Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
OER® reproduction wing nut for many GM models. This spare tire hold down nut is used in conjunction with the spare tire hold down rod. Manufactured in stamped steel and features correct threads and wing nut design....
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
This convertible is crafted from Stayfast, a heavy-duty three-ply composite canvass material. It consists of an acrylic square weave facing, rubber inner-layer, and cotton backing. Stayfast is a popular upgrade to vinyl...
1959-80 AMC, GM, Ford, Mopar; Trico Windshield Wiper Blade; 15" Length; Various Models; Each
Reproduction 15 inch "TRICO Style # PR-15-2W" wiper blade for a wide variety of classic vehicle models. Each blade features stainless steel construction and is loaded with a period-correct TRICO RF-15 style insert with a...
This convertible is crafted from Pinpoint vinyl, a heavy-duty vinyl composite material. It consists of an outer layer of PVC and an inner layer of dyed, 100-percent-cotton sateen. This vinyl design is original to most...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
1959-72 Buick; Chevrolet; Oldsmobile; Pontiac; Trunk Lock Latch Assembly; Manual; Various GM Models
This OER® reproduction of the original manual trunk lid latch assembly. This correct reproduction installs in the trunk area and is connected to the trunk lock cylinder by the handle shaft. Allows the trunk lid to lock...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1963-67 Chevrolet, Oldsmobile, Pontiac; Hood Hinge Assembly; RH Passenger Side
Reproduction hood hinge assembly for various 1963-67 GM models. Each hood hinge is manufactured from stamped steel to factory specifications assuring a quality replacement. Features correct mounting points for ease of...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
Reproduction back window glass for 1966-67 Chevrolet Chevelle, Buick Skylark, Oldsmobile Cutlass, and Pontiac GTO 2-door hardtop models and various BOP 2-door sedan models. Replace scratched or damaged original with this OEM...
OER reproduction of the original front windshield glass for various 1966-67 Buick, Chevrolet, Pontiac, and Oldsmobile A-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
OER reproduction of the original front windshield glass for various 1966-67 Buick, Chevrolet, Pontiac, and Oldsmobile A-Body models as listed. This windshield is manufactured with tempered laminate safety glass that meets the...
Correctly reproduced glass windshield washer bottle that was common in various 1955-72 General Motors vehicles. Each bottle is manufactured in the correct factory configuration that replaces the old or missing original...
Reproduction door vent glass frame for 1966-67 GM A-Body coupe and convertible models (except El Camino). Manufactured to factory specifications featuring a polished chrome plated finish as original. This frame surrounds the...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass to factory...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass to factory...
This premium reproduction LH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style smoke gray tinted...
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
New power window motor for various GM passenger car and truck models. Manufactured to factory specifications for an original fit and function. This original style power window motor was used in wide variety of GM models....
This premium reproduction LH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in light green tinted glass to factory...
This premium reproduction RH door glass is designed for 1966-67 Buick Special/Skylark, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in light green tinted glass to factory...
1959-76 GM; Convertible Top Boot Silde Rail Retainer; with 8 Mounitng Holes
Reproduction of the original style convertible top boot retainer for 1959-76 Buick, Chevrolet, Pontiac, and Oldsmobile convertible models (except Camaro, Firebird). The top boot will slide into this retainer in order to hold...
1964-67 GM A-Body; Convertible Top Hydraulic Hose Set; with Power Top; White Hose
Reproduction of the original hydraulic hose set designed for use with 1964-67 GM A-body convertible models as listed. Original hoses for these early convertibles are nearly impossible to find, making this reproduction set the...
1966-67 Chevelle, GTO, Cutlass; Convertible Top Side Tension Cables; 34" Long
Reproduction convertible top side tension cables for various 1966-67 GM A-Body models including Chevelle, Malibu, GTO and Cutlass. These cables are part of the apparatus that allows your convertible top to go up and down...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile convertible models. Manufactured in quality zinc die-cast metal, each...
1964-67 GTO, 1966-67 Chevelle, Skylark, Cutlass; Door Window Regulator; Manual; LH
Reproduction window regulator for 1964-67 GM A-body models with manually operated door windows. Each regulator is manufactured to replicate the original in quality and design. The latest manufacturing methods are employed to...
1964-67 GTO, 1966-67 Chevelle, Monte Carlo, Skylark, Cutlass; Door Window Regulator; Manual; RH
Reproduction window regulator for 1964-67 GM A-body models with manually operated door windows. Each regulator is manufactured to replicate the original in quality and design. The latest manufacturing methods are employed to...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1967-69 Camaro, Firebird; Convertible Top Boot Interior Snaps; with Screws; 4 Piece Set
Reproduction convertible top boot snap and screw set for 1967-69 Camaro and Firebird models and any other vehicle that requires a screw-on style snap. These snaps are used to secure the convertible top to the inner rear...
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
Reproduction of the original convertible top latch knuckle designed for use with a variety of 1964-72 GM convertible models. Manufactured in quality zinc die-cast metal, each knuckle is built to OE factory specifications for...
This premium reproduction RH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in clear glass to factory...
This premium reproduction RH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style green tinted glass...
This premium reproduction LH quarter glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle Malibu, Oldsmobile Cutlass, and Pontiac Tempest Convertible models. Manufactured in factory-style green tinted glass...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
This premium reproduction LH vent glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass...
This premium reproduction RH vent glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in smoke gray tinted glass...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
This premium reproduction RH vent glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in clear glass to factory...
This premium reproduction LH vent glass is designed for 1966-67 Buick Special/Skylark, Chevrolet Chevelle, Oldsmobile Cutlass, and Pontiac Tempest 2 Door Hardtop and Convertible models. Manufactured in clear glass to factory...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1959-79 AMC, GM, Ford, Mopar; "TRICO" Windshield Wiper Blades; 15" Length; Pair; Various Models
Reproduction of the original 15" "TRICO Style # PR-15-2W" wiper blades designed for a wide variety of classic vehicles including GM, Ford, Chrysler, Studebaker, Mercury, AMC, and International models. Each blade features...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1961-87 Buick, Chevrolet, Pontiac, Olds; Door Lock Set; with Generic Logo Keys; Bright Finish
Reproduction door lock cylinders for various 1961-87 Buick, Cadillac, Chevrolet, Pontiac, and Oldsmobile models as listed. Includes two door lock cylinders with bright finish face finish, two generic logo keys, cylinder...