impala (non SS) and Bel Air models. Manufactured in injection molded acrylic lens material replicating the original in quality and design. Correct...