Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head
Replacement chrome plated trim screws used on various GM vehicles. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is original...
Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
1965-69 Impala, Camaro, Bel Air, Firebird; Hood Insulation Fastener; Black Nylon
Replacement black nylon 2" square head hood insulation retainer is just what your classic vehicle needs to keep your original hood insulation where it belongs...attached to the hood. This retainer is a service replacement for...
1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; Each
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...
1967-68 Mustang, Cougar; Fender Apron and Shock Tower Assembly; Drivers Side; EDP Coated
1967-68 Mustang and Cougar full shock tower assembly with 1-piece inner fender apron, shock tower and frame rail welded together. Fender aprons feature correct holes to accept the fender nuts and is a one-piece style to...
Why leave your convertible top boot in the trunk exposed when you can keep it protected with this special top boot vinyl storage bag. Designed to keep your top boot safe and clean, this bag prevents dust, dirt, and damage...
U-Nut; M6 - 1.0; Panel Range.030" to.160"; Center of Hole to Edge: 17/32"; Black Phosphate; Each
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160") Specifications: OE #: 11503957 Quantity: Individual Clip...
1967-68 Mustang, Cougar; Door Glass Assembly; Coupe; Clear Glass; Passenger Side
Correct reproduction of the original door glass assembly designed for 1967-68 Mustang/Cougar coupe. Includes the correct lower channel to completely replace the entire glass unit. The glass carrier is manufactured from...
3/8"-16 x 15/16" Bumper Bolt With Flat; Zinc Plated Shank; Stainless Steel Flat Head; Each
Correct replacement style bolt to replace the original missing or damaged bumper bolt. Each bolt is manufactured to original specifications and will match the original. Fits a variety of different years and models. Measures...
High-quality reproduction of the stainless steel "Aero" Anti-Wind-Lift wiper blades designed to fit 7mm wide bayonet-style wiper arms. Popularized in the 1960s and 1970s to combat wind lift at high speeds, these 15" wiper...
1964-68 Mustang, Cougar; Front Windshield Glass; Clear; OER
OER reproduction of the original windshield glass for use with 1964-68 Mustang and 1967-68 Cougar models. Glass is manufactured to original factory specifications replicating the original configuration for an authentic...
1966-70 Mustang, Cougar; Windshield Wiper Arm; Flanged End Cap; LH or RH; Polished Finish
Reproduction of the original windshield wiper arm for use with 1966-70 Mustang and 1967-70 Cougar models. Manufactured to factory specifications in stainless steel, featuring the correct shape and finish for proper fitment...
1967-68 Mustang, Cougar; Outer Door Handle Set; with Hardware
Reproduction outer door handle set for a wide variety of Ford and Mercury applications. This economical set includes both left and right chrome handles, button assemblies, gaskets and all mounting hardware. Each handle is...
Ford, GM, Mopar; Windshield Wiper Blade Refill; 16"; Pair
Reproduction of the windshield wiper blade inserts for various models equipped with 16" wiper blades. Each blade insert is manufactured for perfect fit, function and appearance when used with the proper blade assembly....
1967-68 Mustang, Cougar; Door Glass; Coupe; Tinted; Passenger Side
Reproduction of the original door glass designed for use with 1967-68 Mustang and Cougar coupe models. Each door glass is manufactured to factory specifications featuring correct glass shape and contours for proper fitment...
1967-70 Mustang, Cougar; Hood Hinge; Driver Side; EDP Coated
Reproduction hood hinge for 1967-70 Mustang and Cougar models. Each hinge is manufactured in stamped steel replicating the original in design and fitment. Produced with quality materials and correct mounting locations. Comes...
1967-68 Mustang, Cougar; Wiper Motor Transmission Arm
Reproduction wiper motor transmission linkage assembly for 1967-68 Mustang and Cougar models. Each transmission assembly is manufactured in stamped steel to exact factory specifications replicating the original in quality,...
1967-70 Mustang; Hood Hinge; Passenger Side; EDP Coated
Reproduction hood hinge for 1967-70 Mustang and Cougar models. Each hinge is manufactured in stamped steel replicating the original in design and fitment. Produced with quality materials and correct mounting locations....
1960-84 Windshield Wiper Blade; 16" Trico; Rainbow Type; 1/4" Bayonet Connector; Matt Stainless
Reproduction of the original Trico Rainbow Type wiper blade designed for various models originally equipped with Trico blades. Each wiper blade will replace the original and offer years of service. Each blade comes complete...
1965-2002 GM; Door Lock Striker Washer; 3.50MM Thick; Each
Correct reproduction of the original threaded striker washer for use on 1965-2002 Buick, Chevrolet, Pontiac, and Oldsmobile models as listed. The door lock striker washer is installed on the door jamb for either the right or...
1964-68 Ford Mustang/Mercury Cougar; Vent Window Glass; Smoke Gray; LH
Replace your side vent window glass with smoke replacement glass. This is the replacement wing winow glass only, frame around glass and weatherstrip are not included (sold separately). Sold individually. Fits right hand...
Tapping Screw; #8 x 1"; Phillips Pan Head; A/AB; Black Oxide
This reproduction screw can be used on many applications where a #8 X 1" phillips pan head Black Oxide plated tapping screw is needed. Sold individually.
Reproduction zinc-plated bumper bolt with a polished stainless steel capped head for a variety of GM, Ford and Mercury applications including 1958-66 Chevrolet, 1965-68 Ford Mustang, 1960-67 Ford Falcon and 1960-65 Mercury...
1967-68 Mustang, Cougar, 1967 Fairlane, Falcon, Comet; Door Latch Assembly; Passenger Side
Reproduction of the original latch assembly designed for use with 1967-68 Mustang, Cougar, 1967 Fairlane, Falcon, and Comet models. Each door latch is constructed of quality stamped steel replicating the original in quality...
Reproduction 16" windshield wiper blade for a variety of GM vehicles that require a 16" side lock blade. Each blade is manufactured in stainless steel and finished in satin silver as original. Fits the side lock style...
1967-68 Mustang, Cougar; Door Hinge; Upper; Stamped Steel Style; LH Drivers Side
Reproduction of the original drivers side upper door hinge designed to replace the original for 1967-68 Mustang and Cougar models. After years of continuous use, your doors can begin to have problems associated with sagging....
1964-68 Mustang/Cougar; Vent Window Glass; Smoke Gray; RH
Replace your side vent window glass with smoke replacement glass. This is the replacement wing window glass only, frame around glass and weatherstrip are not included (sold separately). Sold individually. Fits right hand...
1967-68 Mustang, Cougar; Upper Door Hinge; Stamped Steel Style; RH Passenger Side
Reproduction of the original passenger side upper door hinge designed to replace the original for 1967-68 Mustang and Cougar models. After years of continuous use, your doors can begin to have problems associated with...
1964-68 Mustang, Cougar; Vent Window Glass; Tinted; Drivers Side
Reproduction of the original vent window glass for use with 1964-68 Mustang and 1967-68 Cougar models. Each wing window is manufactured to factory specifications featuring correct glass shape and contours for proper fitment...
1967-68 Mustang, Cougar Vent Window Glass Frame; Drivers Side
Reproduction of the original vent glass window frame designed for use on 1967-68 Mustang and Cougar models. Each frame is manufactured in zinc die cast metal, chrome plated and polished to perfection. Correct for 1967 LH...
1964-68 Mustang, Cougar; Vent Window Glass; Clear; Drivers Side
Reproduction of the original vent window glass for use with 1964-68 Mustang and 1967-68 Cougar models. Each wing window is manufactured to factory specifications featuring correct glass shape and contours for proper fitment...
1964-68 Mustang, Cougar; Vent Window Glass; Clear; Passenger Side
Reproduction of the original vent window glass for use with 1964-68 Mustang and 1967-68 Cougar models. Each wing window is manufactured to factory specifications featuring correct glass shape and contours for proper fitment...
Spring Steel Rod Clip, for Carburetor, Door, Tailgate; LH Driver Side
OER® Authorized reproduction of the original style carburetor rod to accelerator rod clip for various models. Each clip is manufactured in stamped steel and heat treated for strength and durability. For use on the various...
1964-98 GM; Door Lock Striker Bolt Washer Shim ; 1.25MM Thick ; Each; Various Models
Reproduction of the original door striker bolt shim manufactured in die-stamped steel and finished in clear zinc coating. Used to correctly position the door striker bolt for proper alignment with the door latch assembly. Use...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1959-79 Ford, Mercury; Window Channel Roller Set ; 50 Piece Set
Reproduction of the original window channel roller designed to fit a wide variety of 1959-79 Ford and Mercury applications. These plastic rollers are supplied with the metal spring clip retainer. These also may be referred to...
Hex Washer Head Spin Lock Bolt; 5/16" X 18 X 1-1/4"; Phospate Coating" Each
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished iin a black phospate coating for an authentic original appearance and corrosion resistance. Sold individually. Use as required. Product Specifications:...
1967-81 GM; Hex Head SEMS Body Bolt Set; 3/8"-16 x 1"; for Hood Hinges; 8 Piece Set; Various Models
OER Authorized, direct replacement hood hinge to fender bolt set for various GM vehicles. This kit consists of a quantity of 8 black phosphate coated (9/16" head size) hex washer head SEMS body bolts with 3/8"-16 x 1" specs....
Bumper Bolt; Stainless Steel Cap; Flat Head; 3/8"-16X 15/16"; Package of 25
Package of 25 reproduction bumper bolts that measure 7/16-14 x 1-1/2" with a stainless steel cap and round head. Willl fit a wide variety of vehicles including 1957-72 Ford F-Series Truck and many other Ford Motor Company...
1959-79 AMC, GM, Ford, Mopar; "TRICO" Windshield Wiper Blades; 15" Length; Pair; Various Models
Reproduction of the original 15" "TRICO Style # PR-15-2W" wiper blades designed for a wide variety of classic vehicles including GM, Ford, Chrysler, Studebaker, Mercury, AMC, and International models. Each blade features...
1967-68 Mustang; Wiper Motor Mounting Bracket; with Hardware
Reproduction wiper motor mounting bracket for 1967-68 Mustang models. This reproduction wiper motor mounting bracket attaches to the firewall so the wiper motor can attach to the bracket. This stamped steel bracket mounts to...
Black phosphate-coated hex head bolts with a washer. Measures 3/8"-16 x 1" SEMS with 1" outside diameter to fit a variety of applications, including the hood latch on 1970-81 Firebird, and 1973-80 Chevrolet or GMC truck,...
1965-67 Mustang, Cougar; Spare Tire Mounting Kit
Reproduction of the original spare tire mounting kit for 1965-67 Ford Mustang, Mercury Cougar and various other Ford - Mercury models. Protect your spare tire and prevent unnecessary movement of the spare tire. Kit includes:...
Hex Washer Head Spin Lock Bolt; Phospate Coating; 5/16" X 18 X 1-1/4"; Set of 24
Reproduction 5/16" x 18 x 1-1/4" hex washer head spin lock bolt finished in a black phospate coating for an authentic original appearance and corrosion resistance. Set of 24. Use as required. Product Specifications: Thread...
Reproduction of the original Trico Style wiper blade refill designed for use on the various models that require a 16" Trico style rainbow type wiper blade. Each wiper blade assembly will replace the original and offer years...
#10-24 x 1"; Phillips Oval Head Head Machine Screw; Stainless Steel
Stainless Steel Phillips #10-24 x 1" Oval Head Head Machine Screw. Sold individually. Specifications: Thread Diameter : 10-24 Length : 1" Head Style : Phillips Oval Head Size : Std Material : 18-8 Stainless Steel
Plastic Retainer; Push-In Type Rivet; 7/8" Head Diameter; 1-3/64" Stem Length; For 1/2" Hole
Reproduction push-in retainer designed to attach the front urethane bumper cover to the impact bar. Push-in style. 28.2mm long. Manufactured in durable ABS black plastic material. Sold individually. Use as required. Replaces...
1963-83 Ford, Mercury; Spare Wheel Mounting Bolt Wing Nut; 3/8"
Reproduction of the original style spare tire wing nut use to hold your Mustang's spare wheel against the trunk floor. Will fit 1965-67 Mustang and a variety of other models. Ford Applications: 1960-1967 Ford Falcon 1968-1972...
U-Nut Set; M6 - 1.0; Panel Range.030" to.160"; Black Phosphate; 25 Piece Set
Black phosphate metric u-nut or foldover nut, that measures M6-1.0 to install and secure various components. Fits panel thickness from.80mm to 4 mm. (.030" to.160"). Set of 25 u-nuts. Specifications: OE #: 11503957 Quantity:...
Replacement black nylon 1-3/4" hood insulation retainer is just what your GM vehicle needs to keep your original hood insulation where it belongs... attached to the hood. This retainer is a service replacement for most models...
Installation hardware set for various 1985-92 Camaro models including IROC-Z models. Each set includes 18 of reproduction # 11508023 bolt. Specifications: Quantity: Set of 18 Class: 9.8 Color: Black Phosphate Material: Steel...
OER® reproduction of the original Trico RF-15 wiper blade insert/refill set for 15" TRICO wiper blades. These RF-15 style inserts are manufactured with period-correct stainless steel vertebrae and a precision wiping edge...
Tapping Screw; Hex Washer Head; #8-18 x 1/2" Long; Black Oxide
Hex, washer head #8-18 x 1/2 tapping screw, in phosphate and oil coating for various applications including mounting grill to various classic vehicles Screw Specs: Description : Tapping Screw Screw Size : #8 Length : 1/2"...
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
Bolt, 1/4-20 x 1-3/16" Dog Point Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 5/16-18 x 1" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 5/16-18 X 7/8" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...
Bolt, 3/8-16 X 1" Pointed Tip With Free Spinning Washer, Black Phosphate, 10 Piece Set
Replacement bolt used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality...